Did this today. Kinda screwed the eg center console up tough, shouldn't have cut the sides of. Just the middle section but o well it ain't noticable. Also put the EK arm rest in and it looks gangsta, made the top lip on the EK center console sit under the eg coin pocket where I cut for another anchorage point for EK one. And instead of ugly non stock screw holes, I used the plastic I cut, to make plastic " brackets that screwed into the stock EK screw holes and allowed me to cable tie it all down to the stock eg mounts. It really is stuck down well and looks good + no more loosing my coins and phone. Only complaint is the gap on each side up front but meh, nothing some silicone and vinyl can't fix. Might do an updated DIY on filling the gaps when I get more time