Results 1 to 10 of 10
  1. #1
    Newcomer Array
    Join Date
    Sep 2011
    Car:
    Integra Type R

    Removing Front Badge?

    Hey guys, I was wondering if anyone has tips or instructions to remove the front badge and make it clean like the picture i have attached.

    When you remove the badge there are two holes, what kind of mould do you recommend and how to go about touching it up with paint.

    Thanks

  2. #2
    Member Array
    Join Date
    Mar 2011
    Location
    Moosemans
    Car:
    Dc2
    WD40 and dental floss, or Hot water and dental floss works well. Just run it through all four corners and u should be able to remove it easily.

    http://www.youtube.com/watch?v=uMRSPJuHW_8

    I dont see a picture attached? 0.o

    As for the holes maybe go to a hardware store and find some plugs that fit and just touch up? or can be professionally done by remoulding and paint over.

  3. #3
    Member Array
    Join Date
    Nov 2011
    Location
    NSW
    Car:
    DC2 Integra
    The badge was easy to remove, i did it and it just left some residue, just used either petrol or some good cleaning product that won't ruin your paint. Be careful when you take your badge off, take ur time and don't rip it off.

    i left my holes cause im lazy lol

  4. #4
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    Eucalyptus oil for sticky residue, then just get it filled and painted IMO.

  5. #5
    Member Array
    Join Date
    Mar 2011
    Location
    prison cell
    Car:
    DA9/CL9
    Quote Originally Posted by Evok View Post

    i left my holes cause im lazy lol
    same lol , will be watching this thread for easy ways to fill the holes so it looks slick n clean........

  6. #6
    Member Array
    Join Date
    Jan 2010
    Location
    ACT
    Car:
    DC2
    soak in wax and grease remover, also use heat gun. this will make it much easier to remove, and the W&G remover will make the leftover residue easier to remove also.
    -ZAMMIN-

    "I know who you are, and I know if I make a formal complaint Mr. Benjamin will have to roll over and give me all your details"
    - Integra-GSi 19/11/2015

  7. #7
    Member Array
    Join Date
    May 2011
    Location
    Sydenham, VIC
    Car:
    DC2/180sx
    My badge fell off during the xmas hail storm and dinted the whole car..
    I went to the car when the hail stoped to see the damage and noticed the badge was on the floor???

  8. #8
    Member Array
    Join Date
    Mar 2009
    Location
    Tokyo/Melb
    Car:
    vtec powered
    Use a thin cable tie, always works.
    Quote Originally Posted by IcedCoffee View Post
    Hey guys, I was wondering if anyone has tips or instructions to remove the front badge and make it clean like the picture i have attached.

    When you remove the badge there are two holes, what kind of mould do you recommend and how to go about touching it up with paint.

    Thanks
    Tokyo Life

  9. #9
    Use Wd40 or Johnson Baby oil.

  10. #10
    Member Array
    Join Date
    May 2010
    Car:
    civic
    Quote Originally Posted by DA9-47 View Post
    same lol , will be watching this thread for easy ways to fill the holes so it looks slick n clean........
    haha easy to be lazy lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.