Hi guys recently changed my cluster dials but now for some reason my fuel gauge will not read. The pin drops way past E and even when I drive around for a while it doesn't detect a thing. I had a spare one from a working cluster and swapped that in and it still didn't work. So far I made sure that all the connections are plugged and that the screws are in nicely. I even tried position the needle to where the last fuel reading was but it just drops down all the way. Help greatly appreciated! Thanks
*EDIT - I thought I could fix it but turns out my speedometer is off about roughly 10 km/h too high (used a gps to get an estimate). So I'd be doing 60km/h when it actually reads 70km/h. I tried putting the needle in when the car was on idle so that it started off that 0 km/h but still reads 10 higher. My revs seem to be about right tho
Bookmarks