EP3 Type R

[Icebox]

Just saw Icebox on the avenue roundabout at Granville. I was walking home ahaha

haha, you see me everywhere, girlfriend needed my car =[ so sad haha

[Perry]

I just installed the window lift kit for my car and now the auto window is stuffing up. When I go to close the driver window by flicking it to manual mode, it raises to the top and then will come down about 5-10cms and stop there. When I close it manually, it will work. Any on how reset the windows. I've tried holding t he button down for 5 secs and also up for 5 and still doesn't reset

unplug battery and plug it back in again.

[-JC-]

No need to beat or cut just make the holes bigger for the radiator support and move it forward and slightly make bigger the part where the latch closes past the rad support

Correct.

[kenny07]

i think i always see 2 EP3-R parked outside the Cecil hill police station

anyone here own them from this forum?

[brody]

I know most people are saying.. get the RBC intake 'Bang for your buck!" etc. But I want something that is going to get me the gains (Obviously not much being N/A) and also have a well-known good quality brand that is going to hold its value when/if it came time to sell, and/or part out. I'm thinking Skunk2, been around for years and have great reviews across all vehicle makes. Any suggestions on other names would be greatly appreciated as I'd like to order it now while I'm away and have a little prezzie sitting at home when I get back:P

[brody]

intake manifold ***

[kenny07]

i dont even have a jack, or id at least change wheels and shit by myself

i dont even know how to use the EP3 jack to lift my car... was driving home one morning from girlfriends house so i could get ready to go to work

on the way home, rear tyre ripped apart.. thought it was flat, so took it to servo to pump the tyre up but when i saw it, it was ripped badly!

got home, took the jack out, looked at it while scratching my head and going WTF?!?????
-_-!

at the end, ended up using my family car's jack!

-________________________-!

[butterfingers]

is it normal for the 1>2, 2>3 and 3>4 shift to feel loose/less solid at high rpms? as if the shifter just pops out more easily and slides into the next gear roughly.

Would having a lighter shift knob also help with shifting feel. Currently have a weighted blox ball. Feels nice when granny shifting but not at high rpm

[Poeter]

No need to beat or cut just make the holes bigger for the radiator support and move it forward and slightly make bigger the part where the latch closes past the rad support

Any references or diagrams floating around the internet to locate these holes?

Kinda curious.

[JDM EP3]

Any references or diagrams floating around the internet to locate these holes?

Kinda curious.

Im sure there is plenty floating around on EP3 forums, this ebay listing has a example of it

[Poeter]

Thanks.

Have you done this mod on your ep3 too?

[JDM EP3]

No not yet, would love to do it but funds arent really flowing at the moment.
Its a fairly unintrusive way to do this mod without cutting into the support.