Page 1124 of 1384 FirstFirst ... 1246241024107411141121112211231124112511261127113411741224 ... LastLast
Results 13,477 to 13,488 of 16607

Thread: EP3 Type R

  1. #13477
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    Quote Originally Posted by JDM EP3 View Post
    The gruppem is crazy awesome well worth it IMO
    I guess it depends on your definition of 'well worth it'.

    If I get a better power gain from an Injen + RBC + $400 on god knows what, is it still worth it? Worth is like beauty I guess, its in the eye of the beholder.

    I think I'm just old school, function over form and all that. No doubt at all, the Gruppe M looks fantastic, and there is no way in the world anyone who has forked out $1000 + for an intake is going to say bad things about it, why would you after forking out your hard earned? I figure if the Injen provides 33% of the power increase of a Gruppe M, then I'm on par . . . any more is a bonus . . . a very very cheap bonus.

    Stay tuned, we will see shortly I'm sure.

  2. #13478
    guiz

    its pretty much proven that any intake is basically the same 2-3kw top end gain bottom end loss and a bunch of noise. I got the gruppe m with my ep3 - sounded very nice from the outside but i wouldnt pay that much for it !

  3. #13479
    Member Array
    Join Date
    May 2010
    Location
    Melbourne, West
    Car:
    EP3
    Quote Originally Posted by bennjamin View Post
    guiz

    its pretty much proven that any intake is basically the same 2-3kw top end gain bottom end loss and a bunch of noise. I got the gruppe m with my ep3 - sounded very nice from the outside but i wouldnt pay that much for it !
    +1

    Exactly my thoughts on it. If it were my cash I was paying with, I'd buy an Injen CAI.

  4. #13480
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    Quote Originally Posted by bennjamin View Post
    guiz

    its pretty much proven that any intake is basically the same 2-3kw top end gain bottom end loss and a bunch of noise. I got the gruppe m with my ep3 - sounded very nice from the outside but i wouldnt pay that much for it !
    Just as proven as the EP3 chassis being different to the EP3 Si chassis and looking at Acura RSX injen CAI for EP3 irrespective of the fact that there is no chance at all of it fitting?

    Struggling man, Struggling.

  5. #13481
    Member Array
    Join Date
    Jan 2012
    Location
    Japan
    Car:
    EP3 CTR
    Quote Originally Posted by -JC- View Post
    I guess it depends on your definition of 'well worth it'.

    If I get a better power gain from an Injen + RBC + $400 on god knows what, is it still worth it? Worth is like beauty I guess, its in the eye of the beholder.

    I think I'm just old school, function over form and all that. No doubt at all, the Gruppe M looks fantastic, and there is no way in the world anyone who has forked out $1000 + for an intake is going to say bad things about it, why would you after forking out your hard earned? I figure if the Injen provides 33% of the power increase of a Gruppe M, then I'm on par . . . any more is a bonus . . . a very very cheap bonus.

    Stay tuned, we will see shortly I'm sure.
    Yeah all that you say can be taken into consideration, although givem that a gruppem gets more proven power its makes more sense to get the most gains out of the engine. If i was to also add a rbc to that and have the gruppem it will probably get more power compared to a injen and rbc. Yes your option is bang for buck in that sense but this is na where you want every last hp you can squeeze out of the engine.
    AKA: The Spaniard! +1 Rep me if you find my posts useful.

  6. #13482
    Quote Originally Posted by -JC- View Post
    Just as proven as the EP3 chassis being different to the EP3 Si chassis and looking at Acura RSX injen CAI for EP3 irrespective of the fact that there is no chance at all of it fitting?

    Struggling man, Struggling.
    I would look at a RSX intake - its almost the same chassis and engine dimensions

    Civic Si is a different chassis - does anyone know if the engine bay is similar / same ?
    You stated "civic Si" which is two different chassis with k series motors spanning some 10 years in the US - how was anyone to know (at the time) what you meant and that you would bring it up later on stating "No...i meant EP3 so i doubt your overall knowledge of anything". Relax.
    Last edited by bennjamin; 09-08-2012 at 09:03 PM.

  7. #13483

  8. #13484
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    'proven power?' dude, all you need to do now is prove it! I've got $150 that says a stock ep3 with moneybags intake won't go faster than el cheapo injen intake? Any takers?

  9. #13485
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    On second thought, this is probably a mis-understanding more than anything else.

    I probably should have just relaxed.

    Carry on.
    Last edited by -JC-; 10-08-2012 at 06:43 AM.

  10. #13486
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    man being a p plater sucks lol. 4 points ftl
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  11. #13487
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by -JC- View Post
    'proven power?' dude, all you need to do now is prove it! I've got $150 that says a stock ep3 with moneybags intake won't go faster than el cheapo injen intake? Any takers?
    Correct

    free air is free air no matter how you free it up
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  12. #13488
    Member Array
    Join Date
    Feb 2012
    Location
    Wollongong
    Car:
    EP3 Type R
    Isn't the Gruppe M the only intake that doesn't screw up your Vtec change-over point? Not sure where I read that??

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.