Modifying my Stock ECU P28 to not look for VTS-VTEC Spool Solenoid??

[ProECU]

Hm

OK

e-mange has Purple (VTM Putput) I think is ""input"" and its a misprint..

Yellow (VTEC Output)
Light Blue (TEC Input)

So witch ones are the ones I should be bridging ProECU?

Thanks man

Luke

seems like Putput is actually output (the O key is next to P)
what is VTM? If its vtec pressure then connect this wire to the VTP of the ECU. You will need to sever the engine side of the wire (leave it loose) and connect the VTM to the ECU side of VTP.

Failing that - splice yellow & connect to VTP in the same fashion just described.