EP3 Type R

[blk_shadow]

95% Same. You need to use DC5 tie rod ends as the EP3 ones are smaller and shave about 4-5mm off the rear lower eyelet to fit!

Whats wrong with your aragosta ones??

Thx mate.

but if someone with DC5, he can use it straight away of the EP3's one, yeah?

nothing wrong, I just want one with the camber adjustment at the top LOL

[Mugen_B16B]

Mugen, you said that you once replaced the mounts with the DC5R's ones. Did you change the whole lot?

if it was, then that means that DC5R has this problem as well and needs to change the mounts often.

i only changed the gb and hydrolic, my rear was still good as my mechanic told me, so i had a spare rear just incase

[Mugen_B16B]

Main problem with the mounts is actually the rear and passenger side. They passenger side one is the weakest, therefore putting alot of pressure on the oil filled drivers side.

I have some 62a ones and hated the vibrations. So I recently reinstalled stock one filled with urathane and is performing very well.

Many might say its dodgy but It has held up very well with a few hard launches at the drags. Trick is to fill them properly and give it time to cure!

Each to their own, but I just couldnt stand the vibration. Rather feel the loud exhaust

funny to say i put 1 mount in and it sounds like a got an exhaust system on now, shifting also feels alot more smooth and can feel it being more responsive

[Mugen_B16B]

The engine bay seems rather dirty.

Is that what happens with a shot engine mount?

yep thats the oil

[KaZe86]

guys we need a few more buyers anyone wanna join the group buy?! add your name!!

http://www.buyasagroup.com.au/

[denrie]

anyone own this EP3 in the forum?

http://www.youtube.com/watch?v=Pk1ic16aQJA

[SuperSteve]

denrie is that ur ep3 in ur avatar ??

[denrie]

nah its not. lol its a pic i found on jdmstyletuning.com

[egads]

anyone own this EP3 in the forum?

http://www.youtube.com/watch?v=Pk1ic16aQJA

http://forum.jdmstyletuning.com/showthread.php?t=11931

[KaZe86]

yeah i was gonna say it sounds like a straight pipe lols i had one on my rolla was awsome but so loud

[Nepolian]

Thx mate.

but if someone with DC5, he can use it straight away of the EP3's one, yeah?

nothing wrong, I just want one with the camber adjustment at the top LOL

To fit DC5 you need, to use some washers up the back eyelet and use EP3 tie rods up front or......grind out the tie rod end hole to fit DC5 ones.!

[blk_shadow]

To fit DC5 you need, to use some washers up the back eyelet and use EP3 tie rods up front or......grind out the tie rod end hole to fit DC5 ones.!

thx Nepolian, I want 2 give u PQ point, but looks like I need to give to others first LOL.