cu2 mods

**defconskylude** · 02-04-2011 02:24 PM

So today was a test fitment and the front lip obviously doesnt fit well around the foglight area. i trimmed around it and it looks good to me.

i got my s techs today and will be installing them tomorrow along with my LS460 tips.

i will be sanding down the lip tomorrow and paint matching it. also probably do a debadging while im at it

ill be putting 3M tape to get rid of the gaps and i still have to use a heat gun on the front lip since it warped on me when it was sitting in the garage.

IMG_2703 by defconskylude, on Flickr

IMG_2710 by defconskylude, on Flickr

IMG_2701 by defconskylude, on Flickr

IMG_2705 by defconskylude, on Flickr

IMG_2714 by defconskylude, on Flickr

IMG_2702 by defconskylude, on Flickr

IMG_2711 by defconskylude, on Flickr

IMG_2707 by defconskylude, on Flickr

**euroRwannabe** · 02-04-2011 03:46 PM

Originally Posted by MR_LATE

that is definately not considered as riced, nice and unique, and like the colour, makes me wanna spray it too!
nice work MR. LATE.

P.S! Lower it!

**MR_LATE** · 02-04-2011 05:14 PM

thank you eurowannabe, ill lower when i have the gesh ($$$)

but maybe lower it when i find the rims for it,, (i want defcons' rims,, its my fave)
i just realised how to say ur username, its like you wanna be, but with a euro,, nevermind :P
kinda like a blue euro, blue-ro

**CU2 Euro 09** · 02-04-2011 05:30 PM

Looks good MR_LATE, not ricey

**Kwangstuhhh** · 02-04-2011 06:14 PM

how long did it take?...after doing it once i sorta dun wanna do it again hahaha

**MR_LATE** · 02-04-2011 10:37 PM

Originally Posted by Kwangstuhhh

how long did it take?...after doing it once i sorta dun wanna do it again hahaha

Mine took six. Had problems with the paint I bought then had to eat lunch + raining. Had to blow dry it. I did my friends one took only 3 hours.. Also it's good to have someone helping

**MR_LATE** · 02-04-2011 10:38 PM

Cheers CU2 euro 09

**furythree** · 03-04-2011 12:50 AM

omg nice MR Late
where did u get the paint? how much did it cost?
id like to know how u did the wiring for the LED in the footwells. mine are using the car charger. but id like to know if theres a simple cleaner method
are u in syd mate? should totaly meet up and show me how u do all this

oh btw

MUGEN POWER! XD!

3rd and 4th pics are the best

Sooooo farken happy today!
More pics tommorrow, my iphone overheated and died and corrupted most of my photos today after i took them

. probably couldnt handle its awesomeness

but its now SOOOOO LOWWWW. i actually couldn't get out of the driveway! scraped the left underside already (like graze completely invisible cause its on the underside)

but yeh, teins + kit = lowwwwww

i ended up having to REVERSE out of the driveway (i have a VERY LONG CURVED driveway, so this is harder than it sounds)

Also, the side skirts cover up my Massive dent and graze completely! so no need for $800 panel beater fix just a $700 bodykit install :P

Now i want a new grill now and painted calipers!

bad news tho was that i had to go out in the arvo and didnt drive my euro cause i was supposed to let the polyeurothane set. so i drove my mum's lexus...then reversed into a pillar sideways (reversing out of a carpark) and totally smashed her door ><. i cringed so hard, ruined the rest of my day.

so finally did up my car and fixed my graze...but totally ruined my mums and grazed hers....all on the same day

oh well ><

I took better pics of the kit. theres a few particular angles that make it look so good and agressive. i had too much glare today,so u cant really see it that well. shame my fone died.

I am however, a bit worried about when i have to go on driveways, that nose is gunna scrape for sure. perhaps bigger wheels? may lift up the car a bit? but at the same time, if i took it to a shop to get rims fitted...dunno how they are gunna jack up the car on those big lift things....because the side skirts hang low under past the undercarriage i think...so those lifts that holdthe car by the bottom through the sides may ruin the skirts :S

overall, very satisfied with the job

**MR_LATE** · 03-04-2011 11:15 AM

WHOA MUGEN!!! That's awesome. Very nice pics.

Btw I got paint from Autobarn, caliper paint gold and clear. And if u open the trims to your door and connect to power source the courtesy light in the doors. It shud work. I didn't install myself but that's what he told me. And I'm in Brisbane

Loving the kit. U gonna change the grill?

**Rudy** · 03-04-2011 12:44 PM

Sick ride Fury, the mugen kit is clean as hell. Cant remember if you have the tein spring or the SS, but if its the SS, try raising it up 10mm or so. It will still look nice but a bit more practical. Where did you get that red honda sticker btw?

**defconskylude** · 03-04-2011 02:56 PM

drop looks soo much better eH?

heres what i did today.
spray can painted my kit, m3 spoiler, mud guards
ls460 tips installed
tein s techs installed
debadged

next mods
install roof spoiler
35% tint
blue mirror tint
plasti dip rear chrome trim

IMG_2717 by defconskylude, on Flickr

IMG_2719 by defconskylude, on Flickr

IMG_2723 by defconskylude, on Flickr

IMG_2728 by defconskylude, on Flickr

IMG_2732 by defconskylude, on Flickr

IMG_2736 by defconskylude, on Flickr

IMG_2737 by defconskylude, on Flickr

IMG_2740 by defconskylude, on Flickr

IMG_2743 by defconskylude, on Flickr

IMG_2747 by defconskylude, on Flickr

IMG_2750 by defconskylude, on Flickr

IMG_2751 by defconskylude, on Flickr