Quote Originally Posted by FenrirWC View Post
When checking the tappets the valve clearances should be Intake: 0.17mm +-0.02mm and Exhaust 0.19mm +-0.02mm correct? and the reading should be taken from the mid rocker arm?

havent been able to source a rocker cover or sump gasket yet.
The valve clearance is measured between the cam lobe and rocker arm for each valve. This does not include the VTEC (middle) rocker arm. Each valve must be checked with that cylinder a TDC, so make sure to follow the correct firing order (1,3,4,2).

For intake you would probably want around 0.006"-0.007", and 0.007"-0.008" for exhaust.