Quote Originally Posted by Honda View Post
I tried running the power cable but it gets jammed (it keeps going to the right and not directly down arrrgh!). I lift the black thing and reach as fast as I could, and unable to find the power cable. Where about it is? I cant point point the position.
zip tie wire onto a straightened coat hanger then jam that down
The fender was annoying, had to take out bumper, MUD GUARDS, headlights just to get a good access to that plug! Even then, I was unable to completely take off the fender as it was stuck somewhere at the bottom of the side skirt. No idea where.
thats why i pulled the door pins, easier imo
Now the drilling part is what I'm afraid of. What if i drill a wire.. is your ek gli or cxi?
I perfer to have power windows + central locking than a sound system so yeah.. I don't want to tamper into something that is working perfectly fine.
gli. as i explained before if you pull the plug out you can see where the wires are then drill where there are no wires, easy as.
I just feel like running it through the door and under the door trim (its bad i know ) or even use the factory wire. Will there be any difference if I use factory wire? Considering my system is quite low end anyways.

I'm getting frustrated lol
I always run new higher gauge cables on every install but if you want to take the easy path then reusing the stock wiring will work.