-
The car would be considered 'legal' (sort of) if engineered however i wouldn't be able to legally drive it. So if i ram the back of a GTR i'm gone, insurance won't pay out. Decisions...!
-
New royal purple + Honda mtf today
-
Originally Posted by charliebrown
The car would be considered 'legal' (sort of) if engineered however i wouldn't be able to legally drive it. So if i ram the back of a GTR i'm gone, insurance won't pay out. Decisions...!
You can't legally drive an engineered car on your Ps?
Don't even consider it then.
-
Originally Posted by charliebrown
go for it man... check it out, dont be scared of defects, if u run a quiet muffler and u dont act like a ****wit 24/7 youll be fine! and 4 doors and it looks sleeper, you will fly under the radar.
-
lol ive seen this car in a workshop. it looks pretty clean
naturally i finished my set.
-
Originally Posted by Vvvtec
New royal purple + Honda mtf today
Did some mad dude help you out?
-
Fuarkk to jack my car up, gotta scissor jack the side to get the front high enough to slide trolley jack under. Then have to jack the rear up using scissor jacks while fronts lifted to be able to fit jack stands. Same thing backwards to take car down for both sides really need a lower jack that lifts higher, can barely fit my head under the damn car.
anyone got tips on how to change o2 sensor for the teg? i dont have a big enough wrench, toolset only goes up to 19mm. and its on hella tight + rust
-
drive onto some planks of wood.
use wd7 or whatever it is on the thread bit.
got a shifter thats big enough?
remember that brute force wont undo things, its shocking the thing that will undo it
some kids garage
A true car enthusiast appreciates the time, effort and money put into ANY sort of car, modified in ANY sort of style, whether they may like it or not.
-
Driving onto planks of wood only solves the firs tproblem, still doesn't jack high enough to allow jack stands to fit under. Maybe drive back wheels onto wood too?
Don't have a shifter, don't have 22mm open end wrench. Can't even brute force the lil shit, can only apply torque pretty much from my fingers, can't even use forearm
oh and also do i need to disconnect battery before i do this shit? i forgot today and unplugged the sensor oops
-
if u cant get it on stands to get under it properly to get enough leverage dont bother.
some kids garage
A true car enthusiast appreciates the time, effort and money put into ANY sort of car, modified in ANY sort of style, whether they may like it or not.
-
Originally Posted by charliebrown
Driving onto planks of wood only solves the firs tproblem, still doesn't jack high enough to allow jack stands to fit under. Maybe drive back wheels onto wood too?
Don't have a shifter, don't have 22mm open end wrench. Can't even brute force the lil shit, can only apply torque pretty much from my fingers, can't even use forearm
oh and also do i need to disconnect battery before i do this shit? i forgot today and unplugged the sensor oops
you wont have to disconnect the battery. just dont start the car without it to avoid making the cel come up. find yourself some leverage. if you cant get it off. it'l be 10bucks at an exhaust shop where they have a hoist to make life easier.
-
just do what I did and drop that whole part of the header out, go and get yourself the right size spanner from supercheap for like $8. Then step on the pipe, use your weight and TURN IT LIKE A MUTHAFKA.
wd40 also helps to release it.
-ZAMMIN-
"I know who you are, and I know if I make a formal complaint Mr. Benjamin will have to roll over and give me all your details" - Integra-GSi 19/11/2015
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks