DVD Player in my Euro?

[Eurtopia]

Hey where can i get those facials... from australia... also how much do they cost?

Best Kits Honda Euro Facia Dash Kit 03-04

http://www.ryda.com.au/Best-Kits-Hon...bkhonk823h.htm
These should cost around $60 from JB Hi-Fi


Aerpro Accord Euro Full Dash Facia Kit

http://www.ryda.com.au/Aerpro-Accord...p/fp997864.htm
I have seen these around for $200, but sorry i don't remember where. Also I don't like it because you will lose your dual temp control.

[johnprocter]

for the Best Kits Honda Euro Facia Dash Kit 03-04 how would i install the DVD player (single din with machine lcd screen) in the bottom hole not top one?

[KUCING]

Here's what I did long time ago: (See pics.. tv in and out)

I put the tv on the lower deck coz if you put on top the screen will hit the center console (top) when opened.

the only problem is that you have to put the gear to Neutral (N) if you want to open the screen.

[johnprocter]

thanks for the pics is that a 7inch screen?

[KUCING]

thanks for the pics is that a 7inch screen?

yes it's 7 inch widescreen Kenwood with touch-screen menus

[johnprocter]

so you installed it on the top bit of the fascia and it didnt cause any problems for you?

[Lochstar_69]

Would the single DIN top mount facia be modifiable to move the Single DIN unit for the bottom and the small compartment on top? i would love to see a facia kit to see if this can be done.
If anyone can help or has some good ideas for a Single DIN pop out, bottom mount in that compartment im all ears.

If not i may have to do some modifications to a Single DIN top mount?
or would i be better buying the honda Double DIN compartment and fitting the Single DIN in that with a compartment on top of it??

SO MANY QUESTIONS haha.

[greg6510]

the other option is www.connects2.com
Im sure there must be dealers in Australia. I am getting the facia plate for my Accord CU2.

[denot]

^^^ wow greg! thanks for the link! I was wondering where can I get the facia for CU2!!! thanks mate!

even though i cant find anything for cu2 on dat link...

[greg6510]

Did you check accessiories/facia plates/honda/accord?

Its the same for the Cu2. I have already ordered the plate for my CU2, you just need to tell them when you enquire.

[crunkman99]

single din dvd players with 7 inch screens wont fit unless its a kenwood, as kenwood can stick out the most. i used to have one but changed to a double din screen alpine, becasue it would always touch the volume knob and it was hard to adjust my ac, and while driving the screen would always vibrate and move hitting the controls.

here is the double din, ill post a pic of the single din a bit later.

[Lochstar_69]

single din dvd players with 7 inch screens wont fit unless its a kenwood, as kenwood can stick out the most. i used to have one but changed to a double din screen alpine, becasue it would always touch the volume knob and it was hard to adjust my ac, and while driving the screen would always vibrate and move hitting the controls.

here is the double din, ill post a pic of the single din a bit later.

So which facia is that one? because in the other forums there are gaps down the side but looks like the perfect fit?