Your Mods To 2006-2011 FD Civics

[curtis265]

Yeah, don't wanna dump it. CBF maneuvering over humps. I do however wanna give it some negative camber without impacting too much on ride height. Trying to figure out that sweet spot of camber. Is that even possible? Any advice?

With rims, I've been eyeing on
IMG]http://i220.photobucket.com/albums/dd29/pheonix_knight1/crkaiwhite_266_266_85_c1.jpg[/IMG]
IMG]http://i220.photobucket.com/albums/dd29/pheonix_knight1/advanti-eco_large_main_266_266_85_c1.jpg[/IMG]
Leaning towards this Advanti.
IMG]http://i220.photobucket.com/albums/dd29/pheonix_knight1/advanti2012-samurai-wht_large_main_266_266_85_c1.jpg[/IMG]

Camber is used for better handling on the track or fitting rims under guards because stance|works.

if you're keeping that height then i wouldn't bother as it will just wear your tyres out unevenly.

you also cannot adjust camber without the relevant camber tops which usually come with aftermarket coilovers

I like the cr kai the most lol.

[Harricade]

Makes my decision easy! =D Thanks Curtis!
Figures it's the most exp. =P
What's Jamie's wheels? They looks awesome.
I'd get new brake discs and calipers at the same time if I did this. So gonna have to start saving.

[Baygon]

I like the cr kai the most lol.

+1 to cr kais

Also not feeling those tail lights..

[lolmclol]

Works CR Kais, or if you want something lighter, Enkei PF01, then plasti-dip them white.

[veng89]

Installed my SRI today!

[lolmclol]

Installed my SRI today!

K&N Typhoon?

Not bad mate

[veng89]

K&N Typhoon?

Not bad mate

Yup! Imported straight from Merica'.

[lolmclol]

Yup! Imported straight from Merica'.

Good choice, I liked the design of the K&N typhoon to be honest.

[EKVTIR-T]

Good choice, I liked the design of the K&N typhoon to be honest.

but_not_jdm

[curtis265]

True¡ enkeos are quite cheap!

Harith, are u sure about brakes... They really costly..

The work wheels will earn you instant jdm respect

[black8thgen]

yeah dude sack brakes... unless you're doing an engine swap or going boost there's no need to spend that big coin on a brake upgrade

[j_me]

Makes my decision easy! =D Thanks Curtis!
Figures it's the most exp. =P
What's Jamie's wheels? They looks awesome.
I'd get new brake discs and calipers at the same time if I did this. So gonna have to start saving.

Welcomeee! My rims are XXR 530s!

Works CR Kais, or if you want something lighter, Enkei PF01, then plasti-dip them white.

I plastidipped my XXRs are they are seriously the worst to clean, all the dirt gets like stuck inside and no matter how hard I scrub it doesn't come off!! I wanna get them powder coated, or just get rid of them hahaha