EP3 Type R

[bluey45]

Just picked these up and exhaust should be arriving early next week and have booked in haks for Monday 10th to get everything done.

That's some nice PLM headers there. How much did they set you back?

[doosra]

I bought them off jdmyard. They normally sell them for $660, but I got it for $550, because there was a slight manufacturer fault. Basically the bolt bracket down the bottom part of the headers don't line up, so it will likely have to be repositioned by Haks but shouldn't cost too much to do so.

If anyone is interested in cost to install from Hak's
-Flange: $50
-Defouler: $70
-100 cel high flow cat: $450
-Header Install: $165

-Catback install: $50

Can't wait to have it all installed. Will have the complete I/H/E afterwards

[Lukezen27]

That's some nice PLM headers there. How much did they set you back?

They look like my Kidd Racer header

[bluey45]

I bought them off jdmyard. They normally sell them for $660, but I got it for $550, because there was a slight manufacturer fault. Basically the bolt bracket down the bottom part of the headers don't line up, so it will likely have to be repositioned by Haks but shouldn't cost too much to do so.

If anyone is interested in cost to install from Hak's
-Flange: $50
-Defouler: $70
-100 cel high flow cat: $450
-Header Install: $165

-Catback install: $50

Can't wait to have it all installed. Will have the complete I/H/E afterwards

Awesome. Thanks for the info. I'm looking to get the same headers too, but just saving up for it.
Did you just call haks up to arrange a booking for install? Let us know how it goes
You just need a kpro and tune now lol.

[doosra]

yeap, I called and spoke to Arthur who then got the prices from Haks. This will be the LAST mod !!..

Kpro and tune will cost another 2k.. and I really don't want to spend anymore as I've just spent abit over 2k on headers and intake...

[Icebox]

yeap, I called and spoke to Arthur who then got the prices from Haks. This will be the LAST mod !!..

Kpro and tune will cost another 2k.. and I really don't want to spend anymore as I've just spent abit over 2k on headers and intake...

yeah i know what you mean

ive decided to go for a Toda Set up instead of PLM and from what i can make it of it

toda manifold + toda exhaust + kpro + tune = 4.3k =[

[butterfingers]

do you guys know the difference between the 2 seibon mugen style wings?

http://seiboncarbon.com.au/products/...ic-si-jdm.html

and

http://seiboncarbon.com.au/products/...-civic-si.html

one is jdm one isnt. can anyone confirm what is the actual difference? thanks

[doosra]

wow, my Tegiwa exhaust is already delivered to my door. I placed the order on the 27th November and it's arrived so quickly... woot.. now the anxious wait to have it installed. I'm tempted to go to another exhaust shop, but Hak's seems to have a good rep so I'll wait.

[Symphorced]

yeah i know what you mean

ive decided to go for a Toda Set up instead of PLM and from what i can make it of it

toda manifold + toda exhaust + kpro + tune = 4.3k =[

Cheaper than what I paid.

Toda headers/High flow cat/Toda catback = $3.2k
Kpro + tune = $2k

[Perry]

Cheaper than what I paid.

Toda headers/High flow cat/Toda catback = $3.2k
Kpro + tune = $2k

I would prefer a toda gear.

[bluey45]

yeah i know what you mean

ive decided to go for a Toda Set up instead of PLM and from what i can make it of it

toda manifold + toda exhaust + kpro + tune = 4.3k =[

Far out.

That is a eye popping amount you got to spend. Sounds like serious saving to get this in one hit?
I'm still deciding whether to get headers or not lol. Cause if I do then I need kpro and tune later. Sigh.

[doosra]

Yeap, cars are a money pit. If I was single and didn't have a mortgage, I'd probably spend all my money on car stuff ahah