Page 20 of 26 FirstFirst ... 1017181920212223 ... LastLast
Results 229 to 240 of 310
  1. #229
    hey guys
    newbie here
    trying to go for the same look ludcres had

    would these fit?

    gold Work VSXX wheels
    17x8 +40 F
    17x9 +40 R

    thanks!

  2. #230
    Yes, need a roll and some camber.

  3. #231
    ^^ thanks for the quick reply,
    would i need much camber? dont want o be chewing through tires.

    thanks again

  4. #232
    Newcomer Array
    Join Date
    Jul 2011
    Location
    melbourne,australia
    Car:
    AP1
    hi guys,i need some help here. does 18x8,5 +40 18x9,5 +40 will fit in s2k. without any problem.
    coz someone wanna sell the rims.thanks guys.

  5. #233
    Member Array
    Join Date
    Aug 2005
    Location
    west smeobourne
    Car:
    AP1 S13
    nop will need roll all round and undersized tyres.
    FYS

    My fake shit rocks!
    Winton 1:35.4
    Wakefield 1:07.87

  6. #234
    Not really for the camber, like -1.5 or -2 is what I use and my tyres wear out evenly and basically no scrub anymore.
    Otherwise do as vyets says and get tyres a little stretch, it's only front you need to worry about. Also depends in how hard you drive! Track?

  7. #235
    Quote Originally Posted by dlai5552 View Post
    Not really for the camber, like -1.5 or -2 is what I use and my tyres wear out evenly and basically no scrub anymore.
    Otherwise do as vyets says and get tyres a little stretch, it's only front you need to worry about. Also depends in how hard you drive! Track?
    sorry is this for my question or somebody elses?
    im looking at purchasing these rims tonight.....

    gold Work VSXX wheels
    17x8 +40 F
    17x9 +40 R

    thanks again!

  8. #236
    Quote Originally Posted by poko_pano View Post
    sorry is this for my question or somebody elses?
    im looking at purchasing these rims tonight.....

    gold Work VSXX wheels
    17x8 +40 F
    17x9 +40 R

    thanks again!
    Oh it was for you. However, when you lower the car, you get a bit of camber anyways, so just roll the guards and that should be fine, depending on your suspension stiffness.

  9. #237
    ^^ thank u!

  10. #238
    S2Krazy Array
    Join Date
    Feb 2005
    Location
    Brisbane CBD.
    As said above.

    My gold BBS RG-R's were 18x7.5 +48 F and 18x8.5 +50 R, but they had skinny tyres that they came with.
    My white Work Meisters were 18x8 +35 F and 18x9 +45 R, with a 225/40/18 front and a 245/35/18 rear. You could easily fit a 255/35/18 rear in there, however both front and rear guards require guard rolling.

    18x8 +35 was a bit of a hack to fit, so I suggest about an 18x8 +40F. The rear was a bit soft in comparison, so I recommend an 18x9 +40 rear - or there abouts - if you want a lowered, semi stanced daily driver capable S2K which offers very little inconvenience that width and offset are spot on IMO.
    --------------------------------------
    PM's Turned Off

    Prelude - Sold.
    S2000 - Sold.
    NSX - Sold.
    F355 - Coming...

  11. #239
    Member Array
    Join Date
    Feb 2008
    Location
    At Work ...
    Car:
    60 EAD
    R 17x9+45 running 255
    F 17x8+45 running 225

    discuss!
    FFamily

    instagram - chumdab

  12. #240
    Quote Originally Posted by ludecrs View Post
    As said above.
    so I recommend an 18x9 +40 rear - or there abouts - if you want a lowered, semi stanced daily driver capable S2K which offers very little inconvenience that width and offset are spot on IMO.
    THANK U EVERY MUCh
    i will take ur advice and get something with that rear and offset....
    can u also recommend me a front?

    sorry im a bike kinda guy and clueless when it comes to cars

    thanks again!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.