EP3 Type R

[Importsneezer]

If you want nice fitment, can I ask why you want 8.5? 17x8 35 offset will sit just nice!

I may have heard wrong but I thought 8 wouldnt fill the guards up.
Wat tyre size should I be looking at?.on. 17x8 +35.

[spookz]

17x8 with an offset of +35 will fit really nicely.
Im planning on running that size and offset with 215/45R17 tires, as I might rub with 225.

[Nepolian]

Does anyone actually use the ep3 for it's designed use ....by the very Honda gawdz themselves ? All I see is a bunch of chit chat about who's got 8 inches. I've lived up to now with 6.5 inches and it's the way you use it not the size !

Eveyones too soft here. May as well go buy Mx5's yeah!

I may have heard wrong but I thought 8 wouldnt fill the guards up.
Wat tyre size should I be looking at?.on. 17x8 +35.

215/225 is fine even lowered

[Lukezen27]

Eveyones too soft here. May as well go buy Mx5's yeah!



215/225 is fine even lowered

Well ya can’t accuse me of being too soft.....
My engine mount, the oil filled one we just replaced is about to go pop!
Again!!

[Nepolian]

Well ya can’t accuse me of being too soft.....
My engine mount, the oil filled one we just replaced is about to go pop!
Again!!

What u mean? It either goes poop or it doesn't?

[Lukezen27]

What u mean? It either goes poop or it doesn't?

Small amount of oil pushing passed and small crack

[Jibz]

Well ya can’t accuse me of being too soft.....
My engine mount, the oil filled one we just replaced is about to go pop!
Again!!

Damn. Are you using ESMM on the bottom 2 mounts? My top engine mounts are in good shape since I put the ESMM's into the car shortly after I got it, almost 2 years ago now.

I've read that there can be alot of stress (that could result in cracking) on the Kiddracing header (or any other aftermarket header without flex pipes if we're not running some kind of stiffer engine mount or torque damper to reduce the movement of the engine.

[Lukezen27]

Damn. Are you using ESMM on the bottom 2 mounts? My top engine mounts are in good shape since I put the ESMM's into the car shortly after I got it, almost 2 years ago now.

I've read that there can be alot of stress (that could result in cracking) on the Kiddracing header (or any other aftermarket header without flex pipes if we're not running some kind of stiffer engine mount or torque damper to reduce the movement of the engine.

I'm running innovative mounts, reds

Rear and left

haha

[Nepolian]

Small amount of oil pushing passed and small crack

Dude, this is an open forum, too much information!

[Lukezen27]

Dude, this is an open forum, too much information!

Yeah your right

We shouldn't air our dirty laundry

[Blackep3]

Any one know of a good set of syncro's for an ep3 gear box??? 3rd gear has gone walk abouts

[Nepolian]

Any one know of a good set of syncro's for an ep3 gear box??? 3rd gear has gone walk abouts

Honda dealers will be able to get them. You have your GB oil and clutch checked yet?