Page 3 of 3 FirstFirst 123
Results 25 to 33 of 33
  1. #25
    What do you type in? I must be that retarded, I try to type keywords like accord euro, CL9, lip kit, modulo etc. but barely anything comes up.
    K&N Typhoon CAI || Weapon-R Headers + High Flow CAT || APEX'i WS2 catback || Ralco RZ Pulleys || Progress RSB || Alutec FTB || Tein Street Basis || Enkei Lusso 18" x 8" +40
    REFLASHED AUDM ECU

  2. #26
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Accord euro wreck.


    Then I go thru the pics one by one
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  3. #27
    Member Array
    Join Date
    Mar 2013
    Car:
    Accord Euro 06
    EUROR, you can get off yahoo auctions if your lucky !

  4. #28
    Ok so just in case anyone wants to compare prices in the future, I have contacted three local authorised Honda dealers here and these are the prices:

    1. $1844 unpainted for the whole Modulo lip kit. +$1000 for paint and installation
    2. Apparently Honda don't make the Modulo lip kit for the 7th gen Honda Accord Euro anymore :/
    3. $1863 painted for the whole Modulo lip kit + $400 installation.
    Last edited by axispower; 21-10-2013 at 07:08 PM.
    K&N Typhoon CAI || Weapon-R Headers + High Flow CAT || APEX'i WS2 catback || Ralco RZ Pulleys || Progress RSB || Alutec FTB || Tein Street Basis || Enkei Lusso 18" x 8" +40
    REFLASHED AUDM ECU

  5. #29
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    ^^ there's people selling replica mugen kits for less than 700 new
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  6. #30
    Quote Originally Posted by Fredoops View Post
    ^^ there's people selling replica mugen kits for less than 700 new
    Don't like the Mugen. I like the Mugen rear but thats about it.
    K&N Typhoon CAI || Weapon-R Headers + High Flow CAT || APEX'i WS2 catback || Ralco RZ Pulleys || Progress RSB || Alutec FTB || Tein Street Basis || Enkei Lusso 18" x 8" +40
    REFLASHED AUDM ECU

  7. #31
    If you have the part number, email import monster guys and ask them for prive from honda japan+shipping.

    Suzuki is about 3 times more expensive in aus than japan... honda might be too.

  8. #32
    Quote Originally Posted by axispower View Post
    Ok so just in case anyone wants to compare prices in the future, I have contacted three local authorised Honda dealers here and these are the prices:

    1. $1844 unpainted for the whole Modulo lip kit.
    2. Apparently Honda don't make the Modulo lip kit for the 7th gen Honda Accord Euro anymore :/
    3. $1863 painted for the whole Modulo lip kit + $400 installation.

    That option 3 doesn't seem that bad. Painted and installed by Honda abit a tad expensive you paying for quality (?).
    So bout $1300 for kit and $1000 for paint and install. Give or take.

    I am also trying to get my lip kit done but still can't decide on kit and don't have time to find a good painter and installer.
    Any recommendation for painter/installer around Chester Hill, Sydney area?

    Also for reference I got a quote for modulo full kit at Peter Warren Warwick Honda for $1536 unpainted.

  9. #33
    Quote Originally Posted by noobies View Post
    That option 3 doesn't seem that bad. Painted and installed by Honda abit a tad expensive you paying for quality (?).
    So bout $1300 for kit and $1000 for paint and install. Give or take.

    I am also trying to get my lip kit done but still can't decide on kit and don't have time to find a good painter and installer.
    Any recommendation for painter/installer around Chester Hill, Sydney area?

    Also for reference I got a quote for modulo full kit at Peter Warren Warwick Honda for $1536 unpainted.
    Yeah I'm thinking about doing the third option, I cbf looking through all the wrecks and I haven't found anything looking through them anyway. The third option was from a Honda dealer in the ACT that I had my auntie call earlier today while I was at work because she has a friend that works there. This one comes in Satin Silver (my colour) for that price + price for installation.

    Pain in the ass how they come unpainted for that kind of money. I don't know any reputable painters or bodywork shops anywhere in Sydney, sorry. I usually get my mechanic here in the ACT who is a family friend to help me out with that kind of thing.
    Last edited by axispower; 24-10-2013 at 08:33 AM.
    K&N Typhoon CAI || Weapon-R Headers + High Flow CAT || APEX'i WS2 catback || Ralco RZ Pulleys || Progress RSB || Alutec FTB || Tein Street Basis || Enkei Lusso 18" x 8" +40
    REFLASHED AUDM ECU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.