Page 1 of 4 1234 LastLast
Results 1 to 12 of 47
  1. #1
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs

    D16Y1 into EG Hatch Breeze - How much ?

    Just wondering how much a D16Y1 would set me back dropped into a EG Hatch Breeze, I understand that it's a tad more money going to EFi from Carby, but what would a rough estimate in price be ? I've seen D16Y1 motors go for as cheap as $300 in good condition!

    Cheers
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    whats y1 tiksie?
    im interested in this as well. doing exactly the same. you doing it yourself tiksie?
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  3. #3
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    sell your breeze for 3-4 k then u can get a vti eg 5-6k
    so conversion will cost u 1-2k u get extras on top
    rear dics brakes sun roof electrics etc etc

  4. #4
    Member Array
    Join Date
    Jan 2008
    Location
    SyDneY SouTh WesT y0!
    Car:
    98 EK
    yeh 90lans right
    dont bother with the conversion.. itll cost like half your car... just get an eg5 vti
    same engine more extras like sunroof & rear discs blah blah
    ||bye bye civic || hello awd turbo ||

  5. #5
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Quote Originally Posted by 90LAN View Post
    sell your breeze for 3-4 k then u can get a vti eg 5-6k
    so conversion will cost u 1-2k u get extras on top
    rear dics brakes sun roof electrics etc etc
    VTi's cost an arm and a leg.

    I just sold my VTi lol, now I got the breeze..It's a good healty motor in it and what not, but it's just WAY too slow for my liking..Not for being a boyracer but general driving.

    I'm sure I can score a healty D16Y1 installed for <$1500

    Just wanting other peoples advice first.

    And I can't afford to sell this car and look for another car..I don't have the time.
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  6. #6
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Quote Originally Posted by mocchi View Post
    whats y1 tiksie?
    im interested in this as well. doing exactly the same. you doing it yourself tiksie?
    Aus spec SOHC VTEC found in Aus delivered EG5's.
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  7. #7
    ignore this...

  8. #8
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    Quote Originally Posted by tiksie View Post
    VTi's cost an arm and a leg.

    I just sold my VTi lol, now I got the breeze..It's a good healty motor in it and what not, but it's just WAY too slow for my liking..Not for being a boyracer but general driving.

    I'm sure I can score a healty D16Y1 installed for <$1500

    Just wanting other peoples advice first.

    And I can't afford to sell this car and look for another car..I don't have the time.
    but u have time to do the conversion and find the parts ? go figure

  9. #9
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Quote Originally Posted by 90LAN View Post
    but u have time to do the conversion and find the parts ? go figure
    I've heard conversions take a weekend ? Lol, I'd rather that then wait to sell my car, then wait for a car to pop up and be carless in that time frame.

    And no, I am not planning on doing it myself, just a general question as I have seen people offer motors and offer labour for $500> into EFi's and $800 into Carbys.

    Cheers

    EDIT: I have seen those offers on OzHonda ofcourse.
    Last edited by tiksie; 23-11-2008 at 10:12 PM.
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  10. #10
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    wreckers for all parts, and mechanic next stop. the thing is how long does it take at the mechanic.
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  11. #11
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    Quote Originally Posted by tiksie View Post
    I've heard conversions take a weekend ? Lol, I'd rather that then wait to sell my car, then wait for a car to pop up and be carless in that time frame.

    And no, I am not planning on doing it myself, just a general question as I have seen people offer motors and offer labour for $500> into EFi's and $800 into Carbys.

    Cheers

    EDIT: I have seen those offers on OzHonda ofcourse.
    u need fuel tank/pump, fuel lines, complete wiring loom,
    u will need to get it engineer with rear disc etc etc
    u must be very patient and have plenty of money to spend
    not to mention taking the dash off to fit loom too thats the fun part
    and not to mention trying to get it to work
    plus what u think a mechanic is going to charge u to do this ?

  12. #12
    Member Array
    Join Date
    Mar 2008
    Location
    treasury casino
    Car:
    150 bus
    as lan said you get many extras on top. you get sway bars. electric windows, electric sunroof . tacho ? lol. and they go for about 5 grand if u look hard enough. even for a lightly modified one.

    breeze u need fuel tank aswell. and u need to get rear disc brakes. vti already got it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.