Honda Beat PP1 discussion thread

[Beat]

Do you have any pictures of the rear brakes?

Just a few other question
S2000 rear calipers?
Civic fd1 rear caliper mount?

Cheers

See the photos here as well

http://hondabeat.com.au/Brakes/


I installed the yellow stuff rear pads and Jazz 240mm front brakes the other day, all working well.


The mounts are from the rear of a 2006 FD civic, others may be the same but I haven't found any. The bolt spacing is 98mm to the car, 110mm to the caliper and 57mm between these.

The calipers are from an S2000, I believe all year models have the same caliper 13CLP15S. Everything bolts up no modification, the only difference is the hand brake cable end is different so replace the 6mm pin with a 5mm stainless steel one.

The pads I used are EBC YellowStuff DP41193R

The rotors are DBA2502 260mm diameter, 48mm high, 61mm centre hole, 4x100pcd, solid.