Page 4 of 8 FirstFirst 1234567 ... LastLast
Results 37 to 48 of 89
  1. #37
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    lots off ppl show me the finger because my HID projectors that i fit light up a km of the road in low beam...

  2. #38
    Newcomer Array
    Join Date
    May 2010
    Location
    Melbourne
    first 1000k service is just a checkup on the car to see if everythings working and in tact. they dont actually do anything.

    that's what happened when i got mine serviced last month.

    i think i ran my engine in about 1k+ mileage before hitting it hard.

  3. #39
    So... technically i'm not supposed to take it over 2500Rpm? Mmm....may have gone over 3500 out of the dealership. Just used washed, used paint cleaner and waxed the Jazz. Ahhh......so happy.

  4. #40
    Newcomer Array
    Join Date
    Sep 2011
    Location
    Brisbane
    Car:
    Jazz VTI MY12 A
    [comment]So... technically i'm not supposed to take it over 2500Rpm?[/comment]

    No man, that's just me trying to protect it as much as I can.
    You can go faster if you want.

    So, how is it?

  5. #41
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    Quote Originally Posted by Liger View Post
    So... technically i'm not supposed to take it over 2500Rpm? Mmm....may have gone over 3500 out of the dealership. Just used washed, used paint cleaner and waxed the Jazz. Ahhh......so happy.
    Your not meant to let it rev hard, i would suggest try and keep it under 3000rpm for the first few hundred Km's or whatever honda recommends.
    also if you really want to take car of it, during those KM's its also best if u dont drive it whilst its cold give the car a minute or 2 to warm up

  6. #42
    So all is good in jazz world for me except 3 things.

    1. Removed those dealer licence plate plastic cover things, I'm worried that the licence plate will scratch the surrounding paint. Am I just being paranoid?
    2. The external thermometer does not display on my dash. How do i get it working?
    3. I got the floor mats for the jazz but they come with 2 clips to attach the drivers side mat, where/how do I attach the clips?

  7. #43
    Newcomer Array
    Join Date
    May 2010
    Location
    Melbourne
    ^

    i also do not know how to get the thermo working? is it in the manual?

    about the carpets, same thing here, they didnt have clips on my drivers side either..annoying at first but got used to it

  8. #44
    which mats are you guys talking abt?

  9. #45
    Yea but mostly about how to manually adjust the temp.

  10. #46
    The floor mats you can buy from the dealer.

  11. #47
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    what type of clips? i remember the Driver sidde mats always slipped when u were driving and eventually it crawls away from you, on the GD3 the clip is like a bracket that attaches to where the seat bolts to the floor and then it stabs through 2 holes that are already in the mate, i would guess the clips bolt onto a simular thing.

    so check around the Chair bracket bolts

  12. #48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.