Alex's B20VTEC DC2

**MassiEk4** · 05-12-2013 06:14 PM

Originally Posted by ivseenwars

managed to get to the tensioner bolt, got upto the intake manifold but i cant get to the lower bolts? any ideas?

From memory there are 2 12mm bolts that hold the manifold the a steel bracket which bolts to the block, to get to the bolts to "free" the mani, so you can take it off in one piece with the head, you have to undo them from underneath the car with a long extension.

Check this out and go to step 16.
http://technet.ff-squad.com/how-to/sk2im/

**ivseenwars** · 05-12-2013 06:35 PM

Originally Posted by MassiEk4

From memory there are 2 12mm bolts that hold the manifold the a steel bracket which bolts to the block, to get to the bolts to "free" the mani, so you can take it off in one piece with the head, you have to undo them from underneath the car with a long extension.

Check this out and go to step 16.
http://technet.ff-squad.com/how-to/sk2im/

I got the head off already but thanks

Spose I should update.

Got the head off:

and sent it off to Redline Engine Service to have it machined and to have 10thou (.25mm) taken off.
also ordered my conversion kit.