bennjamin,
Our current EG/DC two piece bracket kit is also a direct replacement for the original brackets, with all mounting points and swaybar pivots points being the same as for the original brackets and swaybar.
On the EG/DC model, the swaybar pivot points are directly above the control arm bolt, so there is no torque being generated from the D-bush onto the control arm bolt which would try to rotate the bracket. So, the bottom line is that in my view a single piece bracket is not as critical on the EG/DC chassis as it is on the EK, and I am not personnally aware of any failuires with our EG/DC kits. But, we will be very happy to discuss and consider it.

ccibai,
KSB709 is a control arm/chassis bracket brace. It was designed as an additional component for our now no-longer-available previous two piece brackets. It will not fit and more to the point it is not required with our new single piece bracket kit.

Cheers,
Wojtek.