cu2 mods

[MR_LATE]

Ok.. so you hate "idiots" who have their low beams set incorrectly, but you knowingly and deliberately blind oncoming traffic with you wanker foggies... so who is the idiot again?

lol i am...i am an idiot, sometime i drive past a parked car and the rear view mirror reflects the hid light back at me, bam! shit my pants cus i thought i got done for speeding hehehe

[euRo_noob]

Ok.. so you hate "idiots" who have their low beams set incorrectly, but you knowingly and deliberately blind oncoming traffic with you wanker foggies... so who is the idiot again?

I don't really care, if I get dicked, then it's my fault. If they don't like it, they should high beam me but they don't. And if their low beams are so high, they should adjust them. Most of the guys with their lights not adjusted are just lazy to do so, not that they don't know how.

Also, I still stick to my opinion. They're idiots, I'm just a dick.

[Adrian128]

Also, I still stick to my opinion. They're idiots, I'm just a dick.

In my book there's not a lot of difference between the 2. Actually, dicks are worse cause what they do is deliberate.. Idiots are just idiots, they can't help it. I'm glad you're proud to be a dick...karma's a bitch though... so watch out, dick.

[natnat]

some dicks are very successful you know..

Dick Smith ;p

[denot]

Cmon guys, back to the "CU2 Mods" topic. If you still want to continue the "dicks vs idiots" conversation, then please create a new topic on The Lounge.

[euRo_noob]

Cmon guys, back to the "CU2 Mods" topic. If you still want to continue the "dicks vs idiots" conversation, then please create a new topic on The Lounge.

He can't help it I suppose.

Has anyone tried bolting on some mufflers/exhaust systems that aren't Mugen or Fujitsubo? A guy fitted a CL9 Skunk2 exhaust on his CU2 but obviously it didn't fit perfectly so he had to cut and weld a lot of parts.. It ended up being over 1k anyways. Is that worth it? Skunk2.. Mugen/Fujitsubo?

[Fredoops]

Nope, just get a custom one in that case....

[MR_LATE]

He can't help it I suppose.

Has anyone tried bolting on some mufflers/exhaust systems that aren't Mugen or Fujitsubo? A guy fitted a CL9 Skunk2 exhaust on his CU2 but obviously it didn't fit perfectly so he had to cut and weld a lot of parts.. It ended up being over 1k anyways. Is that worth it? Skunk2.. Mugen/Fujitsubo?

yerp, fitted 2 super-cat 'sport' mufflers onto the euro and and and and and it was terrible, prob only loud exhaust sounds i can bear are supercar/v8/subaru but NA loud doesnt do it for me. had it removed and now their on ebay. it was a deeper sound but was draining at 80kms but then quite after 90kms.

@natnat > HAHAHAHA yeah well said

[euRo_noob]

Nope, just get a custom one in that case....

Ahh, fair enough.

yerp, fitted 2 super-cat 'sport' mufflers onto the euro and and and and and it was terrible, prob only loud exhaust sounds i can bear are supercar/v8/subaru but NA loud doesnt do it for me. had it removed and now their on ebay. it was a deeper sound but was draining at 80kms but then quite after 90kms.

@natnat > HAHAHAHA yeah well said

Oh is it :S Hmm... I won't know until I've been in a Euro with it or something.. So hard to tell what it sounds like lol. I guess I'll just continue with the cosmetics of the car first. So you're just back to the stock exhausts?

[MR_LATE]

yeah back to the stockies,, to be honest, after i had the exhausts on, it really confirmed what i want to do with my car. all is good.

oh and im getting tenzo-r cuzco in black 19'' 7-10 days woohoo!! there was charcoal but i dont know if it wud suit it so to b safe i went with black
http://www.fwt.net.au/products_close....5+Matte+Black

not from these guys, from bridgestone

[I CU2]

$$$$$$$$$$?

What you doing with stock rims?

[euRo_noob]

Ohh I see.. Guess I'll just wait and see.

Good choice on the rims too! Looks good