Which is faster? A stock FD Civic or a B18C2 EG?

[curtis265]

Serious thread is serious!
The Eg will be faster, and better around corners in the dry because its so light.
In the wet you would have more weight to the ground in the Fd so you wont wheel spin so much at take off and less likely to fall off the road around corners.

I think you're misunderstanding the concept of traction - more traction comes when a vehicle has more weight over the wheels - yes the FD able to put more power down, but that power is required to accelerate the car

maximum horizontal force = vertical weight distrbuted to the wheel x coefficient of traction x whatever other coefficients
if say, a vehicle weighs double, i thas twice as much traction.. but also needs twice as much force to move at the same rate as the lighter car

i hope that makes some sene

also note the engien specs: the stock FD comes with either
K20Z2
Found in:
2006- Acura CSX (Canada)
2006- Honda Civic (JDM)
2006- Honda Accord (Europe)
Displacement: 1,998 cc (121.9 cu in)
Compression: 9.6:1
Bore x Stroke: 86 mm x 86 mm
Power: 155 hp (114 kW) @ 6000 rpm (SAE net J1349 Rev 8/04)
Torque: 139 ft·lbf (188 N·m) @ 4500 rpm
Redline: 6800 rpm

or
R18A1
Found in:
2006+ Honda Civic (JDM FD1, American/Canadian-market FA1 and FG1)
Displacement: 1,799 cc (109.8 cu in)
Compression: 10.5:1
Bore & stroke: 81.0 × 87.3 mm (3.19 × 3.44 in)
Power: 140 PS (103 kW; 138 bhp) @ 6300 rpm (Japanese Spec)
Torque: 17.7 kgf·m (174 N·m (128 ft·lbf)) @ 4300 rpm
VTEC for economy 1500-3000rpm

they're not performance engines at all. The R18 civic weighs just under 1180 and the k20 civic weighs 1260... you do the maths on your egg


oh and wtf is a b18c2 lol . maybe that's why i thought this wasn't a serious question