Results 1 to 11 of 11

Thread: Transmission

Threaded View

  1. #4
    Member Array
    Join Date
    Nov 2008
    Location
    Sydney
    Car:
    07 FN2R, 09 FD1
    Quote Originally Posted by aaronng View Post
    Yes, K20A LSD will fit. You might or might not need to shim it to get it to fit perfectly depending on which car the LSD came out of. Don't need the speed sensor gear since the CL9 uses wheel speed sensors.

    Make sure you the LSD from a DC5R or a CL7 Euro R. Wouldn't make sense to take the diff from a regular DC5 since that is an open diff.

    With regards to synchros, it won't fit because the CL9's gearbox uses triple cone synchros for some gears.
    Thanks for the info Aaron, it's good to know that the LSD will fit.
    Is there any other way to modify the cl9s gear ratios shorter rather than replacing the gearbox??
    Would a dc5r gearbox even fit in the euro?

    And aaron have you tested the car out at wakefield park with the lsd?
    Last edited by jyh888; 25-07-2010 at 05:44 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.