Your Mods To 2006-2011 FD Civics

[LetsDuDiss]

how did the paint job go?

Only did two. Gonna do the rest during the week. I got a spare wheel so no worries LOL. And I don't know how to paint the centre cap, ended up masking them off anyway

Got some paint the on front tyre as well. Ran out of masking tape at the time. I dont know how to get rid of them. I hope it will flake off as I drive, or just black permanent marker LOL

[SharkChu]

Only did two. Gonna do the rest during the week. I got a spare wheel so no worries LOL. And I don't know how to paint the centre cap, ended up masking them off anyway

Got some paint the on front tyre as well. Ran out of masking tape at the time. I dont know how to get rid of them. I hope it will flake off as I drive, or just black permanent marker LOL

Wing looks good =D

[chrischris]

Only did two. Gonna do the rest during the week. I got a spare wheel so no worries LOL. And I don't know how to paint the centre cap, ended up masking them off anyway

Got some paint the on front tyre as well. Ran out of masking tape at the time. I dont know how to get rid of them. I hope it will flake off as I drive, or just black permanent marker LOL

I did the centre caps on my stock rims, looks better i think, just sand them a bit, and after you spray it white, put a sticker on the middle, something like this

bit hard to see the decals, cant find any close up shots


regarding spraying the inside, you can see in this picture that it is very noticeable if you do it or not

[threesix]

"I believe I can fly"

[jprak]

Caught my bae staring at me when I sleep


Lelz


Sup guys!

[*DAN*]

Orrrrr just wait for new turbo Type R. Orrr get a turbo charged. Unless you love N/A LOL

I actually do love N/A haha, havent driven a boosted car thats managed to convince me into getting a turbo

1) buy teh s2k you won't regret it. i would never turn back

2) don't start tearing apart your car until you're certain you can go all the way... nekminnit dead daily for 6 months

Hopefully ill be able to get one in the near future haha, just lowered my car and i sort of want to keep it now.. LOL

[Honda_FD]

Caught my bae staring at me when I sleep


Lelz


Sup guys!

LOL This random guyy!
So, Mr. Prak,
Tell us what happened to your bags!

[jprak]

Lol!!!
Bag moved around

Line exposed to wheel

Same as last time

I made sure it won't rub + running ce28 reps on front and type F rear

[FDYOU2]

jprak, heard your mates a panel beater. how much for front bumper spray roughly? and is he legit? Thanks.

[lolmclol]

Jprak's too legit to quit

Swag swag ~ ~

[jprak]

Jprak's too legit to quit

Swag swag ~ ~

oh yew...
<3

jprak, heard your mates a panel beater. how much for front bumper spray roughly? and is he legit? Thanks.

hes legit... LOL? how can one be a panel beater and not be a legit one? ! ill msg you the quote when i find out.

type R front yea?

[LetsDuDiss]

Wing looks good =D

LOL nah man, I fked up hard in that paint job. Show us your DRL!

I did the centre caps on my stock rims, looks better i think, just sand them a bit, and after you spray it white, put a sticker on the middle, something like this

bit hard to see the decals, cant find any close up shots


regarding spraying the inside, you can see in this picture that it is very noticeable if you do it or not

Are those stickers from canada? I think i've seen them, looks funny to me. I ended up ordering a set from an EP3 site in UK, I'll cancel it if someone can show me where to buy in Australia. I sprayed the centre cap today without sanding, there were wrinkles developed LOL guess ill sand them all off tonight. Got 1 more wheel to go

I don't know how you managed to sprayed one wheel with one can LOL. I didn't spray the inside and one can barely lasted it. I had to do 5 coats for an even and white coverage. I guess the EP3 rims have gaps that are hard to reach, that's why I had to waste a lot paint. So yeah made the right choice LOL. See how it turns out. And I always run into a problem where I spray a heavy coat of clear and the base coat seems to fade off at the area with heavy clear. Any explanation? I can't help it but feel if I don't spray the clear heavy enough, I won't have a glossy finish