and that little plastic gromet thing that connects to the window?
bought a replacement pair about a year ago from honda. just call up any dealership and hopefully the spare parts will hook u up. from memory they were $12 but dont quote me on it.
I would love some wire tucking on my ek! Any help when your free!
I'm sure you'll be able to do it your self man! Do it while the engine is out! Just gotta cut and extend wires. Same time, slip it in somewhere so you can't see it
I'm sure you'll be able to do it your self man! Do it while the engine is out! Just gotta cut and extend wires. Same time, slip it in somewhere so you can't see it
Took my 4hrs to do that
i believe you can wire tuck the headlight harness without putting the original harness under the knife, by running the harness through the fender and not through its existing firewall entry? i read an article about it somewhere. by all means if you know what you're doing you can go extend wires by cutting but some may end up running into electrical issues later down the track? there was also talk about keeping the distributor wires (blue and grey correct me if i'm wrong) intact and not extending them as problems arise?
not attacking anyone here, as i've been looking up info on wire tucks as well, hopefully doing it soon lol.
i believe you can wire tuck the headlight harness without putting the original harness under the knife, by running the harness through the fender and not through its existing firewall entry? i read an article about it somewhere. by all means if you know what you're doing you can go extend wires by cutting but some may end up running into electrical issues later down the track? there was also talk about keeping the distributor wires (blue and grey correct me if i'm wrong) intact and not extending them as problems arise?
not attacking anyone here, as i've been looking up info on wire tucks as well, hopefully doing it soon lol.
anyone wanna confirm/shed light?
i've actually tried using the same harness and hid it somewhere, but unfortunately, the harness was too short to reach the headlights/indicators and etc, i've done wire tucking before and it was a job well done. The way i wire tuck it, i had spare harness which had the same coloured wirings.. so i used that for the extension. In order after than, i carefully stripped it, soldered each one and use those heat rubber thing (where you slip it in where the connection is, heat it up and it kinda squeezes together - i forgot what its called)
Im not wire tucking those major wires like distributor or anything, just doing the ones that are safe to do if you know what i mean
back to topic ; i installed my EG6 cluster which i received last night
Reply With Quote
Originally Posted by curtis265
Bookmarks