Page 1113 of 1751 FirstFirst ... 11361310131063110311101111111211131114111511161123116312131613 ... LastLast
Results 13,345 to 13,356 of 21004
  1. #13345
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    needs lows and lips. looks even higher cos you have non stock rims.
    S P A M | W O R K S
    hehe.
    PHC


  2. #13346
    well today i went to get a quote to fix my side mirror part is about $75 for whole unpainted housing unpainted and honda service charging $132 for labour cost....seems a bit expensive just to change a side mirror...does any one know where else is a good place around liverpool area to get my side mirror change that dont cost too much?

  3. #13347
    Member Array
    Join Date
    Oct 2011
    Location
    Hills
    Car:
    FD2
    anyone going meet today?
    StanceSlutz

  4. #13348
    while i driving home from work i saw this white fd with type r body i think? that was speeding down hume highway heading towards lansvale around 3:00am today?is that anyone from here?

  5. #13349
    Member Array
    Join Date
    May 2011
    Location
    Sydney
    Car:
    FD1
    Quote Originally Posted by FDHarry View Post
    while i driving home from work i saw this white fd with type r body i think? that was speeding down hume highway heading towards lansvale around 3:00am today?is that anyone from here?
    If it was a white Type R it probably is one, always see him going from Liverpool towards landsvale

  6. #13350
    Member Array
    Join Date
    Aug 2010
    Location
    Liverpool
    Car:
    Civic
    Quote Originally Posted by FDHarry View Post
    well today i went to get a quote to fix my side mirror part is about $75 for whole unpainted housing unpainted and honda service charging $132 for labour cost....seems a bit expensive just to change a side mirror...does any one know where else is a good place around liverpool area to get my side mirror change that dont cost too much?
    DIY, lols.
    its only a few screws,

  7. #13351
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    100% diy.
    S P A M | W O R K S
    hehe.
    PHC


  8. #13352
    Just installed tein s tech, took 12 hours in 2 days. haha.

  9. #13353
    Member Array
    Join Date
    Feb 2011
    Location
    Moore Park - Sydney
    Car:
    FD1-RR 2.7
    Well done Randy it feels good doesn't it !

    now tell me you installed the top hats correctly ...Lol

  10. #13354
    oh yeah, there's a small bearings ball at the top hats isn't? good thing when i removed the shocks I pull it slowly otherwise I wouldnt find those bearing. hahaha.

  11. #13355
    Member Array
    Join Date
    Feb 2011
    Location
    Moore Park - Sydney
    Car:
    FD1-RR 2.7
    Nah I'm talking bout the little triangle mark on top of the hat, the triangle should point at the motor ! but yeah if you had ball bearings popping out sounds like you had fun ! I've done my struts/shocks 3 times cause I stuffed up the first time, then I had knocking sound from one, so pulled em apart again and found I had stuffed the top hat. Third time swapped Eibach springs onto some new Tokico. Can do a strut spring change in about 30mins now !!! Lol

  12. #13356
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    Stevil, can you please elaborate on the knocking sound you had when the strut wasn't triangled in?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.