***Official What did you do to your EK today***

[justinchee]

Did the DIY on the tail lites.. Very much thanks to a friend!

[EKVTIR-T]

looks good dude

that ek9 style

[kyzz]

Was so excited when I did my ek9 lights DIY, now Im like wtf why doesn't this civic have 2 brake lights if I ever see one

[justinchee]

thanks.. EKVTIR-T

[Chriskoss]

[QUOTE=Aleksa;3232373]Installed asr sub frame and ek9 rear sway bar... then realized my back tires were worn like crazy...

where'd you get the ek9 sway bar and how much.. if you dont mind me asking <3

[CivicRacer13]

installed OEM EM1 rear sway bar on my ek1

[90LAN]

[QUOTE=Chriskoss;3233755]

Installed asr sub frame and ek9 rear sway bar... then realized my back tires were worn like crazy...

where'd you get the ek9 sway bar and how much.. if you dont mind me asking <3

he got it from me $250 complete

[viinnh]

installed OEM EM1 rear sway bar on my ek1

how many mm is this ?

is this safe with out a subframe like asr and shit on a EK1 ?
i heard ek1 dont got as strong welds as a ek4 and ek 4 and em1 = VTIR

also notice and difference ?

[90LAN]

14mm i believe

[CivicRacer13]

how many mm is this ?

is this safe with out a subframe like asr and shit on a EK1 ?
i heard ek1 dont got as strong welds as a ek4 and ek 4 and em1 = VTIR

also notice and difference ?

im pretty sure its safe lol i think its only like a 15mm or 14mm no bigger then that but i heard its alright to run on an ek1 without any dramas but anything bigger then you would need to get a sub frame reinforcement brace eg,asr etc

i went for a good road test today and it seems fine the handling difference is amazing even for a stock bar,before i put the rear on i was only running a GLi 22mm front sway bar and that help heaps cause my car is a cxi= came with no front or rear swaybars lol and with the rear now it sits pretty flat in corners and takes them pretty good compare to having just a front sway bar.60 bucks well spend for the lot xD

[90LAN]

and one for alvis
some new wheels

[IV73CI]

how many mm is this ?

is this safe with out a subframe like asr and shit on a EK1 ?
i heard ek1 dont got as strong welds as a ek4 and ek 4 and em1 = VTIR

also notice and difference ?

Oem is 16mm.. Thin as chips..

Thats y i upgraded to cusco 25mm rears matching asr and hardrace end links..