Results 1 to 12 of 19

Threaded View

  1. #2
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by aroy7 View Post
    Can say my Honda dealer tweak anything in the engine\computer to give a bit more torque\power?
    Yes, but no, not from Honda dealer

    You can have it re-flashed but it'll cost you something like $1500 and it'll be a moot point if you don't give it the Intake/Header/Exhaust treatment.

    It doesn't mean you can't do anything, you CAN do the following, but it probably makes bugger all difference:
    * Replace air filter to a K&N
    * Reset the ECU by disconnecting the battery for 10 min.
    * Change the engine oil to a full synthetic and thinner oil, something like 5w-30 or 0w-40
    * Add a Voltage Stablizer and ground wire kit ( I found it making my idle smoother)
    * Give the fuel injection system a clean (or run BP ultimate for 2 mth...)

    For the K24 to shine you really need to give it at least a I/H/E treatment, at least the intake.... and as with all honda engine's, low end power/torque is never our strong suit...
    Last edited by Fredoops; 13-04-2011 at 11:21 PM.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.