If you are using the 'test pipe' it comes with your secondary 02 sensor wire is going to be short. Make sure you extend the connector side not the sensor side as you will cause false readings if you cut the sensor wires as it will change the impedance.
If you are using the 'test pipe' it comes with your secondary 02 sensor wire is going to be short. Make sure you extend the connector side not the sensor side as you will cause false readings if you cut the sensor wires as it will change the impedance.
Actually....
I installed my plm headers with test pipe and had no need to extend any sensor cables at all. Guess i got lucky?
AKA: The Spaniard! +1 Rep me if you find my posts useful.
Ah awesome. Thanks guys. And yeh just with the test pipe hey.. I cbf with messing around with a cat atm. How long did it take to fit?
It took me roughly 4-5 hours to install headers and exhaust system.
Biggest issue I had was with all the header bolts on the engine being hard as hell to get off and the heat shield and header bolts being rusted out and easy to round.
AKA: The Spaniard! +1 Rep me if you find my posts useful.
Haha nice. How much for the install if you don't mind me asking?
Also, anyone running spoon calipers mind telling me what wheel size your running. Looking to getting some new wheels but want to make sure a have room if/when I decide to do the upgrade. Without using spacers.
Haha nice. How much for the install if you don't mind me asking?
Also, anyone running spoon calipers mind telling me what wheel size your running. Looking to getting some new wheels but want to make sure a have room if/when I decide to do the upgrade. Without using spacers.
Originally Posted by UNA91
Reply With Quote
Bookmarks