***Official What did you do to your EK today***

[DNYALL]

70 in 1st :/

[Riced_Civic]

yeah WTF 70 in 1st gear.

must have really long 1st gear.

[SuperJDM.]

Washed my ek and took some photos ready to put it up for sale.....but kind of need a PQ point to post on for sale forum....................hint hint :)

you deserve that red box

[1996_EK_Civic]

i go 50 in 1st, but then again i have a D series

[blastnpast]

Finally picked up twin loop exhaust and chrome tow hook :D

[Mikecivic78]

I hit 70k/h in 1st. That's what I did to my EK today. Normal day really...


this was a real drunken rant last nite. i don't even remember typing it. disregard it.

It hits the limiter at early 60s in 1st if i remember correct. Stock b16a box.

[Temp3st]

I hit 70k/h in 1st. That's what I did to my EK today. Normal day really...

BTW, nice drop Temp3St. It looks gangsta. Well done.

Cheers man! My mate took some photos on his iPhail:

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs020.snc6/167051_1401020764655_1806413371_768790_5364228_n.j pg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs900.ash1/180809_1401021204666_1806413371_768791_4263594_n.j pg

[1996_EK_Civic]

I've had my civic for one year now :D

[mugen_ctr]

Cut an polished the car, looks almost new, if it werent for all the rock chips lol

[sangyz]

did it yourself?

[Alvis]

lowering springs arrived today :)

http://i1132.photobucket.com/albums/m579/apalmucci/P1040388edit.jpg

[57U-00]

lowering springs arrived today :)

http://i1132.photobucket.com/albums/m579/apalmucci/P1040388edit.jpg

nice, how much that set ya back bro?

[blastnpast]

Installed my ek9 grill along with chrome tow hook :( awaiting my f7 subframe bar ......

[Alvis]

nice, how much that set ya back bro?

Got them from New Zealand performance website - really recommend them, excellent customer service and quick delivery :)
Good exchange rate too vs kiwi dollar.

http://www.fortyone.co.nz/

[DNYALL]

Nice mate, quality springs right there!! :thumbsup:

Today I took off the backing plate from my ITB's. The backing plate that is part of the ITB cover that I used to run. so now my ITB's look a bit better, bit more exposed :) haha also cleaned the gunk from the throttles.

Also my tire bag things arrived so I wrapped up my Hoosiers for some safe storage :)

[EK1.6LCIV]

love seeing pics of the black beast ^^^ :)

basically got a hold of all of the hard race bushings to replace the old items with now :) Im soo glad they make front lca as Honda only sells them as a set of the two pieces at $3xx a piece...

and beat the crap out of the front brake stone guard to reshape it, might add two of them to the shopping list

[[daan]]

Cleaned it out hardcore- vacuumed the entire interior, and went over everything with an MF mitt, car looks and feels brand new now!!
ready for inspections :D almost dont want to get rid of it


http://farm6.static.flickr.com/5211/5384421294_05592b0007.jpg

[57U-00]

Got my JDM stickers from eBay on Tuesday. Sticker wrapping the roof and putting the odd one here and there on the panels to hide the hail damage from 2 months ago. The egg is gonna look hell sexy again. Saving up for a new bonnet painted matte black and low king springs. I've painted the steelies matte black so gonna be Rollin ghetto style from now on. Tis cheaper.

[Mullensxxx]

lol sounds like a good way to wreck an EG, p.s its the EK thread ;)

i finished putting my 282mm set up on my EK

[DNYALL]

Nice, Brakes are cool :thumbsup:

[57U-00]

lol sounds like a good way to wreck an EG, p.s its the EK thread ;)

i finished putting my 282mm set up on my EK

yeah, there's no EG thread... and unfortunately the car isn't worth fixing so hiding the hail is the only option... its turned out alright... the sun today has heated up the metal and popped most of them out... they'll be gone in no time... bonnet not so lucky...

[blastnpast]

yeah, there's no EG thread... and unfortunately the car isn't worth fixing so hiding the hail is the only option... its turned out alright... the sun today has heated up the metal and popped most of them out... they'll be gone in no time... bonnet not so lucky...


... Make an eg thread lol?

[SRVTIR]

Removed my angel eyes and installed oem headlights. check!
Painted some brackets to clean up the engine bay. check!
Painted the rear of the fog light bezel black to make it look cleaner.. :D check!

http://i621.photobucket.com/albums/tt293/ndu19e/IMG_0098.jpg

[blastnpast]

Removed my angel eyes and installed oem headlights. check!
Painted some brackets to clean up the engine bay. check!
Painted the rear of the fog light bezel black to make it look cleaner.. :D check!

If anyone wants second hand angel eyes with 8000K HID's, lemme know haha!

http://i621.photobucket.com/albums/tt293/ndu19e/IMG_0098.jpg

Hehehe very wise choice!! OEM FTW


You might want to edit the selling part lol mods might take action bro :( it happened to me 5 points towards banning for selling when not authorized to do so

[SRVTIR]

Oh sorry mods! Bugger! I didn't mean that.. :D meant as a jke!

Next on the list is rocker cover - red shrink wrapped! :D

[Alvis]

yeah, there's no EG thread... and unfortunately the car isn't worth fixing so hiding the hail is the only option... its turned out alright... the sun today has heated up the metal and popped most of them out... they'll be gone in no time... bonnet not so lucky...

Sorry mate given I created the thread I tried emailing the administrators several times to change the name to the EG/EK thread - but I've never had any reply... Come on you guys who are moderators - can we get this happening please?


The survey results speak for themselves.

[57U-00]

lol... all good, i started one...

don't matter... haters are gonna hate... nothin personal against u...

i doubt anyone will even bother with mine tho... so it looks like yas are still stuck with me lol

[markoJEK1]

http://img522.imageshack.us/img522/7166/img0309ca.jpg

[SRVTIR]

dba? rda?

[markoJEK1]

DBA4000 Wiper slot with QFM A1RM pads

[SRVTIR]

nooiiiice!

2nite modding my brake lights with second brake light

[Riced_Civic]

took out my bonnet latch and saved 2 grams in weight

[blastnpast]

nooiiiice!

2nite modding my brake lights with second brake light

I think its referred to as Ek9 wanna be lol

[SRVTIR]

lol whatever trevor! :P

[DNYALL]

took out my bonnet latch and saved 2 grams in weight

Weigh it properly and tell me how much it actually weighs!!

[SuperJDM.]

i wonder if someone has actually tried losing weight, so they can preform better around track lol. light weight y0

[Raztaz]

replica lip off, OEM lip on

[Riced_Civic]

Weigh it properly and tell me how much it actually weighs!!

the latch on its own was about 1 to 2kgs. including the line and the in-cabin latch it only added like 500grams.

so all up 1.5 to 2.5kg if excess weight

[mugen_ctr]

i wonder if someone has actually tried losing weight, so they can preform better around track lol. light weight y0

hahahahaha, naaahhh this australia yo, not japan where everyone is short an skinny :P

[SuperJDM.]

hahahahaha, naaahhh this australia yo, not japan where everyone is short an skinny :P

explains why in japan cars go faster

[[daan]]

Took a deposit on my EJ8 , organising an RWC and then its gone!!

gonna miss it, but time to get something fresh :D

[Alvis]

http://img522.imageshack.us/img522/7166/img0309ca.jpg

they really look the goods mate - I gotta be gettin me a pair of those! ;)

[Alvis]

gave it the quick polish in between polishes :)

[SuperJDM.]

showed mine some love and gave it a massive wash.

http://img411.imageshack.us/img411/5104/shinyq.png

[SRVTIR]

Installed H4 Hi/Low Beam HID's 6000K wooo! :D

[DNYALL]

the latch on its own was about 1 to 2kgs. including the line and the in-cabin latch it only added like 500grams.

so all up 1.5 to 2.5kg if excess weight

Thats actually more than i expected :)

[UkuleleGod]

http://i38.photobucket.com/albums/e118/gothecow212/Edit.jpg

Gave my car a clean :D

[blastnpast]

Took all black parts off for there Journey into the spray booth for colour coding :)

[SRVTIR]

got the civic serviced :)

[mugen_ctr]

Me to, i serviced my car, dropped motor an gearbox oil, gear changes feel so much better now

[EK1.6LCIV]

off recovering so I found a can and went to work, looks very good :)

http://i224.photobucket.com/albums/dd127/kwelrap/168313_497497148411_669193411_6328339_6327043_n.jp g

http://i224.photobucket.com/albums/dd127/kwelrap/166803_497506118411_669193411_6328526_4268959_n.jp g

http://i224.photobucket.com/albums/dd127/kwelrap/167691_497542643411_669193411_6329083_1274145_n.jp g

[vti_boi]

let my girlfriend drive my car after she just got her ps.....
how does she repay me by putting it through fence
FML :(

[waix]

drew on my spare fender, no job = nothin but tym









http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/f8c3f8ef.jpg

http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/c5be82bb.jpg

[mugen_ctr]

let my girlfriend drive my car after she just got her ps.....
how does she repay me by putting it through fence
FML :(

well if its anything to go by, woman in general cant drive very good, as one my chick friends backed into my one few days ago lol

[NDU19E]

women.. what can ya do matey.. :)

[NDU19E]

got the civic serviced :)

You didnt service it.. i did lol

[SRVTIR]

Yeah ok.. but I helped... lol

Just finished cleaning up the boot. I dont think it was ever cleaned before under the spare wheel ... yerrch!

[SuperJDM.]

drew on my spare fender, no job = nothin but tym









http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/f8c3f8ef.jpg

http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/c5be82bb.jpg

thats SICK!

[blastnpast]

http://184.72.239.143/mu/3a68a3a0-1095-a783.jpg


Very very nice!

[vti_boi]

looked over my car today....

some dumb f#*K WIT KEYED MY BOOT
just another thing on the list

why do bad things happen to good people :(

[DNYALL]

drew on my spare fender, no job = nothin but tym

http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/c5be82bb.jpg

That looks awesome man. Nice work :thumbsup:

Does that say 'EAT SLEEP SHIT' haha

[quangsuke]

drew on my spare fender, no job = nothin but tym









http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/f8c3f8ef.jpg

http://i769.photobucket.com/albums/xx334/JerryBuiltThis/Doms%20EK%20Build%202010%20and%20other%20EK/c5be82bb.jpg

that is awesome man !!!

[quangsuke]

by the way waix, are u missing a wheel nut off ur front driver side wheel

[Buddy]

Sold her this arvo :(
http://img696.imageshack.us/img696/7968/civicedit.jpg

[UkuleleGod]

Sold her this arvo :(
http://img696.imageshack.us/img696/7968/civicedit.jpg

Beautiful looking car.

Question, what did you think of the foggies? I'm just trying to figure out if they are worth the cash.

[Buddy]

Bought the foggies mainly for the looks, although when I did actually use them in the rain/fog I found them to be very useful, no regrets buying them.

[blastnpast]

Ripped my front and rear lip off my bars lol!

Snapped them and luckily I was at a panel shop who said hey no problem well fix them :D

[Alvis]

http://i38.photobucket.com/albums/e118/gothecow212/Edit.jpg

Gave my car a clean :D

Nice looking EK4 - looks very clean to me :)

Hope you try to keep it OEM - any future plans?

[UkuleleGod]

Nice looking EK4 - looks very clean to me :)

Hope you try to keep it OEM - any future plans?

Thanks - Its only a CXI though :(

I have been slowly upgrading it with all OEM parts (apart from the stereo and such).
The next things for me will be some Amber foggies, JDM visors and an EK9 shift boot. That being said, if any other nice EK9 goodies pop up, Ill see what happens.

[blastnpast]

Thanks - Its only a CXI though :(

I have been slowly upgrading it with all OEM parts (apart from the stereo and such).
The next things for me will be some Amber foggies, JDM visors and an EK9 shift boot. That being said, if any other nice EK9 goodies pop up, Ill see what happens.

I got some jdm visors pm me they will suit civic ek hatch or em1 coupe :) bro

[Alvis]

Thanks - Its only a CXI though :(

I have been slowly upgrading it with all OEM parts (apart from the stereo and such).
The next things for me will be some Amber foggies, JDM visors and an EK9 shift boot. That being said, if any other nice EK9 goodies pop up, Ill see what happens.

Sounds like you plan your mod parts with a bit of thought - good to see. Look forward to maybe even seeing a build thread :)

EK9 rear lip and wing would really look the goods - keep up the good work!

[UkuleleGod]

Sounds like you plan your mod parts with a bit of thought - good to see. Look forward to maybe even seeing a build thread :)

EK9 rear lip and wing would really look the goods - keep up the good work!

Cheers. Yeah, with this car it has pretty much been. Save up money, research and then wait a bit. So far I am pretty happy with the result.
I would make a build thread, but I am not sure how interested people would be. Progress is pretty slow on this car, and all the mods are just subtle. Haha.

I've been thinking of doing an EK9 rear lip in the same ABS plastic as the rest of the lips around the car. But I am not sure as to how it would look. At the moment it is all finished by the mud flaps.

[mugen_ctr]

finally source dc2 rear brakes with abs lines an plugs, cant wait till chuck em in.... such a relief now lol, one less thing to buy

[[daan]]

Sold my EJ8 ! new owner just drove away - gonna miss it...

http://farm4.static.flickr.com/3377/4629065640_bc1b62e2f0.jpg

[DNYALL]

hmm poor choice man. EJ8 looked good.

Today/night I made a build thread for my car. Only took 5 hours :/ I am blind from staring at this laptop for so long...

[SuperJDM.]

hmm poor choice man. EM1 is win.

Today/night I made a build thread for my car. Only took 5 hours :/ I am blind from staring at this laptop for so long...

it was an Ej8 :P

very clean though man

[Alvis]

Save up money, research and then wait a bit.

Ha, my thinking exactly... best way to do it if you want to do it right the first time :)


So far I am pretty happy with the result. I would make a build thread, but I am not sure how interested people would be. Progress is pretty slow on this car, and all the mods are just subtle.

Don't worry man, my build has been going for more than 2 years! I'm so frickin' slow in my old age lol - but i don't like doing all mods in one or two months, no fun to me, would just feel like a rush job.

But I think the guys on the forum would like to see another clean EK hatch build thread! And get some advice from them as well - they've always helped me out :)


I've been thinking of doing an EK9 rear lip in the same ABS plastic as the rest of the lips around the car. But I am not sure as to how it would look. At the moment it is all finished by the mud flaps.

As everyone knows, my suggestion is OEM all the way or quality Japanese parts> Yes, it costs a bit more, but lasts longer, looks better, looks cleaner and you can always part the car out one day and make most of your money back - so in the long run it's really much the muchness... you just pay more to start with.

Post a link if you decide on a build thread!

[Riced_Civic]

i started the car for the 1st time since November and bought some skunk2 Stg1 cams and cam gear for my build

[kriZy]

Hmm feel like doing a build thread to keep track of my car and diary. Had an ek4 before and got my fulls and went for a type x. I'm back to ek4 again and will be sticking with oem and quality parts. No fakies!

Back on topic. Installed brand spanking new coilovers.http://184.72.239.143/mu/dcf47c43-f054-6f64.jpg
http://184.72.239.143/mu/dcf47c43-f07c-b76e.jpg
http://184.72.239.143/mu/dcf47c43-f0a3-b00b.jpg

Finished up with a refreshing brunch meal
http://184.72.239.143/mu/dcf47c43-f0c4-8b03.jpg

Today is 40 degrees and I woke up at 5am to get this done before the heat kicked in

[SuperJDM.]

rofl kirzyyyyyy you are the man!

[Temp3st]

I have a set of those chopsticks yo :P

[UkuleleGod]

Ha, my thinking exactly... best way to do it if you want to do it right the first time :)



Don't worry man, my build has been going for more than 2 years! I'm so frickin' slow in my old age lol - but i don't like doing all mods in one or two months, no fun to me, would just feel like a rush job.

But I think the guys on the forum would like to see another clean EK hatch build thread! And get some advice from them as well - they've always helped me out :)



As everyone knows, my suggestion is OEM all the way or quality Japanese parts> Yes, it costs a bit more, but lasts longer, looks better, looks cleaner and you can always part the car out one day and make most of your money back - so in the long run it's really much the muchness... you just pay more to start with.

Post a link if you decide on a build thread!

Yeah, Doing it slowly has served me pretty well so far. I might have to get a thread together, I'll have to check out what photos I have lying around from the process of building everything up. It would be good to log some of the maintainance and stuff I do to the car. As far as the rear lip goes, there is no question about the fact that I will be going OEM, I am just wondering how it would look if i continue the lip in black around the back. At the moment, the side skirts are finished pretty well by the mud flaps, so I am not sure. I am all for OEM.

EDIT: Put together a small thread on the stuff I have done to the car, it is Here (http://www.ozhonda.com/forum/showthread.php?145520-My-EK-Cxi&p=2946458#post2946458)

[kriZy]

I have a set of those chopsticks yo :P

those chopsticks are cool!

anyway i did some more things to my EK today! - pretty much worked on the rear of the car and abit of the front.

1. Rear wiper delete and replaced with OEM Rubber Grommet
2. Removed rear wing brake lights and replaced with all new lights - because 1 burnt out so i decided to replace all of them and never do it again. btw they were so cheap 50c each!
3. Removed facelifted tail lights and replaced with OEM EK9 tail lights - also replaced all the globes/reverse lights.
4. Cleaned up corrosion of battery terminals
5. New Supercharge Gold battery!
6. Flushed radiator coolant and refilled
7. Installed new OEM ignition coil - car runs smoother now!
8. Replaced wiper blades with OEM - best thing ever!

did heaps today!

[OBS355]

Fitted front & rear Buddy Club camber kits & while I was in there (front driver wheel well), took out the stock air filter baffle box thing & made up a cold air intake for it. Now need to take it to my local wheel & tyre place to get an alignment done tomorrow.

[kriZy]

Forgot to add, replaced radiator cap as my current one was deteriorating and falling in pieces.

[tylerjames]

Riced the civic this weekend.

put LED's under the door handles of my 96.
have to admit, it looks pretty sick.

and with all the cars driving around with aftermarket lights at the moment,
this is one of the only mod's I haven't seen yet. (I know they would exsist on some model somewhere)

will post pics soon.

[mugen_ctr]

put some vtir seats, facelift model, so its got the much better pattern, makes a HUGE IMPROVEMENT! for the price instead of buying replicas or Recaros for that matter, well worth the investment :D

[3iuuop]

just finished putting audi style l.e.d lights under my head lights. cant wait for it to get dark

[1996_EK_Civic]

painting my 17's :) there sanded back and soon to give them a wash then spray them in gloss white!

[Temp3st]

Got my rust cleaned up underneath where the windscreen sits, new windscreen mouldings on and door moulds ftw! Also got my cupholders in, big big thanks to Trav! (egSi)

[blastnpast]

Got the f7 subframe brace along with blox LCA installed :)

Installed genuine CTR red carpet

Got the fog lights installed

See my build thread for pics

[Riced_Civic]

my supplier said hell swap over my tuner series stage 1 cam for racing series stage 2 for same price.

i agreed and dropped of the EK to the mechanic to get the B20 swap on the way

[EK1.6LCIV]

new front oem Honda wheel bearing, oh what a difference :) nearly all bushes installed

& got the front bumper painted & lip repaired and painted with a very nice final buff :)

[Raztaz]

how much did painting / repairing the front bar cost?

[1996_EK_Civic]

finished repainting my wheels :) will upload pics soon ;)

[1996_EK_Civic]

before,
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs272.snc6/180061_1722914204877_1599022534_1608960_888527_n.j pg

after,
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs309.snc6/181785_1722911084799_1599022534_1608951_153536_n.j pg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs895.ash1/180380_1722911884819_1599022534_1608955_7134252_n. jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/168767_1722911284804_1599022534_1608953_7874815_n. jpg

[EK1.6LCIV]

how much did painting / repairing the front bar cost?

removing the stone chips, materials, labour, to do just the bar is 200 normally

the lip had to be prepped a fair bit in the corner where it tore off

[mugen_ctr]

spent 8 hours tryna do my rear brake conversion, so far, im bouts half way, FML... the diy looks easy, i guess they missed out on about another 15 steps!!!! or so lol

[Alvis]

spent 8 hours tryna do my rear brake conversion, so far, im bouts half way, FML... the diy looks easy, i guess they missed out on about another 15 steps!!!! or so lol

HA, mate you're still going on this lol - wow you're one determined person! Keep it up!

[mugen_ctr]

HA, mate you're still going on this lol - wow you're one determined person! Keep it up!

haha, cheers man, its quite a leaning curve, but once its done, hopefully there aint no drama with it, especially with the abs system

[Alvis]

while not today, it was on the weekend that my creaking clutch pedal was back again (as the clutch pedal rises and engages): http://www.youtube.com/watch?v=bxn3iAXH00k

It started to creak after about 80km into the week when the weather was steaming hot, especially here in NSW on Saturday. On Sunday, when we had the cool change... it was as quiet as a mouse...

[mugen_ctr]

while not today, it was on the weekend that my creaking clutch pedal was back again (as the clutch pedal rises and engages): http://www.youtube.com/watch?v=bxn3iAXH00k

It started to creak after about 80km into the week when the weather was steaming hot, especially here in NSW on Saturday. On Sunday, when we had the cool change... it was as quiet as a mouse...

prbs moisture in the air, maybe?

An oh, made a interesting find, D16y8 have knock sensor, who knew ay lol

[SRVTIR]

So I took my misses civic gli to a job. This [deleted] guy calls me and asks to see the car. Full knowing the price im after. I have it advertised for 7 grand. Luckily we were in the same area so I decided to meet with him. He looks over the car, starts to point out things wrong with it. Telling me that his brother just bought another civic with same kms and "prelude" rims... That the fujita intake i have is a defect and that he will get done for it... He then offers me 5 grand! 2 grand under what im asking for... What an insult! I swear some people dont have any manners! So un-australian!

On a good note, i got Hi/Low Beam HID's installed! YAY! :D lol

[blastnpast]

@SRV your a funny guy and welcome to the world of fun and games when it comes to selling cars :) get ready for loads of low balling bitches

[SRVTIR]

I swear I felt like bopping him in the head! arghhh! wasted my time! lol

[Lbarbz]

Installed my Tein Super Street Coils

[mugen_ctr]

2 days later, finally fitted the rear brakes, ahahahahha, just gotta bleed the system, an shall be done.... i was gonna do a write up an diy of it, but honestly, takes to much time to do it, an 2ndly.....

SOOO many head fu*ks with this conversion, especially the master cylinder.... ARGH!!!!!

[Alvis]

You did it! LOL - you could of had a build thread just on your rear brake conversion haha ;)

Good work mate

[blastnpast]

Nice on the brake conversion!

And YEWWWWW nice choice on the suspension (tein sure make quality parts)

[DNYALL]

2 days later, finally fitted the rear brakes, ahahahahha, just gotta bleed the system, an shall be done.... i was gonna do a write up an diy of it, but honestly, takes to much time to do it, an 2ndly.....

SOOO many head fu*ks with this conversion, especially the master cylinder.... ARGH!!!!!

Nice work, you must feel very satisfied that you did it yourself and its all finished :thumbsup:

[mugen_ctr]

satisfied a little bit, more so agro in the fact it took so long lol

theres a diy on d-series on the rear disc conversion, but they missed out on few of steps, like having to take off the heat shield, how to remove master cylinder an all...but more so the great struggles in getting the stuff back on.... an the amount of dirt getting in to ur eyes while under the car! i never wanna go through this ordeal ever again, once in a lift time is good enough lol

i think the right tire has too much positive camber now, :S time for wheel alignment next week

[Raztaz]

going shopping at honda wreck now

[SuperJDM.]

owned mrwillz for exactly a year now :)

[mugen_ctr]

owned mrwillz for exactly a year now :)

u shouldnt say that, u should say, "my car for a year" lol, sounds like he still owns the car n not you

[SuperJDM.]

u shouldnt say that, u should say, "my car for a year" lol, sounds like he still owns the car n not you

haha nah my EM1 will always be known as mrwillz

[MRGRIM]

just a little bit of work.........
function7 lca's
function7 brace
function7 rear sway adj ball links
hardrace toe adjusters
hardrace cambers
skunk2 pro front cambers
OEM EK9 front + rear sways
EK4 rear disc conversion + slotted rotors + endless pads
integra GRIM RACING customised front rotors + calipers + greenstuff pads
upgraded booster + master cyl
stainless braid brake lines
new poly bushes through out
custom made GRIM Racing three point front tower brace..rear being designed
clean and reset tannabe coilovers

now to align it

[EK1.6LCIV]

pics of GRIM Racing products :)


I just waxed mine after a wash as it was covered in finger prints from various mechanics/panelbeaters

[Alvis]

just a little bit of work.........
function7 lca's
function7 brace
function7 rear sway adj ball links
hardrace toe adjusters
hardrace cambers
skunk2 pro front cambers
OEM EK9 front + rear sways
EK4 rear disc conversion + slotted rotors + endless pads
integra GRIM RACING customised front rotors + calipers + greenstuff pads
upgraded booster + master cyl
stainless braid brake lines
new poly bushes through out
custom made GRIM Racing three point front tower brace..rear being designed
clean and reset tannabe coilovers

now to align it

Wow. You been busy huh. Nice work :)

[DNYALL]

just a little bit of work.........
function7 lca's
function7 brace
function7 rear sway adj ball links
hardrace toe adjusters
hardrace cambers
skunk2 pro front cambers
OEM EK9 front + rear sways
EK4 rear disc conversion + slotted rotors + endless pads
integra GRIM RACING customised front rotors + calipers + greenstuff pads
upgraded booster + master cyl
stainless braid brake lines
new poly bushes through out
custom made GRIM Racing three point front tower brace..rear being designed
clean and reset tannabe coilovers

now to align it

Geez, someone is straight out ballin!! picsordidn'thappen!!

[MRGRIM]

pics will be up soon in a new build thread ..as soon as i get the rest done and a day off to take pics

[3KNST9]

got some new rims for my car WORK RSB'S =D upgraded from ek4 to these 17800

[waix]

got some new rims for my car WORK RSB'S =D upgraded from ek4 to these 17800

i like this (y)

[DNYALL]

pics will be up soon in a new build thread ..as soon as i get the rest done and a day off to take pics

Looking forward to it :thumbsup:

[3KNST9]

ahaha thanks man
i like this (y)

[blastnpast]

Got my twin loop installed yesterday and added some stickers along with taking
Some
Snaps of my ride :D looks mint nice and clean

[mugen_ctr]

dropped the car off at the panel beater, no car for a week :(

[blastnpast]

dropped the car off at the panel beater, no car for a week :(

Sucks what u getting done? What's the costs lol

[mugen_ctr]

Sucks what u getting done? What's the costs lol

just getting the bumper repaired an resprayed, but i aint paying a cent the other owner who backed into agreed to pay it lol, but does suck with no car, an having to ask parents to borrow there car

[Alvis]

Got my twin loop installed yesterday...

Nice, you'd be loving that. Maybe you can upload a vid so we can see and hear this puppy pur??? ;)

[blastnpast]

Nice, you'd be loving that. Maybe you can upload a vid so we can see and hear this puppy pur??? ;)

No videos until I get the exhaust from the headers down modified :) but hey some photos from my build thread

http://184.72.239.143/mu/01286762-1b0b-0da4.jpg

[Alvis]

... holding out on us ehhh? Ha lol jks jks - looks good!

Like the tag on the side too! What is that writing on there?

[blastnpast]

... holding out on us ehhh? Ha lol jks jks - looks good!

Like the tag on the side too! What is that writing on there?

Yoshimura cyclone exhaust system lol (Japanese)

[EK1.6LCIV]

hardrace lca & rear camber kit not much left til all of it goes in :)

loving the rear end of your car Mark :D

[SuperJDM.]

i dont get what you done lol? did you just get a random badge and weld it onto the muffler? or?

[blastnpast]

HEHE thanks ek1.6 all thanks to some amazing LCA lol and the badge actually was sent to me from a seller in japan :) it is a stick on (temporary) aluminum exhaust badge :)

It looks even meaner with my new C/F Spoon rep wing!! And he'll it's all legal

http://184.72.239.143/mu/31b69cb5-0945-a430.jpg

http://184.72.239.143/mu/31b69cb5-09be-6f2a.jpg

[DNYALL]

No videos until I get the exhaust from the headers down modified :) but hey some photos from my build thread

http://184.72.239.143/mu/01286762-1b0b-0da4.jpg

Looks sik :thumbsup: link me to your build thread, I can't seem to find it :/

[blastnpast]

Looks sik :thumbsup: link me to your build thread, I can't seem to find it :/

It's in the civic 2000/Below section or search silver ek1 build thread lol

[EK1.6LCIV]

http://i224.photobucket.com/albums/dd127/kwelrap/171455_10150092507403412_669193411_6440759_4993494 _o-1.jpg

start importing these Yonas, hard race ek rear lca, very awesome fitment... :)

http://i224.photobucket.com/albums/dd127/kwelrap/172084_10150092723433412_669193411_6442363_759451_ o.jpg

thanks Yonas awesome product :)

[mugen_ctr]

got a my car back today, they resprayed the whole bumper, looks new, all the stone chips gone :D

now if only the rest of the panels was in the same condition lol

[Alvis]

lol - trucks are a killa for stone chips, just don't stay too close to the car in front (ole 3 second rule) and you should be fine :)

... at least the stones didn't hit and crack your windscreen

[mugen_ctr]

yay, got my headers from my mate free of charge... the egay N1 headers... chucked it in, sounds sweet on WOT :D

Only slight side effect from it is that its running a tad rich... might need to invest a Apex AFC soon

[DNYALL]

want to work on it but there is a crazy mosquito plague at our place at the moment. makes going outside a bit shit... as well as the garage... stupid crap massive amounts of rain.

[Riced_Civic]

yay, got my headers from my mate free of charge... the egay N1 headers... chucked it in, sounds sweet on WOT :D

Only slight side effect from it is that its running a tad rich... might need to invest a Apex AFC soon

how would it run rich is it helps let it breath more, do u mean more lean.

[mugen_ctr]

how would it run rich is it helps let it breath more, do u mean more lean.

more rich, cause im gettin slighty crap milage, drove it all day, but a ecu reset should hopefully do the trick....

Oh btw, do i need to do a dyno tune if i do go for a apexi afc? still noob at N/A tuning LOL

And i never noticed how heavy the cast manifolds are!!!

[Alvis]

came across this website with cheap 2nd hand EK parts

http://www.japperformanceparts.co.uk/part_list.asp?Make=Honda&Category=

[grifty]

is it possible to use a bosch FR7DPX plug in a D16Y4 instead of a FR7LPX?

[rock3t8oi]

Washed and waxed my car:) now it looks as good as it goes

[DNYALL]

Traded my EK9 headlights for stock headlights+cash and also sold my SSR's :(

[EG52NV]

Went and bought DC2R springs, got home, jacked the car up and put in the front set, screwed everything together and took car off the stands.. WTF!!!!!!! car is now sitting 5cms off the ground! So I went on google to have a look and FML!! I put the rear springs on the front!!! FAIL!!!

[SuperJDM.]

Traded my EK9 headlights for stock headlights+cash and also sold my SSR's :(

whyd you trade for stock :(

[DNYALL]

whyd you trade for stock :(

Needed the extra cash, don't really need EK9 headlights on the racecar. I am on a bit of a budget these days so gotta find cash where i can. Baller parts arn't really on my shopping list these days :( If I can be bothered I will do the DIY black paint trick on them to make them look half decent.

[BIGTYM]

Just ordered Exedy Stage 1 Racing Clutch + Exedy Lightweight Flywheel.. :)

Been saving for my house deposit so haven't been able to buy car parts in yonks...

next up coilovers

[sangyz]

Just ordered Exedy Stage 1 Racing Clutch + Exedy Lightweight Flywheel.. :)

Been saving for my house deposit so haven't been able to buy car parts in yonks...

next up coilovers

good work..!!!!!!!!:thumbsup:

[Alvis]

Went and bought DC2R springs, got home, jacked the car up and put in the front set, screwed everything together and took car off the stands.. WTF!!!!!!! car is now sitting 5cms off the ground! So I went on google to have a look and FML!! I put the rear springs on the front!!! FAIL!!!

HAHA - that's something I'd do too LOL!

But looked at my car and had a sudden obsession to want to paint my brake calipers a Spoon blue colour :)

[EG52NV]

Traded my EK9 headlights for stock headlights+cash and also sold my SSR's :(

What's the advantage of having ek9 lights over painted stock ones?

[SuperJDM.]

What's the advantage of having ek9 lights over painted stock ones?

EK9 = sexy DIY oem headlights = ugly

[Alvis]

What's the advantage of having ek9 lights over painted stock ones?

"An aggressive looking smoked chrome or black chrome inner housing distinguishes the Civic Type-R over the standard Civics' chrome units. The orange, light refractor strip is also a thing of the past for a hassle free 'clear corner' ! Also added on these Japanese headlights, are a provision for a city light bulb for headlight illumination without having the actual headlights on."

http://www.icbmotorsport.com/jdmciek9tyr9.html

Damn expensive though...

[mugen_ctr]

pffft why would anyone pay 500 for head lights when the stock ones do just fine.... unless they actually have a better beam pattern or as such, waste of money that could go to better use imho

[Alvis]

yeh i just don't know why they are soooo expensive.... gee imagine how much it would cost to get new headlights if you owner a merc or audi or something... phew...

[SuperJDM.]

pffft why would anyone pay 500 for head lights when the stock ones do just fine.... unless they actually have a better beam pattern or as such, waste of money that could go to better use imho

isnt it around 900 from JDM yard? yeah i guess it is a waste of money i mean i wouldnt pay 900 for a set of headlights just because they have a little black/chrome in them.
But its just like changing wheels, stock wheels are fine but people still change it if you get what im saying? I guess anything is a waste of money if your using your car for daily use

[mugen_ctr]

isnt it around 900 from JDM yard? yeah i guess it is a waste of money i mean i wouldnt pay 900 for a set of headlights just because they have a little black/chrome in them.
But its just like changing wheels, stock wheels are fine but people still change it if you get what im saying? I guess anything is a waste of money if your using your car for daily use

true that, i guess u just gotta weigh up whats more important, giving the amount of cash u got to play around with, but 900!!!! Fuk that LOL, as if anyone would pay that much for some head lights! With that, id just blow it on some coilovers or so... DIY Ek9 head lights FTW

[DNYALL]

true that, i guess u just gotta weigh up whats more important, giving the amount of cash u got to play around with, but 900!!!! Fuk that LOL, as if anyone would pay that much for some head lights! With that, id just blow it on some coilovers or so... DIY Ek9 head lights FTW

EK9 headlights look 900 times better than OEM chrome headlights imho. But yeah, $900 is def a bit steep. DIY black housing headlights can look good if done right but will never look the same as the real deal.

[SuperJDM.]

EK9 headlights look 900 times better than OEM chrome headlights imho. But yeah, $900 is def a bit steep. DIY black housing headlights can look good if done right but will never look the same as the real deal.

i prefer oem headlights over DIY black housing but yeah EK9 headlights are pure sex

[sangyz]

Ek9 headlights look way better than stock headlights.. i mean WAY BETTER. and the fact that its ek9 is all that matters :p

[EK1.6LCIV]

http://i224.photobucket.com/albums/dd127/kwelrap/185958_10150112135082841_508137840_6141043_5950166 _n.jpg

Hard Race front EK camber kit fitted

mmm all bushes are now replaced on my EJ8 :) such a nice front kit, slides in alot nicer than s2 and wont move like s2 due to massive bolts on the top :)

[blastnpast]

^^ that is looking amazing bro!

I booked my ek in for a touch up (respray) on the stuff ups I made while hacking away at the exterior peeling window strip Lollol

[Sargent]

washed it :D

[Mullensxxx]

got it mod plated and bought some new fixings

[DNYALL]

Took my rear bar off to see how high I can get the muffler lifted. Not much, but should be enough for what I want to do :) Hopefully.

[DNYALL]

Just dropped my car off to get the chromoly half cage fitted :thumbsup:

[SuperJDM.]

New exhaust is in, sounds much better than the shitloop

http://i51.tinypic.com/33uz8s5.png

http://i56.tinypic.com/1267fjd.png

[EK1.6LCIV]

<3 mrwillz old beast, soooooo clean :)

[Riced_Civic]

^^^^^^^^ u seriously still on ur P's or u just put that plate in??

[SuperJDM.]

^^^^^^^^ u seriously still on ur P's or u just put that plate in??

nah im not on my Ps im on my Ls lol serious

[DNYALL]

If only I had an EM1 on my L's!!!!!!!!!!!!! Awesome first car, exhaust looks the goods man :thumbsup:

[Riced_Civic]

nah im not on my Ps im on my Ls lol serious

LOL thats what i meant.

damn i wish i had a nice car like that when i was on my Ls

[SuperJDM.]

thanks guys

[blastnpast]

Washed and polished it, then polished the twin loop along with the lip on my wheels, then had a few photos taken of it at a decent location :D

[kriZy]

Well done CK. nice great first car for someone on their L's. Gave the car a clean yesterday and pumped the tyres.\

TODAYS NEWS:

Ordered brand new: TANABE FRONT STRUT BRACE!
WOO WOO!

Definately didn't need it but it was dirt cheap so why not.

[SuperJDM.]

Washed and polished it, then polished the twin loop along with the lip on my wheels, then had a few photos taken of it at a decent location :D

i just got rid of a gay loop

[GReddy_es]

Installed EK9 tail lights,interior red carpet & mats,Spoon windscreen visor and Buddyclub Racing Condenser this arvo.Oh and gave it a wash and took pics as well :)

[sangyz]

pics or it didnt happen

[Alvis]

New exhaust is in, sounds much better than the shitloop

http://i51.tinypic.com/33uz8s5.png

http://i56.tinypic.com/1267fjd.png

Loving that exhaust - finally another civic without a canon. Looks really nice with the angle tip too + sits 'just right' outside rear lip :)

Where did you get it from/fitted? 2" cat back?

[GReddy_es]

pics or it didnt happen

All here..rest of the pics in my build thread in this section :)

http://i101.photobucket.com/albums/m79/greddy_Es/My%20EK/InteriorMakeover4.jpg
http://i101.photobucket.com/albums/m79/greddy_Es/My%20EK/InteriorMakeover2.jpg
http://i101.photobucket.com/albums/m79/greddy_Es/My%20EK/EngineBay3.jpg

[kriZy]

fkn nice GReddy_es!
i'm going to look @ your build thread now.

[Alvis]

very very nice GReddy, good work mate :)

[SuperJDM.]

Loving that exhaust - finally another civic without a canon. Looks really nice with the angle tip too + sits 'just right' outside rear lip :)

Where did you get it from/fitted? 2" cat back?

huh? lol, i got the exhaust from a website from USA. And got 2.5" Cat with 2.5" piping.

I never had a cannon from the start :P just had a gay fake twin loop

Greddy i really want your carpet and door trims. Did you just get EK9 actual door and replaced with yours?

[mugen_ctr]

yea nice indeed, its rare as fuk here... and since its ur part, now it cant be known as Mrwills car LOL

I still enjoy my cannon, its not that loud so yea lol... Been followed by cops an through booze bus, so no big deal... than again, its a expensive canon so i cant say its a cheap one as well

[SuperJDM.]

haha untill a K20 goes in its still MRWILLZ :P.

Rather than making a thread you guys see that engine bay up there? Is there a way i can buy that little thing that attaches from the whale penis onto that white part to make the piping more stable?
Mine was just held on with a piece of cloth lol.

[GReddy_es]

Greddy i really want your carpet and door trims. Did you just get EK9 actual door and replaced with yours?

nah door trim was a DIY done by the previous owner's mate haha am intending to get the EK9 door trim to swap the red bit over though :)


Rather than making a thread you guys see that engine bay up there? Is there a way i can buy that little thing that attaches from the whale penis onto that white part to make the piping more stable?
Mine was just held on with a piece of cloth lol.

which bit are u referring to?

[mugen_ctr]

the bracket that holds it? just get a 1-2 mm metal strip and bend an drill holes in it

[sneakygreek]

Not sure if this is Off-Topic, picked up my Green Em1 Yesterday. Needs a full respray IMO as paint on roof and boot has faded, but i bought it mainly cause the Engine has done 88000 genuine Kilometres and serviced every 5k at Honda. Will be making a Em1 Thread when i clean it up and get some pictures

[Alvis]

Wow, sounds nice and well looked after too :) Any pics of the car yet?

[Alvis]

gave her some 'go-go' octane boost juice and made her snap, crackle and pop ;)

also hit 60,000kms

[1996_EK_Civic]

well last night i hit 170,000kms in my EJ8 lol

[bambi]

ripped my mugen style front lip off when my car bogged in a ditch when i was watching the khanacross lol

[Ural]

Finished installation of sound system, now to connect everything, and hope for the best! Next task, secure the head unit, shame no din cage with it (2nd hand)

Ah and the dreaded rear parcel shelf speakers to take off.. That can be done another day..-_-

[GReddy_es]

Washed and degreased the engine bay yesterday.Installed the new spoon engine torque damper in the now clean engine bay :D

[tsol0811]

Finished reconditioning Jdm foldable bike and sticker bombed it, it is like NEW :) + bought bike racks for my roof racks.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196213_10150210299323136_799618135_9118162_7694186 _n.jpg

[Ural]

Connected everything, after some dramas finding a good grounding point, some success, finally some bass! Now time to not worry about it for the uni week (Till the next problem arises :P)

[DNYALL]

Picked up my car with the new monkey bars installed :)

[grifty]

for anyone that is wondering there is a light inside the demister switch that lights up with your headlights lol.

[Alvis]

had that weird stale air con smell in the car this morning.. grrr.. don't normally use a/c much (only for gf on hot days lol) - does this mean my pollen filter needs changing?

[Chriskoss]

Finished reconditioning Jdm foldable bike and sticker bombed it, it is like NEW :) + bought bike racks for my roof racks.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196213_10150210299323136_799618135_9118162_7694186 _n.jpg

what front lip is that? SIR? looks good.

[Woodzy]

Just gave my civic a long awaited wash :P

Tsol, what are the specs on those project d's?

[blastnpast]

Serviced it new oil & filter, fixed leaking gaskets, built car ramps for my low machine, hooked up my fog lights :D

[Woodzy]

Serviced it new oil & filter, fixed leaking gaskets, built car ramps for my low machine, hooked up my fog lights :D

The car ramps we have are a bitch, they scrape underneath the front bumper on my civic

[EK1.6LCIV]

drove it on lakeside park after breakfast with SAU on Sunday, bought coilovers for it

[EK1.6LCIV]

Finished reconditioning Jdm foldable bike and sticker bombed it, it is like NEW :) + bought bike racks for my roof racks.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196213_10150210299323136_799618135_9118162_7694186 _n.jpg

what brand of bike rack are you using, Im not keen on the thule silver as I have similar roof racks to yours :)?

[mugen_ctr]

Picked up my car with the new monkey bars installed :)

Pictures please :D

[DNYALL]

Serviced it new oil & filter, fixed leaking gaskets, built car ramps for my low machine, hooked up my fog lights :D

Built car ramps? picsordidn'thappen!!


Pictures please :D
Here is one:
http://img691.imageshack.us/img691/7155/good1h.jpg

Rest are at the Bottom of this page in my build thread :)
http://www.ozhonda.com/forum/showthread.php?145481-Mike-s-dedicated-track-day-Warrior-EM1/page14

[tsol0811]

what front lip is that? SIR? looks good.

Yeap they sure are SIR!


Just gave my civic a long awaited wash :P

Tsol, what are the specs on those project d's?

The specs are 15 x 7 i think it was 36+ offset? there not strong offsets


what brand of bike rack are you using, Im not keen on the thule silver as I have similar roof racks to yours :)?

The bike racks are just the egay ones but they do a great job of holding the bike.
+ was only 2 min away from my house to pick up!

[blastnpast]

The car ramps we have are a bitch, they scrape underneath the front bumper on my civic

Haha I'll post pics up of my grandfathers work I lf possible coz holy crap they lifted the car up about 650mm+ and took and hour to make :)

[1996_EK_Civic]

yea the car ramps i have, are pretty shit lol, sides of them scrap my front bar too... was gonna take it off but i couldn't get the bolt underneath to un-screw, but 2 planks off wood did teh trick to raise it up for the first part.

[blastnpast]

yea the car ramps i have, are pretty shit lol, sides of them scrap my front bar too... was gonna take it off but i couldn't get the bolt underneath to un-screw, but 2 planks off wood did teh trick to raise it up for the first part.

Haha yeah mine were built from wood and they are awesome as!! Was surprised at how low to how high we go the car ;) I need pics badly!

[Spoon-Accord]

Well didn't mod or add anything to an ek
But does buying one count? :)

[Alvis]

Well didn't mod or add anything to an ek But does buying one count? :)

Sure does :)

I sold my stock 14" steelies

[Woodzy]

Haha I'll post pics up of my grandfathers work I lf possible coz holy crap they lifted the car up about 650mm+ and took and hour to make :)

These things were huge old metal things, there's two nice scrapes underneath the lip on either side with some paint from the ramps

[newbi-ek]

Resprayed the front and fixed the back bumper with fiberglass kit, changed oxy sensor

[Red_EG4]

Well didn't mod or add anything to an ek
But does buying one count? :)

pics, I have a sneaky suspicion this is a special EK ;)

[GReddy_es]

Fitted Spoon rep side mirrors :)

[newbi-ek]

hey greddy.. how much was that spoon mirror for?

[GReddy_es]

hey greddy.. how much was that spoon mirror for?

Details on JDM Yard's thread..these are Spoon replicas by the way

[Alvis]

tried to avoid all those damn big arse puddles on the road with the monsoonal down poor over the last few days... not good for air intake lol

[newbi-ek]

ah, sweet as those look awesome.. wanna get front grills soon too!

[kriZy]

Installed my distributor cap.
Picked up my Tanabe front strut tower bar. Picked up my ITR rims and gave them a mad clean!

[EK1.6LCIV]

dropped it a few inches, handles like a machine on the new suspension setup

next, tidying up old integra engine

[Alvis]

started to realise how much it's going to cost to get a b series transplant... sigh :(

[sneakygreek]

dropped it a few inches, handles like a machine on the new suspension setup

next, tidying up old integra engine

What is your new setup?

[mugen_ctr]

started to realise how much it's going to cost to get a b series transplant... sigh :(

Agreed.. one day ill get there, once the d series puts a rod through the block, than ill definite get a b18 to replace it :D

[tsol0811]

Gave the interior a clean and sanded /polished up my black oem axle back! now its all shiny!

[mugen_ctr]

polished up the 5 zigen bpipe i got... well the 2 resonators hahahahaha, nice and shiny, just need to fix it up a bit before i put it on :D

[Ural]

Discovered a leak in clutch cylinder close to the pedal, ahhhhhh can not be bothered

[eren]

hey i want a Si Grill on my 96 gli hatch where can i get 1 to fit THx :D

[Alvis]

hey i want a Si Grill on my 96 gli hatch where can i get 1 to fit THx :D

Why don't you get a CTR one with an Si badge :)

[eren]

got original badges on ek1 gli hatch and did some cleaning and regular maintence :D

[eren]

thx btw would ebay have it?

[EK1.6LCIV]

What is your new setup?

very nice monotube coilovers, everything hardrace sells for the ek :) will take some pics soon

my 10.9 bolts arrived

also may have found a mugen wing at long last

[kriZy]

dropped the rears on my car.

[Alexx]

What brand/model ryan? Good to see you finally got some coilovers :thumbsup:

[Temp3st]

BC Racing. BR Series i believe, same as what i have in my EG, best coilovers for that price range, sooooo happy with them!

[SuperJDM.]

dropped the rears on my car.

post up some pics of your car krizy

[TypeRice]

got new buddyclub bodykit :)

[tsol0811]

Lowered it, so that there is no finger gap!

[kimang]

bolt on turbo kit for 1k

[johnn]

Just filled it up with Vortex (full tank) booyah!

[kriZy]

post up some pics of your car krizy

no way CK!

[DNYALL]

lowered it, so that there is no finger gap!

picsordidn"thappen

[mugen_ctr]

Just filled it up with Vortex (full tank) booyah!

i like ur DP :D

What i did, stickered up the windscreen a bit :D piks up in a bit

[EK1.6LCIV]

took the bike out

http://i224.photobucket.com/albums/dd127/kwelrap/post-10-13021831911275519391-Copy.jpg