Page 2 of 5 FirstFirst 12345 LastLast
Results 13 to 24 of 49
  1. #13
    Member Array
    Join Date
    Jan 2011
    Location
    Tasmania
    Car:
    FN2R
    This might help me out as well, i'm thinking of getting Rota boosts in 16x7 +40 something offset for my cxi hatch, what coilovers/ride height should i look at?

  2. #14
    Newcomer Array
    Join Date
    Feb 2011
    Location
    Melbourne
    Car:
    Ek civic
    I got a pair of Tein Super streets from the states for 900 US and there really comfy and they will have enough drop easily

  3. #15
    Member Array
    Join Date
    Mar 2009
    Location
    Shitnee
    Car:
    2 Door EK GLi
    900 for tein coilovers? not bad. may aswell pay 500 more and get coilovers.. but i dont want a bumpy ride in my daily
    ahh the decisions

  4. #16
    Member Array
    Join Date
    Mar 2009
    Location
    Wollongong
    Car:
    Civic EK Si '98
    Sounds like you're pretty sensible mate - I recently just installed Spoon sports progressive springs on my EK1 (-20mm drop) and I couldn't be more happier.

    While it's still riding on stock shocks atm (the other benefit of not dropping too much and is stated on the Spoon website as being designed for stock shocks) the ride comfort is brilliant (firm and not harsh at all), corner speed entry and power through is fantastic (also have front tower bar, no rsb yet), braking has improved and the car is not upset by bumps mid-corner at speed. Often what coilovers will do to you.

    I hope you don't mind me posting these pics (I can remove if you like), but I thought it would relevant for you to see how much my car has dropped after installation - it has 2 finger gap at rear and 3 finger gap at front (I have small fingers lol)

    Tyres are 195/50/15.

    BEFORE:


    AFTER:


    BEFORE:


    AFTER:



    Alvis
    Last edited by Alvis; 24-03-2011 at 08:19 PM.
    HONDAOEMMUGEN

    JDM/Mugen inspired EK sedan build thread: http://www.ozhonda.com/forum/showthr...ss-pics/page34

  5. #17
    Member Array
    Join Date
    Dec 2008
    Location
    Brisbane
    Car:
    Milano Red EM1, CU2 Euro
    Quote Originally Posted by Chriskoss View Post
    900 for tein coilovers? not bad. may aswell pay 500 more and get coilovers.. but i dont want a bumpy ride in my daily
    ahh the decisions
    not all coilovers are that stiff

  6. #18
    Newcomer Array
    Join Date
    Feb 2011
    Location
    Melbourne
    Car:
    Ek civic
    Ok Tein SS are very nice for the street. They are not as stiff as most coilovers there designed for the Street and comfort and still give you that extra bit of performance and appearance



    (This was About a 2.4" drop mayby a bit more)
    Hope it helps
    Last edited by Lbarbz; 25-03-2011 at 11:33 AM.

  7. #19
    Banned Array
    Join Date
    May 2008
    Location
    Vaucluse NSW
    Car:
    EKB20 > EGB18C
    slam the slut untill the rim is tuckin


















































































    and add ITBS

  8. #20
    Member Array
    Join Date
    Mar 2009
    Location
    Shitnee
    Car:
    2 Door EK GLi
    Alvis, thankyou so much for the pics. Gives a real good example of how much those springs lower a car.
    20mm drop looks wicked. I'm liking it alot. very nice car.. saw it in your build thread too.
    where'd you source the springs from if you dont mind me asking.

  9. #21
    Member Array
    Join Date
    Mar 2009
    Location
    Shitnee
    Car:
    2 Door EK GLi
    p.s lbarbz very nice car too. how much of a drop did the tein SS's give you (or what have you got them dropped to?)

  10. #22
    Newcomer Array
    Join Date
    Feb 2011
    Location
    Melbourne
    Car:
    Ek civic
    In the pic up up top its about 2.4" drop but at the moment i got it on the lowest at the front and about 10mm left on the rear which is about a 3.1" drop ill post some pics up tomorrow for you.
    Last edited by Lbarbz; 25-03-2011 at 11:33 AM.

  11. #23
    Member Array
    Join Date
    Mar 2009
    Location
    Wollongong
    Car:
    Civic EK Si '98
    Quote Originally Posted by Chriskoss View Post
    Alvis, thankyou so much for the pics. Gives a real good example of how much those springs lower a car.
    20mm drop looks wicked. I'm liking it alot. very nice car.. saw it in your build thread too.
    where'd you source the springs from if you dont mind me asking.
    No problems mate, always helps when you can visualise it

    This is the website I bought them from - actually a NZ company so friendly on the dollar conversion was $400 delivered to my door. It's at the high end of the spring range, but quality over price pays off in the long run.

    http://www.fortyone.co.nz/


    Again, depends what you want (my drop is EK9 height) - a lot of guys still think this is too high, but again it's personal preference for me it's perfect compromise between performance and practicality

    OH, and this is a pretty good thread to read up on, has some info on spring rates, example pics of drops etc etc so might be worth a squizz if you get the chance

    http://www.ozhonda.com/forum/showthr...cks-on-Em1-Ek4

    Alvis
    HONDAOEMMUGEN

    JDM/Mugen inspired EK sedan build thread: http://www.ozhonda.com/forum/showthr...ss-pics/page34

  12. #24
    Newcomer Array
    Join Date
    Feb 2011
    Location
    Melbourne
    Car:
    Ek civic
    I remember when i was looking to buy suspension i was original just going to get springs but luckily i didn't cause i would of been disappointed in the end.

    How much of a drop do you want ill set my coils to roughly that height and ill post some pics that way you make the right decision.
    Keep it clean

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.