Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

Hi guys, this is my first DIY thread, hope it's useful to you!

Items required: Degreaser, Primer, Spray paint of your colour choice, masking tape, brush and a deck of playing cards!
(Tip: Primer and spray paint should be of the same brand and brand new playing cards!)



Initial Product


Step 1: Spray degreaser onto wheel


Step 2: Scrub wheel with brush to remove dirt and grime; hose clean


Step 3: Wipe excess water off wheel and allow to dry


Step 4: Insert playing cards upright into gap between wheel and tyre
(Tip: Make sure playing cards overlap each other and that no gaps are present!)


This is what it should look like after you have gone round the entire wheel


Step 5: Tape up valve with masking tape and remove centre cap if you do not want it painted


Step 6: Apply primer onto wheel (Follow instructions on can)


Allow to dry


Step 7: Apply desired colour onto wheel (Follow instructions on can)
(Tip: Work from edge of wheel to the centre!)


Allow to dry


Step 8: Remove playing cards and masking tape from wheel and valve


Finished Product


Try this yourself, it's really quick and simple. No more time wasted to tape up wheels with newspapers!