Brake mounting differences

[Genghis]

Hi gang, does anyone know if the mounting holes for the 4 stud 262mm Integra Type R front brakes and the 5 stud 282mm callipers are in the same place? (meaning are the mounting holes the same distance apart).

Cheers

Genghis

[dorikin]

Yes the caliper mounting hole distance is the same on both knuckles (DC2 & DC2R)... it's a common upgrade

If you're upgrading, you'll have to machine off 3mm from the Type-R caliper bracket to get it center on the rotor

[Genghis]

Yes the caliper mounting hole distance is the same on both knuckles (DC2 & DC2R)... it's a common upgrade

If you're upgrading, you'll have to machine off 3mm from the Type-R caliper bracket to get it center on the rotor

Thanks Dorikin. It is a production race car and the original owner put CRX callipers on it so it is already running 282mm rotors (on 15s). What I am looking at is putting a set of original late model DC2 R callipers back on it so I can run some Brembo HP2000 pads on it. It's a bit of a marketing exercise because these pads are actually road homologated pads but they perform better than the Ferodo race pads that I currently run and have been very successful with.


Cheers

Genghis