***Official What did you do to your EK today***

[jks24]

It comes from factory a certain way for a reason.

[Dyln.bxtr]

That certain way is due to their studies finding that it allows the control arm to be stronger if in a side impact. Much like an egg, top to bottom you can't crack it. It also allows the camber to act in a certain manner when the car is lowered, without removing the structural and strength integrity within the LCA.
However, as I had stated in my actual thread, with +/- 0 offset and rush for work/uni I had very little time to do things in any other way (study full time, work as a contractor mon- fir and retail on weekends). I required an inch of height, and due to the design, turning them over allowed the extra inch, with the downside of shifting that camber and running the risk of damaging the LCA. I plan to replace LCA with camber, therefore, the tyres and scrub outweighed any possible strength lost from the LCA. It also allowed the tyre and wheel to square up and sit flat, rather than camber in.

[cbauto]

I required an inch of heightJust because you were in a rush, that's why you decided to do it the dodgy way?
potato gon potate


if you require an extra inch, why not just do it the normal way?

http://i1.ytimg.com/vi/Bwo0Sdju1-o/0.jpg

[Dyln.bxtr]

Just because you were in a rush, that's why you decided to do it the dodgy way?
potato gon potate



What makes it dodgy? What are the factors behind that reduces any strength or stability??

I have been hearing plenty if you guys being "trolls" yet it's just the same blank answers over and over.
Do you guys actually know what you're talking about? Or just a group of trolls who are on a bandwagon together??

[AndreaCivic]

Installed some goodridge braided lines and some new PMU pads.
http://img.tapatalk.com/d/14/07/21/debeqava.jpghttp://img.tapatalk.com/d/14/07/21/y8a9ujeq.jpg
Going to a Trackschool day on the 28th so hopefully get some nice brake pedal feel.. Will write a review and comparison between the dixcel z type pads after the track day :)

[SHOGUNOVDDRK]

Flippin lca's trollololol.

Went to see Yonas ages ago, installed in the dark. Fitment was good but cbf'd shaving it. So it fits how I like dem vaginas - tight bro

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20140722_232044_zpsre4xgf3a.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20140722_232044_zpsre4xgf3a.jpg.html)

thanks to Oz.

[2MPRS]

i told you we should flip the lcas to get that extra inch but you never listen do you

[grifty]

Flippin lca's trollololol.

Went to see Yonas ages ago, installed in the dark. Fitment was good but cbf'd shaving it. So it fits how I like dem vaginas - tight bro



thanks to Oz.

Looking good mun!

[SHOGUNOVDDRK]

i told you we should flip the lcas to get that extra inch but you never listen do you
Should-a
Could-a
Would-a
But
Didn't.

Looking good mun!
Cheers Ram. It looks nice from far but it's far from nice.

[AndreaCivic]

Here's a little video from Monday!

http://youtu.be/b8LD-0IFI98

[Tosies]

Nice lap mate!
What tyres were you running?

[AndreaCivic]

Thanks man, haha wish I could say nexens but I was using toyo R888s..
I'm running only -1° camber so I couldn't fully utilise the tyre properly though..
You don't happen to know if the stock UCA have any adjustability?

[mocchi]

need more mattsrea post. miss his car in this thread

[mattsrea]

ahaha sorry to disappoint you mocchi! Haven't done anything to my car within the last couple months been on a budget since family will be moving houses next year so gotta watch what i spend and uni life lol, hard maintaining that D and HD haha. Well back on topic, kinda new pic, gave my car a wash and got that whale pen!s intake :) sounds nice!


http://imagizer.imageshack.us/v2/1024x768q90/633/DwewLV.jpg
http://imagizer.imageshack.us/v2/1024x768q90/540/UO6CKB.jpg
http://imagizer.imageshack.us/v2/1024x768q90/742/HeTfjt.jpg

[IEVAQ8]

raced it at calder again
http://i287.photobucket.com/albums/ll147/ievaq8/ek%20civic%20build/IMG_5436_zpsvs2n5fkm.jpg

http://i287.photobucket.com/albums/ll147/ievaq8/ek%20civic%20build/IMG_5473_zpsgqtdq0cw.jpg

[[stealth]]

awesome tom how u go??

[carayan]

no snapped shafts?

[IEVAQ8]

;3916711']awesome tom how u go??
Ran 12.95 @ 124.2mph on street tyres
And 12.7 @ 120mph on semis but I bogged down second really bad

no snapped shafts?
I sure did...
but I took spares....check my build thread, I did a right up with pics of the day

[carayan]

Ran 12.95 @ 124.2mph on street tyres
And 12.7 @ 120mph on semis but I bogged down second really bad

I sure did...
but I took spares....check my build thread, I did a right up with pics of the day

just checked it out, glad you came prepared. maybe billet shafts on the cards? :cool:

[IEVAQ8]

just checked it out, glad you came prepared. maybe billet shafts on the cards? :cool:

Gonna try some other stuff b4 I head that way...

[amant02]

WOW 12.7 and you reckon you Bogged 2nd gear?

Pretty fast car man. Good work!

Any plans on attacking that 11 second?

[IEVAQ8]

WOW 12.7 and you reckon you Bogged 2nd gear?

Pretty fast car man. Good work!

Any plans on attacking that 11 second?

Thanx mate....
yeh I bogged second and shifted early from.first to save from breaking another drive shaft...

the car makes 305kw at wheels...
im hoping to run mid to high 11s on this tune with some adjustments to boost in first gear...

[AndreaCivic]

Awesome bro, car looks mint. 305kw **** me. I have 105 atw haha

[naturaltone]

took pix of them
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10616035_686171174790525_3107135320843984358_n.jpg
https://scontent-a-lga.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10525808_685979844809658_1506734516328370014_n.jpg

[Alvis]

Should be fun getting these installed! Any tips appreciated
27343

[cbauto]

Make sure you get the right clip in the right location.

Make sure screws are tight. Use threadlock even. Have been known to fall off.

[amant02]

I also used double sided tape on mine for extra security.

[carayan]

those small nuts or w/e that hold the bracket to the visor are VERY fragile

i learnt the hard way

[ekx105]

http://i1139.photobucket.com/albums/n543/ohhneiloh/Mobile%20Uploads/photo_zps87db6c4c.jpg

[EKVTIR-T]

can we see the whole car pls ^

[ITEAZR]

took pix of them
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10616035_686171174790525_3107135320843984358_n.jpg
https://scontent-a-lga.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10525808_685979844809658_1506734516328370014_n.jpg

hood protector on face lift front looks dope!!

good work bro

[Alvis]

They definitely aren't the easiest things to install but finally done (with very sore fingers)
27350

[Alvis]

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/2EBBAFDB-1ABF-492F-B771-37633F1387F1_zpslcwam1sl.jpg (http://s1132.photobucket.com/user/apalmucci/media/My%20Civic/2EBBAFDB-1ABF-492F-B771-37633F1387F1_zpslcwam1sl.jpg.html)

[Alvis]

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/92B99900-FE5A-4F5C-B269-73AC41A30B18_zpsawrsabab.jpg (http://s1132.photobucket.com/user/apalmucci/media/My%20Civic/92B99900-FE5A-4F5C-B269-73AC41A30B18_zpsawrsabab.jpg.html)

[carayan]

http://tapatalk.imageshack.com/v2/14/08/29/020b84e0dc7f3f7fc36d0858c1fca6ad.jpg

[Tamagochi]

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/92B99900-FE5A-4F5C-B269-73AC41A30B18_zpsawrsabab.jpg (http://s1132.photobucket.com/user/apalmucci/media/My%20Civic/92B99900-FE5A-4F5C-B269-73AC41A30B18_zpsawrsabab.jpg.html)

OEM FTW! looks good.


http://tapatalk.imageshack.com/v2/14/08/29/020b84e0dc7f3f7fc36d0858c1fca6ad.jpg

Looks good.

[ekx105]

Install of item and bought an item

TopFuel B-C Pillar Brace

http://i1139.photobucket.com/albums/n543/ohhneiloh/Mobile%20Uploads/photo_zpsfc9165cc.jpg

Fujitsubo Giken Legalis R Muffler

http://i1139.photobucket.com/albums/n543/ohhneiloh/Mobile%20Uploads/photo_zps12f7deb6.jpg

[Tamagochi]

Install of item and bought an item

TopFuel B-C Pillar Brace

http://i1139.photobucket.com/albums/n543/ohhneiloh/Mobile%20Uploads/photo_zpsfc9165cc.jpg

Fujitsubo Giken Legalis R Muffler

http://i1139.photobucket.com/albums/n543/ohhneiloh/Mobile%20Uploads/photo_zps12f7deb6.jpg

NICE! HOW and Where did you get that FGK Legalis R Muffler? I WANT ONE!
Btw anymore photos of the engine bay? looking good so far.

[dave_biscuits]

Today's project, upgrade headlight loom wiring, fit 55/100W bulbs.

The results according to my light meter...

Loom upgrade vs oem loom, standard Phillips 55/60W
Hi: 18% brighter
Lo: 16% brighter

Loom upgrade with 55/100W vs oem loom, 55/60W bulbs
Hi: 50% brighter
Lo: 16% brighter

Upgraded loom consisted of chunky OFC speaker wire i found on a verge side collection, high and low beam relays, and ceramic H4 plugs (ebay, $1ea).

[dangitnghia]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10716094_4799403998743_1079039099_n.jpg?oh=9f4a8ec ed05cd985cd8c445939fb8284&oe=542921FD&__gda__=1411968992_648e47fa9bb6fd96c1ae228f2f7b43b 2

Converted my manual windows to power using gli parts. also retrimmmed the old and ugly armrests.

[tangk]

http://i62.tinypic.com/dbpn3a.jpg

Had some left over sticker cutouts and had a thought, 'hey why not do this..'

[iwearmoccos]

http://tapatalk.imageshack.com/v2/14/09/28/f0728226740d5509c7a3c6a4be765cfe.jpg
First hill climb in my recently purchased EK4. Stock except for the wheels and AD08R tyres. I enjoyed it thoroughly.

[Root Beer]

Added wheels.

[MAZ.827]

installed that front lip yo

http://i1370.photobucket.com/albums/ag258/MAZ827/Mobile%20Uploads/499B3D4C-2B33-4C4E-A4AC-33E0EFC4B06A_zpscase3c9u.jpg

http://i1370.photobucket.com/albums/ag258/MAZ827/Mobile%20Uploads/3CA9683B-803B-414E-B8C6-8F3755450E63_zpsxmi3yvr5.jpg

[EKVTIR-T]

engine room and under hood so damn clean ^

[MAZ.827]

engine room and under hood so damn clean ^

Thanks maaan

[1991.1994]

front mount done!http://i228.photobucket.com/albums/ee180/malley_rms/boosta.jpg (http://s228.photobucket.com/user/malley_rms/media/boosta.jpg.html)

[grifty]

is that a interfooler?

[1991.1994]

nah just test mounted in the process of putting all my turbo gear on

[u mad?]

lmaooo interfooler

[mattsrea]

ahahaha interfooler! What kit are you using 1991.1994?

[1991.1994]

Not sure too be honest I bought a crashed turbo one and im striping it down and putting it all on my sedan

[mattsrea]

ohh i see, keen to see more! keep us updated!


Well to stay on topic, recently purchased oem nose mask + hood bra, but only decided to put on hood bra for now. Still needs some adjusting to fit right but thats it for now.
http://oi57.tinypic.com/2dufhq1.jpg

[mocchi]

fuark so good

[MAZ.827]

might be a little after the date of the mega meet, but ehhhhhhh, took my D baby down to the fitted mega meet on friday at sydney dragway eastern creek.. met some people got some stickers looked at all the hondas, none of them are rocking the OzHonda stickers and OMG them chicks be loving my EK

http://i1370.photobucket.com/albums/ag258/MAZ827/Mobile%20Uploads/82804FA0-E503-4FAC-AC40-B69D6F7D4F73_zpsepsoueho.jpg

DAT ASS (the one on the left made me take my p plate off cause of the pro camera guy) BUT DAT ASS
http://i1370.photobucket.com/albums/ag258/MAZ827/Mobile%20Uploads/C26E4A10-F7E2-4DC0-93DC-ACEEC64675BC_zpsabwgrgxl.jpg

[EKVTIR-T]

haha civic brings da honeyz

[Root Beer]

King ultra lows, koni streets, lowest setting and flipped perch.

[cbauto]

King ultra lows, koni streets, lowest setting and flipped perch.
no function, no form

[Root Beer]

no function, no form


Haters gon hate

[cbauto]

Haters gon hate
potato gon potate

[grifty]

King ultra lows, koni streets, lowest setting and flipped perch.

have fun bottoming out

[Dyln.bxtr]

have fun bottoming out


no function, no form

If it's what the kid wants, then let him have it. He'll learn what he likes eventually, by his own accord.

[cbauto]

If it's what the kid wants, then let him have it. He'll learn what he likes eventually, by his own accord.
by all means. but if you post on a public forum, prepare to be judged and dont complain.

[Root Beer]

No complaints. I know its better than yours.

Extended top hats rectified that issue.

[Super-DA9]

Lmao dat slam duck tuck pope effect

I hear there's a sneaky trick you can do with your LCAs to help prevent bottoming out

http://www.ozhonda.com/forum/customavatars/avatar39707_5.gif

[u mad?]

swap you uca with your lca

i can confirm no bottoming out

kind regards,

Sean

[Vvvtec]

Ur all just haters






Hehe

[Root Beer]

Diy on uca to lca?

[Super-DA9]

Ur all just haters






Hehe

Hay naow

Ur a roksta

Get ya gaim on

Go plae

[PHO]

dc2r is best

[amant02]

dc2r is best

DC5R is bestest.

Its a word. Google it.

[Dyln.bxtr]

¿por qué no los todos? http://tapatalk.imageshack.com/v2/14/10/14/9bec719e081c2e116872bc82035ccd4b.jpg

[integraR]

DC5R is bestest.

Its a word. Google it.

fn2 best coz of yr made

[Vvvtec]

Dc5 is shithouse

[MAZ.827]

EK is da best

[grifty]

EK is da best

das it

[Slowd16]

Polished my exhaust manifold shield and also done the DIY ek9 tail light mod :thumbsup:

[cbauto]

Polished my exhaust manifold shield and also done the DIY ek9 tail light mod :thumbsup:
bay looks clean.

keep it up.

[Slowd16]

bay looks clean.

keep it up.

Thanks man, would be nice to relocate the battery or at least tuck the cables and also the accelerator cable and brake booster hose

[Dyln.bxtr]

I'm loving that. Would look mean with the full tuck completed.
It's just a process take each step as you can.

Has anyone been getting this either? It's bugging me each time I try opening a new thread.

http://tapatalk.imageshack.com/v2/14/10/16/69bb797bbb1b11bbc0eb9efa1b82134b.jpg

[mattsrea]

done diy parker indicators last couple days.

indicator is now using dual filament globes, parkers are dimmer then indicators and i wired it into the oem foglight switch so i can turn it on and off anytime my lights are on :)
27482
27483

[MAZ.827]

done diy parker indicators last couple days.

Indicator is now using dual filament globes, parkers are dimmer then indicators and i wired it into the oem foglight switch so i can turn it on and off anytime my lights are on :)
27482
27483

dayummmmm

[grifty]

got my CF look auto climate control setup today

http://i57.tinypic.com/2udyuxs.jpg

[cbauto]

got my CF look auto climate control setup today

http://i57.tinypic.com/2udyuxs.jpg
inb4 selling on for profit

[Vvvtec]

Why are you modding your daily

[carayan]

dafuq ram where did you find that

[PHO]

dafuq ram where did you find that

hehe.

[grifty]

dafuq ram where did you find that

Got dem NZ contacts hehe

[mocchi]

inb4 selling on for profit

1st bid $2.95

[grifty]

1st bid $2.95

I actually won a set of tail lights for $2 lol

[cbauto]

Strong ignore me and Alex

[Vvvtec]

Lmaoo

[IEVAQ8]

got my ek retuned for boost per gear...
made a very easy and healthy 314kw on 14.7psi @ 8500rpm...BP pump 98

[carayan]

got my ek retuned for boost per gear...
made a very easy and healthy 314kw on 14.7psi @ 8500rpm...BP pump 98

better 60ft? better 1/4?

[IEVAQ8]

better 60ft? better 1/4?

that's the idea...
fingers crossed tomorrow's melb weather clears up early enuf to head out to calder park again...

[tangk]

Installed my sliding arm rest today :)
http://i62.tinypic.com/28h36ag.jpg
http://i57.tinypic.com/bdk6k4.jpg

[SHOGUNOVDDRK]

I'm not a fan of the slider arm rest, but daaammmn that must've been a pain to find. Are you happy with it?
Good work tangk.

I've got a mad jdm black hood (will be resprayed in time), I bought ku31's for $82.50 a piece and put them on on a few weeks back. I've gotta say, they feel better then what I had on before (re002/ecopia)

I more recently replaced my thermostat and put a new sticker on the car (even gained a gear and a few kw on the butt dyno)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/IMG_20141123_183112_zpsfba9muxm.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/IMG_20141123_183112_zpsfba9muxm.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20141123_121557_zpsho0rtmun.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20141123_121557_zpsho0rtmun.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20141119_122106_zpstbo2dgfp.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20141119_122106_zpstbo2dgfp.jpg.html)

[Vvvtec]

hahahah stickers are sick loid

[tangk]

I'm not a fan of the slider arm rest, but daaammmn that must've been a pain to find. Are you happy with it?
Good work tangk.

Haha it's so good with a bucket seat, can finally rest my arm on something. Took forever to find though, but was well worth it!!

[SHOGUNOVDDRK]

hahahah stickers are sick loid
lmzo, they're pretty shitty aye.
I'll get new ohsc stickers made up soon, these ones didn't come out veddi mice.

Haha it's so good with a bucket seat, can finally rest my arm on something. Took forever to find though, but was well worth it!!
Dat arm rest pimpin feels m80, y'all just need a grill, a cane and yo pimp hat and dunn.

[carayan]

Haha it's so good with a bucket seat, can finally rest my arm on something. Took forever to find though, but was well worth it!!

ur sedan makes me moist

[Root Beer]

Anyone recommend places to swap a b16 into my ek1 in Newcastle?

[tangk]

ur sedan makes me moist

pls m8 f1te me

[grifty]

pls m8 f1te me

You dynoed the thing yet or what?

[tangk]

You dynoed the thing yet or what?

Do you mean the supercharged D16?
If you do, that's my bros sedan haha, we both have sedans
And not yet, a lot will be changing in the not too distant future

[grifty]

Haha yeah I didn't realise it was your brothers!

Do you have a pic of the supercharger, I've heard about it but have never seen it.

[tangk]

Haha yeah I didn't realise it was your brothers!

Do you have a pic of the supercharger, I've heard about it but have never seen it.

Could only fish out a terrible picture on my phone, ill upload one / pm you a better pic tomorrow or day after
http://i60.tinypic.com/rbi1yc.jpg

[carayan]

http://tapatalk.imageshack.com/v2/14/11/27/ea12601525598938618da384a8d5f308.jpg

Ek4 seats yessss, shittest photo quality

[carayan]

pls m8 f1te me

excuse me thats not very nice

ill fite u

[grifty]

Painted the rocker cover blue
http://i62.tinypic.com/10r78rs.jpg

[tangk]

Painted the rocker cover blue
dat funnel + rain d0e

[grifty]

dat funnel + rain d0e

yeah water is expensive these days so i make use of rain water whenever possible

[rubixcube]

Painted the rocker cover blue
http://i62.tinypic.com/10r78rs.jpg

yeah because the ONLY difference is the valve cover... ;)

[grifty]

yeah because the ONLY difference is the valve cover... ;)

Yeah man, It was pretty tough trying to paint it. All up took about 6hrs....

[mattsrea]

after 2 days of working on this and 2 weeks on waiting for parts, finally got s2k cluster up and running! Everything works thanks to the Ktuned AIO Converter box!
With the small gap issue on the side, instead of doing a custom bezel for it like everybody has, i decided to do a custom surround that would suit the EK at front and S2k at back, but will start on it next week. In the meantime enjoy! Sorry for large pics
http://i62.tinypic.com/2chq2xk.jpg
http://i60.tinypic.com/esj593.jpg
http://i57.tinypic.com/2j507r4.jpg

[ITEAZR]

That looks sexy how much did everything set you back

[mocchi]

fuark looks ballin

[EKVTIR-T]

looks sick

have you consider white,bit more modern

http://www.qube-engineering.com/Referenced/LEDDash-White4.jpg

[mattsrea]

Thanks! Everything set me back about $600 because i didn't buy a straight up plug and play harness. I rather spend 2 days wiring everything up than spend $250USD on something pre-done.

And yeah i considered that conversion by Qube Engineering but i don't know how to unplug the computer circuit board at the back of the cluster. Don't want to yank the 3 plugs out they seem really fragile.

[mugen_ctr]

The only thing that puts me off from doing s2k cluster is knowing full well that the engine will never spin to 9000rpm LOL

dat 7000rpm limiter life :(

[grifty]

The only thing that puts me off from doing s2k cluster is knowing full well that the engine will never spin to 9000rpm LOL

dat 7000rpm limiter life :(

need a B18c swap m8

[u mad?]

looks sick

have you consider white,bit more modern

http://www.qube-engineering.com/Referenced/LEDDash-White4.jpg
that looks awesome

[mattsrea]

Yeahh that 7k limiter life lol. Nah I'll do a swap later when I have enough cash lol.
But yeah that qube engineering led conversion looks nice. Just not sure on how much it cost.

[wahyu4ever]

I tried cleaning my engine bay today! Just not sure how to post my pictures up here sorry.

Btw. I own a EK hatch k24 oem build setup.

[TbM]

fixed my overheating issue by modifying an oem thermostat and getting it to fit into the k tuned thermostat housing. system is bled now time for some vtec.

http://i1352.photobucket.com/albums/q646/tbmindustrys3/IMAG1832_zps0f9208eb.jpg (http://s1352.photobucket.com/user/tbmindustrys3/media/IMAG1832_zps0f9208eb.jpg.html)



I tried cleaning my engine bay today! Just not sure how to post my pictures up here sorry.

Btw. I own a EK hatch k24 oem build setup.
sign up to photobucket and upload pics there.

[amant02]

or upload to imgur no acc needed!

[grifty]

fixed my overheating issue by modifying an oem thermostat and getting it to fit into the k tuned thermostat housing. system is bled now time for some vtec.

[URL=http://s1352.photobucket.com/user/tbmindustrys3/med


sign up to photobucket and upload pics there.

I thought you said it wasnt overheating?

[carayan]

I thought you said it wasnt overheating?

that was me, you might have us confused

[TbM]

I thought you said it wasnt overheating?

it was overheating with the supplied k tuned thermostat, with a modified d16 thermostat fitted in the housing it doesn't overheat.

[EKVTIR-T]

get a tridon high flow

http://media.supercheapauto.com.au/sca/images/thumbs/299463-thumb.jpg

[integraR]

fixed my overheating issue by modifying an oem thermostat and getting it to fit into the k tuned thermostat housing. system is bled now time for some vtec.

http://i1352.photobucket.com/albums/q646/tbmindustrys3/IMAG1832_zps0f9208eb.jIMG] (http://s1352.photobucket.com/user/tbmindustrys3/media/IMAG1832_zps0f9208eht[IMG)



sign up to photobucket and upload pics there.


bling bling

lookin good n8

[cbauto]

get a tridon high flow

http://media.supercheapauto.com.au/sca/images/thumbs/299463-thumb.jpg
doesnt look jdm

[tangk]

Do you have a pic of the supercharger

Forgot to upload
http://i58.tinypic.com/2yjrjau.jpg

Also, heres a pic of the headers if you're interested
http://i57.tinypic.com/333ev0y.jpg

[grifty]

wowowowowow!

never seen legit mugen D series headers!

[tangk]

wowowowowow!

never seen legit mugen D series headers!

hahaha, dem feels when my bro swapped me for ebay headers..

[mattsrea]

New wheels! 16" Buddyclubs, thoughts on wheel color or leave as is? I was thinking of painting it white (just 2pack paint not powdercoating)
http://i58.tinypic.com/1z6sk9d.jpg
http://i62.tinypic.com/2cxuo7o.jpg

[dr1ftaX]

Love those classic Buddyclubs, would look good in either colour but I think white would look schmick!

[SHOGUNOVDDRK]

Classic buddy clubs are sick m80

dr1ftaX +1 on white (classic colour for dem wheels) but why not go a red or a green?

[SHOGUNOVDDRK]

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_141210_zpsdopqaxld.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_141210_zpsdopqaxld.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_143123_zpsu4isvaba.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_143123_zpsu4isvaba.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_143116_zps6p7yxkh3.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_143116_zps6p7yxkh3.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_143046_zpsawa40ne5.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_143046_zpsawa40ne5.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_143037_zpsfju6wxmi.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_143037_zpsfju6wxmi.jpg.html)

Buyer pulled out so I put this on, took the BBS's off and started to get ready to let the bish go again.

I thought this would've looked like shit and fit worse but I'm ok with this, thanks eBay.

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_143004_zpsvhdkrfum.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_143004_zpsvhdkrfum.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150104_142949_zpst7poe0w8.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150104_142949_zpst7poe0w8.jpg.html)

[mattsrea]

Thanks white was on my mind too, I wasnt sure on red or green SHOGUNOVDDRK, worried they will only be short term colors I will like, might just go white but later. Gunmetal might grow omto me haha

[carayan]

gladus is going??
nooooooooooo

[EKVTIR-T]

grey ftw


nice interceptorz loido

[SHOGUNOVDDRK]

Gunmetal might grow omto me haha

Give white a chance hehe or why not blonde? lmao

gladus is going??
nooooooooooo
lol in the future she will be gone.


nice interceptorz loido

Should do white walls, white ftw

[mattsrea]

Give white a chance hehe or why not blonde? lmao


maybe haha i'll see how it goes. Like how your eks going too btw, looks mint!

[grifty]

haha shiiii, what's with the chasers Lloyd?

[mocchi]

fuark what a beast bro

[cbauto]

fuark what a beast bro
ok m80

[SHOGUNOVDDRK]

maybe haha i'll see how it goes. Like how your eks going too btw, looks mint!
Do your thing man, that giggity yellow is in safe hands.
I'll just sit in the dark fapping...ohshi-

Hahahaha the chasers return, I really should just roll my guards and rock the bbs's one moar time + moar lows but I dunno.

haha shiiii, what's with the chasers Lloyd?
http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20141227_122310_zps48o4spr3.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20141227_122310_zps48o4spr3.jpg.html)

fuark what a beast bro


ok m80
Calm down bor.

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20141230_181552_zpsvb810gkz.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20141230_181552_zpsvb810gkz.jpg.html)

http://i1313.photobucket.com/albums/t548/DollyBockridge/Mobile%20Uploads/20150102_162641_zpsjq3h8kay.jpg (http://s1313.photobucket.com/user/DollyBockridge/media/Mobile%20Uploads/20150102_162641_zpsjq3h8kay.jpg.html)

[Vvvtec]

dont paint the buddy clubs

[Vvvtec]

sell me them wheels loid

[iwearmoccos]

One of my Advan RGs had a buckle, so am now running my Type-Cs.
.http://tapatalk.imageshack.com/v2/15/01/04/f63c29f8ef5577e4c74488bcf9e4e0a6.jpg

[nobbs]

Not sure when the last time I posted here was, but recent additions in this pic are mirrors, clear side markers, oem hood bra, Recaro drivers seat.

http://imageshack.com/a/img540/8707/HrzEWY.jpg

Also picked up a Nardi Classic wheel and mated it to a HKB boss kit.

http://imageshack.com/a/img538/870/hBpqj2.jpg

Took some pics with some friends right before Christmas - Cheers to J_Hui for the shots (more to come).

http://imageshack.com/a/img540/4200/UmSj0x.jpg

Aside from that I recently got some new tyres - Toyo Proxes 4 and Hanny's did my 240,000 service for me. Also picked up a long ram injen intake a while back.

[Vvvtec]

joocy

[grifty]

Went to the drags last night, this is the best time I could manage.

http://i59.tinypic.com/t7nxhd.jpg

[carayan]

damn did well for a b16

[dave_biscuits]

Replaced the rear trailing arm bushes today on my EK1.

Was a little nervous doing these (thinking it might turn into a long pain in the a** job), but can highly recommend the Schley 65100 bushing extractor. Got it off ebay, a little pricey getting it from the U.S, but made for a very fast and painless swap, surprisingly zero issues :)

[Spoon-Accord]

http://img.photobucket.com/albums/v216/spoon-accord/woot/EK9%20turbo/77304342-C3FF-4FC1-85EB-0F392AB4BB4F_zpsjdo4ohgc.jpg (http://smg.photobucket.com/user/spoon-accord/media/woot/EK9%20turbo/77304342-C3FF-4FC1-85EB-0F392AB4BB4F_zpsjdo4ohgc.jpg.html)
http://img.photobucket.com/albums/v216/spoon-accord/woot/EK9%20turbo/4CBFB02F-1036-4B03-BD8D-6D69C7A55BB6_zpscppq8j96.jpg (http://smg.photobucket.com/user/spoon-accord/media/woot/EK9%20turbo/4CBFB02F-1036-4B03-BD8D-6D69C7A55BB6_zpscppq8j96.jpg.html)
http://img.photobucket.com/albums/v216/spoon-accord/woot/EK9%20turbo/04C74712-498E-4782-AB84-A6C645E36AF9_zpsrlnm1phr.jpg (http://smg.photobucket.com/user/spoon-accord/media/woot/EK9%20turbo/04C74712-498E-4782-AB84-A6C645E36AF9_zpsrlnm1phr.jpg.html)

Went to work and my car changed color LOL

M5 Sepang bronze

[mattsrea]

fkn beast kenny! When does it all get put back together? :)

[Spoon-Accord]

Doing it now as we speak Matt!

[mattsrea]

Ohhhh damn midnight work on the car! The man! Can't wait to see complete assembled car!

[SHOGUNOVDDRK]

Dat midnight crew!

Kenny that colour is farkin awesome!!!

[dr1ftaX]

Damn that's a really nice colour! Good job dude.

[EKVTIR-T]

who painted it ?


great choice on colour too

[Tamagochi]

Nice colour man! can't wait for the final results :) What Wheels?

[Wadehh212]

http://tapatalk.imageshack.com/v2/15/01/12/dc39e155381ad1426def6a44308065f2.jpg

Someone give me an idea of what to do next?

[AusVTi-R]

http://tapatalk.imageshack.com/v2/15/01/12/dc39e155381ad1426def6a44308065f2.jpg

Someone give me an idea of what to do next?

Get your P's.



In all seriousness though, what info are you after....cosmetic or mechanical based?

[mattsrea]

1) lose the angel eye headlights, if you bought them to run HIDs 'safely' then i suggest retrofitting the headlights. Gives more of a stock look with a big eye ball in the middle. Looks alot better and HIDs will run alot better!
http://i59.tinypic.com/e6wpj5.jpg
and heres mine when i was running on retrofits
http://i61.tinypic.com/eq2khg.jpg
2) Get yourself a lip (type r or yeah anything you prefer)
3) Lower the car

other then that car looks mint!

[EKVTIR-T]

Someone give me an idea of what to do next?http://image.nengun.com/catalogue/1024x768/nengun-1920-01-spoon-sports_wiper_blade.png

[Wadehh212]

Yeah I've been planing to lower it and get a type r lip just looking for a pair of Coilovers that aren't out of my price range

[Wadehh212]

And also not sure where to get a lip from

[PHO]

Mattsrea is king of ek now m8

[mattsrea]

Mattsrea is king of ek now m8

nahh matee! just tryna help out =)

and OP, you can get lips 2nd hand or brand new from jdmyard or ebay if you want replica lips.

[dr1ftaX]

Installed Skunk2 Pro S Coilovers which i got from fellow member Andreascivic? on the daily today.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t34.0-12/10933310_10152502871510826_1268243310_n.jpg?oh=7ce 891bf6976a8e62c04e2681152db60&oe=54B70F28&__gda__=1421365125_380afe543145d23f43cadbc64cebf07 d

Couldn't help but test fit my mates BBS RS on for shits n gigz

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10913723_10152502871200826_1497731208_n.jpg?oh=b15 2443f87af0ac042f0ae97c0f0b55d&oe=54B74BF9&__gda__=1421295848_d359c45d76ec2183f2faa22c7a2ab05 2

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10885002_10153074456729703_378213568_n.jpg?oh=7a4b f9c29b7e6794aed0a97bfc78b098&oe=54B71C0E&__gda__=1421308218_c93aecd7bcd19d0bc2cb004f7c3f476 4

Almost exactly how i want it, just wished it had better bodywork :(

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/16503_10152502851960826_2572176185168183035_n.jpg? oh=3b1d753e0dcb710b7c86521fa594710e&oe=55211187&__gda__=1432635420_32ddf5770fe720c65ef27082d556f52 6

[tangk]

Installed Skunk2 Pro S Coilovers which i got from fellow member Andreascivic? on the daily today.

Couldn't help but test fit my mates BBS RS on for shits n gigz

D@ Sedan d0e, sweet car moite

[SHOGUNOVDDRK]

Ohhhh dat silver sedan, dr1ftaX is that an edm grill?
Car looks farkin siq moit!

[EKVTIR-T]

How come da weels is sticked out

[u mad?]

How come da weels is sticked out

get with the times mate, its stance

[Super-DA9]

How come da weels is sticked out

Accidentally bought wrong size of wheels m8

[dr1ftaX]

Yez, EUDM grille @SHOGUNOVDDRK. Stence lyf

Swapped over my custom number plates today aswell. What a difference!

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10906035_10152504268835826_1686792201602493870_n.j pg?oh=4a450ed9e1e62033c1a3e05aa7470d13&oe=55363B0F&__gda__=1428629850_57bd9ca1c66b4467b0200ab837340f9 0

Gotta address that door asap.

[mattsrea]

fk looks mint, and that daily height! How stiff is it?

[dr1ftaX]

fk looks mint, and that daily height! How stiff is it?

It's pretty soft and bouncy.. 8kg fronts and 6kg rears. Had 10kg springs on the front before, which I probably should've kept in.

Oh and thanks! It's far from mint though haha

[SHOGUNOVDDRK]

Yez, EUDM grille @SHOGUNOVDDRK. Stence lyf

Fkn knew it m80000, farkin siiiiiick lad.

It's pretty soft and bouncy.. 8kg fronts and 6kg rears. Had 10kg springs on the front before, which I probably should've kept in.

Oh and thanks! It's far from mint though haha
Are you rolling 14's with that height? You must love it.

[dr1ftaX]

Fkn knew it m80000, farkin siiiiiick lad.

Are you rolling 14's with that height? You must love it.

Ahaha, yeah byuddy 14's all day!

[grifty]

https://www.youtube.com/watch?v=wBWh3TB7QBY

[SHOGUNOVDDRK]

https://www.youtube.com/watch?v=wBWh3TB7QBY
Is very nice.

[namtaro]

found my oem ek9 muffler... anyone interested? no longer own a civic =(

[PHO]

How much nam?

[iwearmoccos]

http://tapatalk.imageshack.com/v2/15/01/25/65349da462390e917c1f658cc5026fb5.jpg

Received a PLM rail in the mail and installed my Cobra seat.

[mocchi]

fuark beast m8

[cbauto]

http://tapatalk.imageshack.com/v2/15/01/25/65349da462390e917c1f658cc5026fb5.jpg

Received a PLM rail in the mail and installed my Cobra seat.

What steering wheel is that?

[AusVTi-R]

What steering wheel is that?

looks like OMP

[iwearmoccos]

What steering wheel is that?

It's an RPM one from Revolution.
350mm diameter, 90mm dish.

[cbauto]

Fark, 90mm

[EKVTIR-T]

only freddy kruger can indicate

[SHOGUNOVDDRK]

only freddy kruger can indicate
Are you unaware?











http://i.ytimg.com/vi/xmiwwn3mYvQ/maxresdefault.jpg


How does the wheel feel?

[iwearmoccos]

I'm quite tall with big hands, indicating isn't as hard you you expect. Not daily driving it probably helps the situation also.
Wheel and seat setup feels really good, I needed to get the seat lower to be able to heal toe and fit in the car without head butting the roof while wearing a helmet. This alleviates all those issues.
Suede on the wheel is really nice, I'm impressed with the purchase. Half the price of Nardi etc etc as well

[AusVTi-R]

How tall are you? Srs question im 6'5"...

[iwearmoccos]

196cm

[AusVTi-R]

196cm

Yeah im about 194. I find the ek's quite accomodating...but can only heel and toe with the seat all the way back

[iwearmoccos]

Hatchbacks in general are surprisingly accommodating for tall guy, my last car was a hatch also and had more than enough room.

[AusVTi-R]

Hatchbacks in general are surprisingly accommodating for tall guy, my last car was a hatch also and had more than enough room.

also in the back if you know what im sayin'

[EKVTIR-T]

also in the back if you know what im sayin'for when you have a big load,right?

[AusVTi-R]

for when you have a big load,right?

Towing semi-trailers? yer sure.








sex

[Spoon-Accord]

Nice colour man! can't wait for the final results :) What Wheels?

Thanks for the positive feedback guys, really appreciate it
Color is Sepang bronze, body work was done over a weeks period, getting every single ripple,dents and imperfections out
Wheels are ssr sp1's, 16x8 +32 which are very rare and hard to come by

[genkitofu]

New wheels! 16" Buddyclubs, thoughts on wheel color or leave as is? I was thinking of painting it white (just 2pack paint not powdercoating)
http://i58.tinypic.com/1z6sk9d.jpg
http://i62.tinypic.com/2cxuo7o.jpg

Just wondering I always see a yellow em1 on princess hwy when I go to work always turns into Springvale road towards Springvale is this you? LOL I'm in the white s2000 If you are car looks good bro

[mattsrea]

Just wondering I always see a yellow em1 on princess hwy when I go to work always turns into Springvale road towards Springvale is this you? LOL I'm in the white s2000 If you are car looks good bro

Aye!!! Yeah hahaha! Thanks man! Your the guy in the white AP2 yeah? I saw your car again on kings way today! haha. Yours looks mint as well! Sounds good!
I normally finish work at 2 from sunshine so yeah. You live on the other side of Springvale area?

[EKVTIR-T]

white ap2? ballin!

[genkitofu]

Aye!!! Yeah hahaha! Thanks man! Your the guy in the white AP2 yeah? I saw your car again on kings way today! haha. Yours looks mint as well! Sounds good!
I normally finish work at 2 from sunshine so yeah. You live on the other side of Springvale area?

Haha no white ap2 here boys just a ap1 with the conversion done cheers bro! yellow looks Micky mouse man yeah I'm in keysy I leave for work around 2:30 so we always drive past each other haha

[mattsrea]

Haha no white ap2 here boys just a ap1 with the conversion done cheers bro! yellow looks Micky mouse man yeah I'm in keysy I leave for work around 2:30 so we always drive past each other haha

ahhh ap2 conversion? Nicee! I only seen the front never had the chance to see the back lol. Back still AP1? Ohh so your going to work! lol damn!

[genkitofu]

ahhh ap2 conversion? Nicee! I only seen the front never had the chance to see the back lol. Back still AP1? Ohh so your going to work! lol damn!

Haha got the ap2 tail lights also missing the rear bar trying to source a Jdm rear bar atm but been a little lazy haha still need to get my guards done getting sick of running the stockies. Yeah afternoon shift lmao traffic towards city isn't as bad as traffic back to the area I guess

[mattsrea]

Haha got the ap2 tail lights also missing the rear bar trying to source a Jdm rear bar atm but been a little lazy haha still need to get my guards done getting sick of running the stockies. Yeah afternoon shift lmao traffic towards city isn't as bad as traffic back to the area I guess

Ahh noice noice! Well look forward to running into you more haha

[mugen_ctr]

http://s28.postimg.org/y63i5rzod/image.jpg

White rims on most cars is a winner in my books :D

Go white rims!!!! Yellow car + white rims

[mocchi]

fuark what a beast

[SHOGUNOVDDRK]

Deeeem teeeteeeees!!!!

[mattsrea]

hahaha yeah was thinking white too! But need to fix up all the gutters! :( what do you guys think will be good for bogging up gutters? Im thinking just body filler as its easier to sand off and all but i seen some do metal filler :\

[grifty]

do a metal filler, will last longer & more durable

[mattsrea]

do a metal filler, will last longer & more durable

Have you tried before? I'm just worried about not being able to sand it back to an even layer :\

[SHOGUNOVDDRK]

I've used metal filler before.

You'll be able to use it just like normal bog.

[mattsrea]

I've used metal filler before.

You'll be able to use it just like normal bog.

Is the sanding process more harder then normal bog or?

[Spoon-Accord]

http://img.photobucket.com/albums/v216/spoon-accord/accord/765B541E-ACC0-4C20-A0DC-5C96134E9143_zps9cxqjoa6.jpg (http://smg.photobucket.com/user/spoon-accord/media/accord/765B541E-ACC0-4C20-A0DC-5C96134E9143_zps9cxqjoa6.jpg.html)

I used metal filler aswell on my valve cover, after I shaved it, it had holes where the lettering was, I applied the metal filler layer after layer, sanded it down and then added normal body filler on top to cover all the little pin holes

Came up awesome!

[Vvvtec]

joocy good work

[RenzokukenJ]

Enough

[mocchi]

lmaoo

[u mad?]

Enough

http://www.ozhonda.com/forum/customavatars/avatar37219_27.gif

lmaooo what in the fuk

[RenzokukenJ]

http://www.ozhonda.com/forum/customavatars/avatar37219_27.gif

lmaooo what in the fuk
Grouce

[mocchi]

http://www.ozhonda.com/forum/customavatars/avatar37219_27.gif

lmaooo what in the fuk

hahahahahah fuking lol

s2 ozhonda

[RenzokukenJ]

Fukin drove my ek off a cliff today

Kunt of a thing wouldn't drive straight so just took the plates off (didn't have vin because ek9 rebirth eh heeeeee) and let it roll down a hill off a cliff

[u mad?]

woah man are you ok?

i long to know if u r ok

r u ok man

r u k











































ruk

[RenzokukenJ]

woah man are you ok?

i long to know if u r ok

r u ok man

r u k











































ruk

Yh man I am ok

Dw bruz I am ok

I'm ok mun

I'm k


































































Imk

[IEVAQ8]

getting closer to being ready for sunday...


http://i287.photobucket.com/albums/ll147/ievaq8/ek%20civic%20build/20150206_194655_zpspmgbmsxf.jpg

[SHOGUNOVDDRK]

747 preparing for take off.








Looks good but heres hoping it performs well on Funday for you

[mocchi]

lca looks upside down

http://www.ozhonda.com/forum/customavatars/avatar30053_101.gif

[IEVAQ8]

https://www.youtube.com/watch?v=KIT07AgSUkM&feature=player_embedded

[IEVAQ8]

lca looks upside down

http://www.ozhonda.com/forum/customavatars/avatar30053_101.gif

wat makes u say that???

[SHOGUNOVDDRK]

Tetanus hood conversion is almost complete;

http://i426.photobucket.com/albums/pp341/SHOGUNOVDDRK1/20150410_125410.jpg (http://s426.photobucket.com/user/SHOGUNOVDDRK1/media/20150410_125410.jpg.html)

[u mad?]

oh lloyd...

[carayan]

27951

I put some numbers and lines on a graph

[Vvvtec]

http://www.ozhonda.com/forum/attachment.php?attachmentid=27951&d=1428746479

[RenzokukenJ]

http://www.ozhonda.com/forum/attachment.php?attachmentid=27951&d=1428746479

[carayan]

man fuk this new image attachment system

[u mad?]

man fuk this new image attachment system

yh kunts fuked

[kokopuffs]

Today, I managed to rip the rearview mirror off... the whole assembly

[AusVTi-R]

Today, I managed to rip the rearview mirror off... the whole assembly

No looking back now man.

[Howardm]

I have been doing this and this

[Hondarally]

I have been doing this and this
Sweet! What are you doing with the A/C gear? Interested in selling? I need compressor, condenser and lines (have the evaporator and both lines going to evaporator, but need everything else)

[kokopuffs]

No looking back now man.


ahahahahah ya man :thumbsup:

[Vvvtec]

No looking back now man.
I cant see what you did there

[kokopuffs]

I cant see what you did there

Thats cause his post is behind yours

[Howardm]

sent you a PM Hondarally

[MAZ.827]

27978

heyhey