cu2 mods

[MR_LATE]

The master

[euRo_noob]

19x8.5 ET +35 fits fine with 245/35/19 as long as you dont lower yr car too much.
19x9.5 ET +35 will need guard rolling and camber at around -3.0 t0 -3.5 egrees to fit.

235/40/19 will do the trick for the 9.5.

19x9.5 ET+22 will need full flat guard roll + PULL. without these, u will not get those wheels to clear your guards unless u are on stock height and dont go over bumps too quickly

Roughly how much negative camber would I need to run? And the 9.5 +22 is only for the rears, not fronts.

[yungquan]

Roughly how much negative camber would I need to run? And the 9.5 +22 is only for the rears, not fronts.

ALOT!

i know its for the rear. impossible for front anyways.

im guessing -3.5 to -4 deg. depending on how stretched your tyres are.
Then again, there are no tyres narrower than 245mm in 19inch that will satisfy the load rating of stock tyres.

235/35 is in the region of 87Y XL <----- XL = extra load, should be around 650kg/tyre
225/35 well......85W maybe? no idea

your call on using under rated load ratings. if a tyre blows under heavy cornering/potholes, 1st thing to go off will be your wheels, and followed by possibly hubs. and your fuel tank sits just around the rear axle. it will bottom out and rupture

[MR_LATE]

sex specs = grandma driving x 2

[yungquan]

sex specs = grandma driving x 2

lol

[euRo_noob]

Ahh I see, cheers Yung. Will I need a camber kit? 1 arm? 3 arm? Toe arm?

[yungquan]

Ahh I see, cheers Yung. Will I need a camber kit? 1 arm? 3 arm? Toe arm?

if you are correcting anything more than (+) or (-) 1 degree, you will need all 3 arms or at least the Toe arm + Camber Arm to get the setup right. Remember: incorrect Toe settings will wear off your tyres way quicker than camber

[MR_LATE]

got these on today.. feels so high now that its 18" LOL

and thinking of getting these.
http://www.cquence.net/acura-2009-fr...s-p-30034.html been looking at reviews and alot of people who dont have them say stay away and people with them, loves them and their pricing :S

[yungquan]

got these on today.. feels so high now that its 18" LOL

and thinking of getting these.
http://www.cquence.net/acura-2009-fr...s-p-30034.html been looking at reviews and alot of people who dont have them say stay away and people with them, loves them and their pricing :S

did you paint your caliper gold???
DAMN!!! I LIKE!

[MR_LATE]

did you paint your caliper gold???
DAMN!!! I LIKE!

=.= http://www.ozhonda.com/forum/showthr...2-mods/page144 scroll down

yesh i did and thank you lol . gold caliper paint form autobarn and clear coat too. use a whole can for all four id recommend.

[euRo_noob]

o_o you brake disc is so clean.... and yes, I'm liking the gold calipers!!

[ekdez]

Hi, as you may be aware, im selling two sets of wheels.. and a guy with a cu2 has approached me..

will either of these fit your car with or without coilovers.. or what is required to fit them.

19x8.5 F +25 'O-Disk' and 19x9.5 R +30 'O-Disk'
20x8.5 F +35 'A-Disk' and 20x9.5 R +35 'O-Disk'

Please let me know! thanks