[CL9] Low offset wheels

[ricerockets]

fronts:


rears:


about there lol, cant find any recent side on shots...

[Fredoops]

^^^ is it just me or the rims seems to be making out with the kerb a lot

[jzx_andy]

soo.... yall reckon 17x8 +30 is gonna fit alright wihtout any fender work?
lol them evo 8 enkei's been eyeing at me for a while.



else I mightta save on getting a set of Sparco Assetto Gara's in bronze (17x7.5 +45) from the states lol....

fronts you'll be able to get away with just tucking the lining and going with 215's.. 225's: you'd probably be safe not going below 1 finger gap, and being a little careful with big dips on the road haha..

not too sure about rears but the info should be in this thread!

[Fredoops]

fronts you'll be able to get away with just tucking the lining and going with 215's.. 225's: you'd probably be safe not going below 1 finger gap, and being a little careful with big dips on the road haha..

not too sure about rears but the info should be in this thread!

Fk it, Sparco/Oz racing here I come.... Lol

I'm
Already getting clunks and scrapes on stock height lols. Damn cusco

[MWAKU]

im running 17x8 +28. and u definitely need ur gaurds rolled on all four corners. running 225s

[Fredoops]

im running 17x8 +28. and u definitely need ur gaurds rolled on all four corners. running 225s

Considering how often they get it wrong when rolling guards..... Fk it I'm going the easy option

[longers]

if you contact DT Panels. the dude that does it for them hardly ever gets it wrong. assuming you're talking about the guard rolling that is

[Rein]

My new set

19x9.5 Front and 19x10 Rear.

Offset? Secret =)

[jzx_andy]

My new set

19x9.5 Front and 19x10 Rear.

Offset? Secret =)

guessing around -20 for the rears :P

[Rein]

^ haha nah man... but it will be flush when aired out with nice camber.

[3RotaRX]

What do you guys think of 18x8.5-9.5 +35 offset BBS LM?
Will be cambered
Guards haven't been rolled

[MWAKU]

100% need guard rolled.