PDA

View Full Version : Dedicated DA9 Q & A thread



Pages : 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15

rage_against
05-05-2010, 08:19 PM
That's the 1, only asking coz I've got a blox intake manifold n I can't see where to connect all tho hoses to, so I was just thinking of taking it out

where did you get the blox intake manifold? was it any good?

espionage85
05-05-2010, 09:24 PM
where did you get the blox intake manifold? was it any good?

i baught an engine of a forum member, and apparently it has a blox intake manifold on it, (its defenetly not a standard one).
i just got around to instaling the motor last friday, havent even wired the car up or started it because im to busy with work.
so i cant realy tell you much yet

stevo716
05-05-2010, 11:15 PM
hey man i got a skunk2 intake manifold, and blox intake is pretty much a replica
and im still using that carbon canister im actaully still using all of em except for some of the water hose ones, as im not using fitv and cold starter helper
ill take a pic if u want but yeh im using all the solenoid valves and map sensors

kikxz
06-05-2010, 10:56 AM
ohh nah adam the guy owns a DA he bought this one for parts and is stripping it

espionage85
06-05-2010, 11:32 AM
hey man i got a skunk2 intake manifold, and blox intake is pretty much a replica
and im still using that carbon canister im actaully still using all of em except for some of the water hose ones, as im not using fitv and cold starter helper
ill take a pic if u want but yeh im using all the solenoid valves and map sensors


yea champ sweet, i would appreciate a pic if you could please.

and alos another thing, hows your accelerator cable instaled?
because mine seems to be facing the opposite way =S

espionage85
06-05-2010, 12:15 PM
no bs he flew for like 4 metres he needs to learn how to drive imo XD

and i think u were talking about this chriss http://hondatech.info/downloads/Auto/Manuals/

cheers for that guys

6thgear
06-05-2010, 01:01 PM
hey guys, asking on behalf of a friend. has anyone installed dc2 tail-lights onto their da? is there much work to get them to fit? thanks

slimx
06-05-2010, 01:58 PM
i havnt done it personally, but to do it ud have to play with the rear side panels (the ones that go from the roof to the rear and frame around the door). Boot lid.. and that stupid panel between the bootlid and bumper would have to be played with too.. but thats a maybe

You'll definately have to play with those side quater panels first.. they dont just fit in there, its a totally difference size in corners but length wise im not sure.

lo0se3r
06-05-2010, 03:55 PM
dc2 tails on a Da, seen it done, dont quite like it, Its not that hard, just alot of measuring griding and flush work :)

6thgear
06-05-2010, 04:57 PM
hmmm sounds a little fiddly hey...would you guys know of any who's done it? any links perhaps. thanks guys

Spoon DA9R
06-05-2010, 04:59 PM
dont think its been done in aust, i think i've seen one in US..search on g2ic

Chriskoss
06-05-2010, 05:36 PM
why bother.. da9 tail lights are awesome for an 89-92 car.. way ahead of its time

thescotty
06-05-2010, 06:27 PM
http://www.ozhonda.com/forum/showthread.php?132571-Integra-DA9-and-other-(Misc-Indicators-Lip-Side-skirts-etc)

for sale parts i kept from the DA

stevo716
06-05-2010, 09:48 PM
yea champ sweet, i would appreciate a pic if you could please.

and alos another thing, hows your accelerator cable instaled?
because mine seems to be facing the opposite way =S

well mines a b18a and basicly the same goes all the way round
like the whole engine

Ashwee
06-05-2010, 09:57 PM
I'd rather DA taillights and headlights on a DC2 :P

But seriously, do any of you guys know what size/thread our manual gearbox drain plugs are?

espionage85
07-05-2010, 08:42 AM
well mines a b18a and basicly the same goes all the way round
like the whole engine

can you post or pm me a pic of your engine bay please?

stevo716
07-05-2010, 11:42 AM
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010153.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010154.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010155.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010156.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010151.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/07052010152.jpg

Spoon DA9R
07-05-2010, 12:43 PM
hey much improve with that intake setup?

stevo716
07-05-2010, 01:14 PM
umm lot more throttle response, got fair bit of power, but needs a proper tune i reckon to see the full benefits
on that note i can rape a commodore
i got alot more power up top, bit too far on the power band for stock tune, hence why i wanna tune and raise my rev limit a bit, as i got a rebuilt engine anyway so it can take a bit more ;)

im also running a full exhuast, extractors, hi flow cat
as u always need a full systemt o see it, just intake wont make much diff, u got to be able to let it out

Spoon DA9R
07-05-2010, 02:48 PM
well currently i do custom exhaust...very very hi flow cat:cool:...intake...how much was your intake manifold with the throttle body? sigh..i m still stuck between whether to keep modding it or not...

stevo716
07-05-2010, 02:57 PM
umm, think i spent 600 all up, all from the states the skunk2 intake was pretty cheap. throttle body was same price but yeh :)
i like it looks awesome, still prettyin up my engine bay but yehall working well, illk have my gates racing radiator hoses up soon and my new 3 point strut

Spoon DA9R
07-05-2010, 03:05 PM
What 3 point???? Custom????? ever since i saw the one in the states had one made i wanted to do it..but never got off my as to do it

stevo716
07-05-2010, 03:08 PM
yeh will be custom, bought one for the dc2 and just gonna cut and weld to make fit, :D shall be awesome

Spoon DA9R
07-05-2010, 03:58 PM
interesting, can't wait to see the end result.

stevo716
07-05-2010, 04:03 PM
lol me too :P

espionage85
07-05-2010, 06:10 PM
cheers for the pics stevo, hopefully with these i can get my car started, hopefully tuesday if i get the day off =D
will post up pics once all the engine bay is back together,
ps: i picked up a facelift bumper today from a wrecker for $100!!! Woooo

espionage85
07-05-2010, 06:30 PM
is it my old car??

http://i226.photobucket.com/albums/dd308/izy-10/carsales3.jpg

hey guys was just digging through the thread, and was wondering if anyone could tell me what rear lip that is?

cheers
jef

Ashwee
07-05-2010, 10:35 PM
Looks like a CD5 stock rear lip to meee

lo0se3r
08-05-2010, 02:19 PM
yep ash is right, custom cut cd5 accord lip.

espionage85
09-05-2010, 12:51 AM
Looks like a CD5 stock rear lip to meee


yep ash is right, custom cut cd5 accord lip.

thanks for that guys,
are there any other rear lips that people have put on a DA?

slimx
09-05-2010, 09:26 PM
myn ? OEM body kit :)

stevo716
09-05-2010, 10:30 PM
sooo $140 later , car bak on the road, ah i love diying lol
so much cheaper

espionage85
09-05-2010, 11:33 PM
myn ? OEM body kit :)

Hmmm, looks ok
after something else tho

espionage85
09-05-2010, 11:34 PM
sooo $140 later , car bak on the road, ah i love diying lol
so much cheaper

True that, I spent probably less than $100 to paint my whole engine bay lmao

A-man
10-05-2010, 06:46 PM
guys im really really sorry but


the dacrew is back online!!!!!!


u will have to resign back up however

slimx
10-05-2010, 07:50 PM
aman get me a DATABASE!! for the chatroom im gona make a nice fancy one... i just need one databse n im set

WEBSITE IS PUBLISHED EVERYONE

http://www.dacrew-au.com/

ENJOY!

(if it loads to quick it means your computer cached the Coming soon one, REFRESH THE PAGE (CTRL + F5))

Spoon DA9R
11-05-2010, 12:19 PM
oh man..have to resign up again..noooo

*registered*

stevo716
11-05-2010, 01:16 PM
yeh i cant post anymore?? nooo lol

espionage85
11-05-2010, 06:33 PM
i want to change my suspension,

if i put eg forks, and itr rear LCA i will fit Dc2 style suspension right?

but what about if i put eg forks, and eg rear LCA, will i be able to fit eg style suspension?

help would greatly be appreciated,
cheers
jef

slimx
12-05-2010, 12:30 AM
I know dc2 suspension does fit.. but your car.. might be different height levels. but straight fit buddy.

as for the EG, i know EK springs fit.. so if EK springs are the same as EG your right :)

Spoon DA9R
12-05-2010, 10:44 AM
if you look back a little, this has already been covered many times, but then again going through 190 pages is quite a lot.

if you are using DC2 parts stcik with EG bits as they are identical

Ek is a little different but if you are using coilover its adjustable anyway

espionage85
12-05-2010, 11:13 AM
thanks for the response,
190pages are alot, and the search doesnt really narrow it down enough =(
i did try tho,

so the EG and ITR LCA pretty much the same?

yes i will be running full coilovers,
just asking coz im thinking EG parts are probably cheaper than ITR parts, lol

cheers
jef

stevo716
12-05-2010, 11:59 AM
thanks for the response,
190pages are alot, and the search doesnt really narrow it down enough =(
i did try tho,

so the EG and ITR LCA pretty much the same?

yes i will be running full coilovers,
just asking coz im thinking EG parts are probably cheaper than ITR parts, lol

cheers
jef

u can actually go search post but yeh
Hence why DACREW Wooo lol
im tempted to go through it and just add the stuff thats in there
if i rele bored one day ill do it

Spoon DA9R
12-05-2010, 05:26 PM
hey amen...there is your DAcrew forum admin cadidate! lol

Spoon DA9R
12-05-2010, 05:28 PM
thanks for the response,
190pages are alot, and the search doesnt really narrow it down enough =(
i did try tho,

so the EG and ITR LCA pretty much the same?

yes i will be running full coilovers,
just asking coz im thinking EG parts are probably cheaper than ITR parts, lol

cheers
jef

yeah i m using eg forks in front and after market LCA for the rear which is eg/dc compatible

if you are using coilovers you won't have to worry as its height adjustable anyway

espionage85
12-05-2010, 05:45 PM
yeah i m using eg forks in front and after market LCA for the rear which is eg/dc compatible

if you are using coilovers you won't have to worry as its height adjustable anyway

sweet, cheers for that..
just that the EG/DC2 have a bigger range of coilovers

what about the camber arms?
will you have to use ones to fit DA, or EG/DC2 after i modify it?

Spoon DA9R
12-05-2010, 06:38 PM
sweet, cheers for that..
just that the EG/DC2 have a bigger range of coilovers

what about the camber arms?
will you have to use ones to fit DA, or EG/DC2 after i modify it?

neither will fit for the front, you can only get one thats made expecially for DA, I am using a camber&caster bolt for DA from K-Mac. doubt you can find them anymore i was lucky to get mine.

you can look at Skunk2 they make front camber arms for DA, ask Yonas @ JDMYard he can get them for you. not cheap tho...but worth it
http://www.ozhonda.com/forum/showthread.php?113008-SKUNK2-Products-*JDMyard*
on special $395only...$100 off!

as for rear camber arms, eg/dc will fit.

string
12-05-2010, 07:10 PM
The Skunk2 camber arms for DA are actually ED/EF arms that they advertise as being suitable for the DA. It's a lie and disgusting false advertising.

Unless you're very, very low, a little bit of camber isn't going to hurt your tyres so long as your bushings and alignment solid. A better reason to buy the arms is for more negative camber.

espionage85
12-05-2010, 08:46 PM
cheers, well main priority is getting my car running at the moment, was just after some options with suspension.

string: i was also thinking that, because we are intercangable with the ED's arent we?
ill probably look in the US market for front camber kits, hopefully ill get lucky.

car will be sitting on its ass, and will need alot of camber for when im done..

cheers guys
jef

lo0se3r
15-05-2010, 12:39 AM
@ espinonage "so the EG and ITR LCA pretty much the same?"

no, normal egs and the same as dc2/dc4. only EG6 (jdmcivic) and ITR is the same. Hope you dont get confused.

Vtec R
15-05-2010, 08:27 PM
A-man

i like this idea!

i would like to know how many b18c da9's are around? i have 1 and i know actionman does too. any one else?

or what other then the stock engines do people have in their da9?
**** you i have a k24 in mine

Vtec R
15-05-2010, 08:28 PM
honda a shit

**** you i have a k24 in mine

espionage85
15-05-2010, 09:40 PM
@ espinonage "so the EG and ITR LCA pretty much the same?"

no, normal egs and the same as dc2/dc4. only EG6 (jdmcivic) and ITR is the same. Hope you dont get confused.

cheers, i think i got it straight now.. lol

espionage85
15-05-2010, 09:41 PM
does anyone have an OEM DA6 centre console/arm rest that they want to sell???

stevo716
15-05-2010, 10:33 PM
does anyone have an OEM DA6 centre console/arm rest that they want to sell???
nope i love it too much
i got mine from ebay, had to come from japan

espionage85
16-05-2010, 12:04 AM
nope i love it too much
i got mine from ebay, had to come from japan

what did you search for?
because i cant find anything at all!!!!!!!!! =(


BTW, anyone going to this???

http://www.superlap.com.au/

Chriskoss
16-05-2010, 04:32 PM
what does it look like.. i have a few spare centre consol's.. dno which 1 u guys r looking for

espionage85
16-05-2010, 06:38 PM
what does it look like.. i have a few spare centre consol's.. dno which 1 u guys r looking for

pm me some pics, and if its what im looking for il pick it up ASAP =)

cheers
jef

espionage85
16-05-2010, 07:11 PM
just wondering what rails you guys are using with after market seats, recaros, bride etc??

Super-DA9
16-05-2010, 10:12 PM
Hey guys, just picked up a DC2 today and now my sister owns my DA. I have some aftermarket parts if anyones interested. Bride replica seats in black with custom welded rails to suit DA, a little bit of sun fade. Will also have some Eibach Racing springs only about 9 months old, very strong and flat in the corners without compromising much ride comfort. also have some 18" 4x100 wheels that came with the DC2 that have near new tyres, they are like a ten spoke aluminum faced rim thats painted black on the inside, would suit anything euro style or if you're going for the bling look.

Seats: $400 with rails.
Springs (should be off the DA soon): $250 (they are worth a bit more than this! sh*ts all over stupid king springs and pedders in handling. plus i don't even think they are available new anymore.)
Wheels and Tyres: $600! one tyre will need replacing or fixing due to a few buldges in the side but the rest still have practically new tread. tiny bit of gutter rash on the front ones.

PM me for pics and if you're interested. :) will post an ad in the parts for sale section as soon as i'm allowed.

So sad to not own my DA anymore but at least it's still in the family. Now time to start up a new project! :) Thanks for all the help you guys have given me!

stevo716
16-05-2010, 10:19 PM
Hey guys, just picked up a DC2 today and now my sister owns my DA. I have some aftermarket parts if anyones interested. Bride replica seats in black with custom welded rails to suit DA, a little bit of sun fade. Will also have some Eibach Racing springs only about 9 months old, very strong and flat in the corners without compromising much ride comfort. also have some 18" 4x100 wheels that came with the DC2 that have near new tyres, they are like a ten spoke aluminum faced rim thats painted black on the inside, would suit anything euro style or if you're going for the bling look.

Seats: $400 with rails.
Springs (should be off the DA soon): $250 (they are worth a bit more than this! sh*ts all over stupid king springs and pedders in handling. plus i don't even think they are available new anymore.)
Wheels and Tyres: $600! one tyre will need replacing or fixing due to a few buldges in the side but the rest still have practically new tread. tiny bit of gutter rash on the front ones.

PM me for pics and if you're interested. :) will post an ad in the parts for sale section as soon as i'm allowed.

So sad to not own my DA anymore but at least it's still in the family. Now time to start up a new project! :) Thanks for all the help you guys have given me!

hey man im def interested in the seats
im prob sayin shippin out the question, so yeh, if u cant sell in act, ill prob pick up :)
also got any pics?

Super-DA9
17-05-2010, 06:34 PM
yeah sorry dude, it's really tedious to post a set of seats. but if you wanna drop past canberra sometime they're all yours. :) i'll take some pics when we get daylight again so you can get a good look at em. the seat rails are custom welded DC2 ones so bare in mind they do fit firmly in the DA but they only bolt into the floor at three points each. Although it feels exactly the same and you'll never notice it. They feel amazing in the corners!! + guaranteed they are much more comfortable than the stock ones ;)

ALSO the suspension isn't for sale anymore sorry guys. :(

stevo716
17-05-2010, 09:29 PM
i got a good mate who goes to uni in canberra
and he comes down to vic every now and then, he shud be back for the mid semester break which is soon, so yeh
if u can wait till then i ll take em

Super-DA9
19-05-2010, 10:22 AM
well that sounds pretty reasonable to me, but approximately what date will that be?

stevo716
19-05-2010, 10:43 AM
he said after 17th of june

Super-DA9
19-05-2010, 08:42 PM
ahhh ok man, well if no-one else buys them by then, sure, ask me again closer to the date. :) and I mean canberra's a small place and there aren't many DA's so I haven't really got my hopes up of selling them before then.

kosmo90
20-05-2010, 09:04 PM
Anyone know where i can get a full coolant hose kit,not just the top and bottom radiator hoses?
B18a1

espionage85
28-05-2010, 10:04 PM
Anyone know where i can get a full coolant hose kit,not just the top and bottom radiator hoses?
B18a1

i think everyone migrated, lol
http://www.dacrew-au.com/

youll probably have to check honda, or aftermarket, i wouldnt have a clue champ

A-man
29-05-2010, 01:40 AM
hey man

i might b able to make u a silicon kit up in any colour u want

ive been working on it ive got the top and bottom hose sorted, i just need a few of the rad hoses to do aswell. im in america atm so when i get back ill get onto it if u want

stevo716
29-05-2010, 08:41 AM
hey aman, if u can make those hoses id be very interested hehe, i got top and bottom already but yeh, cheer

A-man
29-05-2010, 01:48 PM
yeh np i think i have it sorted ur looking at around 150 bucks for a kit

i can also get sparco seat rails for da integras brand new 150 aus each plus postage

stevo716
29-05-2010, 02:18 PM
without the bottom and top rad hoses
cuz i got gates racing ones

fudge_
29-05-2010, 09:44 PM
yeh np i think i have it sorted ur looking at around 150 bucks for a kit

i can also get sparco seat rails for da integras brand new 150 aus each plus postage

im keen on sparco rails! i have recaros but no rails... how soon can you order and where from? i need both driver and passanger.

kosmo90
29-05-2010, 10:23 PM
yeh np i think i have it sorted ur looking at around 150 bucks for a kit

i can also get sparco seat rails for da integras brand new 150 aus each plus postage

Cool whim me when your back and i'll get a set (hoses)
Thanks

espionage85
29-05-2010, 10:53 PM
i can also get sparco seat rails for da integras brand new 150 aus each plus postage

spewing!!! i just spent $550 on buddy club rails from the states =(

Spoon DA9R
31-05-2010, 02:43 PM
damn aman, how come u never told me about those rails before? i got my bride ones from japan a year ago..cost me 350 shipped...

anyone want them now? ahaha

fudge_
31-05-2010, 11:08 PM
damn aman, how come u never told me about those rails before? i got my bride ones from japan a year ago..cost me 350 shipped...

anyone want them now? ahaha

u got the pair? how much u want for them? i need some

espionage85
08-06-2010, 09:59 PM
hey
would anyone know what bulbs i need to replace the ones in the aircon/heater module thing

cheers
jef

A-man
09-06-2010, 02:10 PM
the seats rails r a hook up i got whilst i was in LA

i havent ordered from them yet. but if u guys keen hit me up ill get a set over i need them paid for upfront in full can havethem to u in a few weeks

ill keep my selling to dacrew im gettin a few good hook ups now but i cant advertise on ozhonda because ilhave to pay a dealer fee which i cant afford atm. so if u guys want anythn u know where to look

as for ur globes there the same as the check engine lights from memory but i think there a pain to get at

espionage85
10-06-2010, 12:25 AM
my console is out at the moment, installed a da6 vtec cluster.
so i thought id change all the globes while its appart,
do you know the name of the globes?
like eks have t10 wedge, t5 wedge
would anyone know what ours are?

Jon_51
10-06-2010, 09:55 AM
Hi guys, has anyone converted an auto DA9 to a manual?
my da got sammiched on tuesday in a four car pileathon :(. not at all my fault. pretty definite it's a writeoff. I was wondering, I found a cheap da in auto (I want a 92 one so they're a bit rarer). if I buy that and the wreck back. how hard is it to convert over to manual? what's involved?

espionage85
10-06-2010, 11:36 AM
converting to manual is something id never try myself, but i think mechanics will do it for a couple of hundred

stevo716
10-06-2010, 12:11 PM
depends how much knowledge u have, its not terribly hard, just need right tools
u might have troubles with the ecu, as ur manual ecu is from a obd0
and the new car is a auto obd1
so ur wiring and stuff will be off

Jon_51
10-06-2010, 02:39 PM
I'm pretty sure both being 92-93 da9's they would both be obd1.

stevo716
10-06-2010, 02:52 PM
oh sry thought u had a series 1, by the way u said got a 92
so yeh combability ull be fine just labour rele, its kinda of a pain if u havnt done it before.
but engine crane, big breaker bar, for axels. shud make it an easy job.
if u got complete kit in another car easy enof.
idk how ur manual radiator lasted.
but auto radiator if u block the holes for the auto trans cooling

iggie
10-06-2010, 10:01 PM
hey guys, havent been here on a while due to school commitments,
my mate was filming me drive last weekend..and a bunch of sparks came out of my exhaust..anything to worry about?

cheers
iggie

stevo716
10-06-2010, 10:19 PM
last time i saw flames out of someone exhaust, was cuz there was a hole in the exhaust near the end just have a check

iggie
10-06-2010, 10:30 PM
thanks, ill have a check tomorrow

Chriskoss
13-06-2010, 03:13 PM
Jon_51..
where bouts u located man?
might be interested in getting some parts off your smashed da9 if you buy it back
need some suspension components etc etc
let me know man
thanks

gumbs
13-06-2010, 03:48 PM
oh sry thought u had a series 1, by the way u said got a 92
so yeh combability ull be fine just labour rele, its kinda of a pain if u havnt done it before.
but engine crane, big breaker bar, for axels. shud make it an easy job.
if u got complete kit in another car easy enof.
idk how ur manual radiator lasted.
but auto radiator if u block the holes for the auto trans cooling

You don't need to block the holes, just leave them.

espionage85
15-06-2010, 10:18 PM
can anyone tell me what the difference is between the 89-92 rear bumper and the 92-93 rear bumper??

THE_MASS
16-06-2010, 12:07 PM
More curves on the lower half of a 93 model, especially near the number plate, little bit wider & rounder along the bottom edge and sides.

espionage85
17-06-2010, 11:43 AM
thanks for that,
anyone have 1 for sale??

Chriskoss
17-06-2010, 03:16 PM
thanks for that,
anyone have 1 for sale??

I might in a few weeks once I sort out whats happening with my da9 because I might part it out and buy a new shell or some other car so Ill tell you know man
the bumper is 92-93.. its white.. good condition just a few tiny nicks

cheers

espionage85
17-06-2010, 05:36 PM
ive seen your car when i came n got the lights right??

if you part out id be interested in a few things

Chriskoss
17-06-2010, 06:20 PM
ohh is that you man ahha no worries!
yeah i will let you know for sure

slimx
18-06-2010, 01:50 AM
anyone gotta spare lip? the black stock shitty one ? (one that hasnt been bent or damaged preferabbly i dont care about the condition of its paint though)

espionage85
18-06-2010, 07:23 AM
Yea, I've got one for 91 bumper

THE_MASS
18-06-2010, 06:02 PM
Anyone got a lip for the 92-93!?!

espionage85
18-06-2010, 06:52 PM
i wish lol

or even 86-89 1st gen integra

THE_MASS
18-06-2010, 07:58 PM
Would that fit on a 93?

espionage85
18-06-2010, 08:01 PM
yea apparently it does with minor mods

THE_MASS
18-06-2010, 08:59 PM
Hmmmm. Very interesting.
Any pics of one fitted to a da9

espionage85
19-06-2010, 05:31 PM
here it is

Chriskoss
19-06-2010, 05:53 PM
looks hot

THE_MASS
19-06-2010, 06:41 PM
Hot indeed!

stevo716
19-06-2010, 08:04 PM
Hey guys, decided to work on my strut brace today
bought a 3 point bar, that fits a dc2
obviously didnt fit
so had to make some modifcation
we cut it up cut bout an inch off and put a new piece of medal at back
was sweet here some piccys

http://i172.photobucket.com/albums/w23/stevo716/Car/19062010009.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/19062010010.jpg
new welds
http://i172.photobucket.com/albums/w23/stevo716/Car/19062010012.jpg
new splash of paint

also been working on my rocker cover
still needs more work, but thats the colour
http://i172.photobucket.com/albums/w23/stevo716/Car/19062010007.jpg
http://i172.photobucket.com/albums/w23/stevo716/Car/19062010008.jpg

Chriskoss
20-06-2010, 02:57 PM
Looking good stevo
I love your improvisation with the strut bar
I bought a 2 point strut, also U.R
Says fits dc/eg/ek
and it fit on my da9 with not too much hassle
maybe the 3 point is different but yeah, good work

stevo716
21-06-2010, 12:09 AM
yeh the 2 point fits as in the strut part, but the 3rd point was too long so cut and weld and put a new plate

stevo716
21-06-2010, 12:25 AM
hey do dc5r recaros fit on, the da obviously with rails
but like if i get say, the rail aman sellin will it fit? or custom work needed

espionage85
21-06-2010, 09:03 PM
hey guys, this is gon sound SUPER STUPID AHAHAHHA
its been a long time since ive seen the inside of my car at night with light on, actualy i never have seen the inside of this DA at night, only my previouse 1 about 5-6 years ago lol
just curiouse, what colour is the A/C / heater control lights suppose to be? lmao
because i changed my bulbs to white LED, and its blue..
but i wanted white or red if i put red LED's in =S

espionage85
21-06-2010, 09:05 PM
hey do dc5r recaros fit on, the da obviously with rails
but like if i get say, the rail aman sellin will it fit? or custom work needed

yea they should i guess, im putting dc2 recaros in once i get rails..
gee i hope they fit lol

stevo716
21-06-2010, 09:06 PM
the lights r white

espionage85
21-06-2010, 09:24 PM
you sure lol

then wtf are mine blue now? lol

stevo716
21-06-2010, 09:29 PM
lol....yeh all dash lights r white

espionage85
21-06-2010, 09:31 PM
ok, ill wait for my super LED chips to arrive in red and see what happens i guess..

cheers for that

mooshie
21-06-2010, 10:13 PM
Standard dash lights should appear slightly bluish as they have a small blue rubber 'condom' covering the globe itself. Have seen this on 2 '91 tegs, not sure if it is on all of them

Chriskoss
21-06-2010, 10:36 PM
yeah its on all of them
think it disperses the light more evenly with the rubber cover on the bulbs, also protects them etc

espionage85
21-06-2010, 10:48 PM
yea the globes that i pulled out had blue condoms on them, but i replaced them with white LED bulbs they with no blue condom and they seem to be realy blue

sangbui
24-06-2010, 11:52 AM
Hello,

I need help about changing oil/oil filter in 1989 Integra LS.

I've never done one before and need some advice.

The car has a B20B engine (from a 00' CRV [i was told from previous owner]) so I'm wondering does that change anything about oil/oil filter changing process?

do i follow the honda crv service manual instructions and buy the parts(oil filter) for a crv?
or are they the same as the DA9 so i just need to use the LS service manual?


[should i also post this in the noob section?]


- Sang

stevo716
24-06-2010, 01:22 PM
yeh you wud use the filter and oil for b20b

string
25-06-2010, 12:43 PM
The B20 and B18 are almost identical. Same oil filter, same bearing clearances, same oil.

kosmo90
25-06-2010, 04:27 PM
Had enough of ppl putting up for sale signs and just stopping contact after agreeing to prices/postage etc.
Why do people do shit like that? Got me ****ed
Anyway i'm deleting my account,i'll still hang around for info but i refuse to talk some of the retards that frequent such a good forum.
You three know who you are!!!!

ACTI0NMAN-1
26-06-2010, 06:08 PM
will you frequent the da-crew forums or are those members on both?

A-man
26-06-2010, 08:37 PM
???

what happened man

espionage85
26-06-2010, 09:57 PM
yea, fill a brother in?

rage_against
27-06-2010, 06:27 PM
guys any idea on how to go about getting a different cluster into a da? ie dc5r? is it at all possible? lol

Chriskoss
27-06-2010, 06:42 PM
prob be alot of work involved man.. If you can get your hands on a jdm XSi da9 cluster that'd be cool..but not worth the time, money or effort

rage_against
27-06-2010, 06:56 PM
ive got a jdm cluster, with 8200 redline and 180k speedo

espionage85
27-06-2010, 07:17 PM
what is the reason you want to instal the cluster?
if you want a higher redline, purchase a da6 vtec cluster.
thats what i did =D

Spoon DA9R
28-06-2010, 12:20 PM
if its for show..

go to g2ic.com

some have ap1 clusters fitted


btw..any of u boys in melb has a spare stock exhaust???

stevo716
28-06-2010, 04:36 PM
Yo finished off my engine bay well for now lol

http://i172.photobucket.com/albums/w23/stevo716/Car/28062010026.jpg

wanna see more go here

http://www.ozhonda.com/forum/showthread.php?112784-Steve-s-1992-Rebuilt-NA-B18A1-DA9

rage_against
28-06-2010, 04:46 PM
what is the reason you want to instal the cluster?
if you want a higher redline, purchase a da6 vtec cluster.
thats what i did =D

i want a fuel light lol

Spoon DA9R
28-06-2010, 05:02 PM
i like that 3 point strut!

stevo716
28-06-2010, 05:05 PM
i like that 3 point strut!
Hehe i know its awesome took a bit of work, plus u got to have a aftermarket intake manifold otherwise wont fit oem one too high up

rage_against
30-06-2010, 05:35 PM
http://cgi.ebay.com/ebaymotors/Acura-Integra-GS-1992-Acura-Integra-Fully-Customized-_W0QQcmdZViewItemQQhashZitem2a0841047dQQitemZ18052 7105149QQptZUSQ5fCarsQ5fTrucks



i hate america, i know the paint job looks crap but i mean the amount of work/cost gone into it for that price is pretty damn sweeeet

espionage85
30-06-2010, 09:43 PM
i want a fuel light lol

lmao, whats wrong with your fuel light?
just change the bulb

once my dash is back in ill take pics of mine after changing all the bulbs

lo0se3r
01-07-2010, 01:46 AM
we dont have fuel lights do we???????? (audm DA9) both my s1 and s2 didnt have a fuel light, not sure about the xsi's?

stevo716
01-07-2010, 03:22 AM
lol we have fuel lights??

Spoon DA9R
01-07-2010, 10:19 AM
you really shouldn't need ur fuel light to let you know u need to fill up..lol

espionage85
01-07-2010, 11:08 AM
awww, my bad. maybe we dont.
im thinking about the ek ahahhahah
been driving that for the last few months since my car is off the road
my bad guys

rage_against
01-07-2010, 06:28 PM
haha aww man you had me all excited thinking all i needed was a globe lol. and no xsi dont have a light either.

ACTI0NMAN-1
01-07-2010, 09:59 PM
Can anyone confirm if the DA9 Innovative Mounts are Passenger, Driver (transmission) and rear.
And no front.

lo0se3r
03-07-2010, 01:44 PM
haha aww man you had me all excited thinking all i needed was a globe lol. And no xsi dont have a light either.

lolol :'(

ACTI0NMAN-1
04-07-2010, 02:19 PM
Can anyone confirm if the DA9 Innovative Mounts are Passenger, Driver (transmission) and rear.
And no front.
Nevermind i checked myself.

Jon_51
05-07-2010, 01:12 PM
anyone in brisbane got a set of standard headlights for sale?

espionage85
09-07-2010, 05:41 PM
finaly all my LED bulbs have arrived, after instaling them i crosschecked my new cluster with my old one, and it turns out that i do have fuel light in my new cluster, bulb and all in place!!!
the old cluster that i took out would look alot like all yours
the new one i instaled has higher revs, and where the fuel gauge is theres a light cover. and on the back theres an extra t10 bulb also.

espionage85
09-07-2010, 05:43 PM
anyone wrecking a da by any chance?
i need the a/c heater unit.. my stupid cold/hot module snapped inside or came out of place somehow

cheers
jef

THE_MASS
10-07-2010, 01:08 PM
Hey jeff throw some pix up of your cluster!

rage_against
11-07-2010, 04:33 PM
dude do you have the cluster with 8200 redline? my fuel gauge has what looks like a fuel light but never comes on.



also anyone got a pair of stock seats i can buy?

Chriskoss
11-07-2010, 05:11 PM
Guys I will be wrecking my complete da9 in the next month.. think its written off (body is fine but hit gutter.. prob cost too much to replace)

So.. rage against yes I will have stock 92 seats (the better material than the 89-91 da9's) and all other people looking for stuff.. I will let you all know

cheers

espionage85
11-07-2010, 05:33 PM
dude do you have the cluster with 8200 redline? my fuel gauge has what looks like a fuel light but never comes on.

yea, thats the cluster, my lights hasnt turned on either lol
i dont think our plug at the back has a pin for it to work lol

iggie
12-07-2010, 05:09 PM
hey guys, update on the teg

my mate and myself were quite bored last night..so we decided to work on the teg :)

after a sleeepless night..and many hours of this morning... we fixed the dent i had in the back :)

its not perfect but hey its better than what it was before!

iggie

Chriskoss
14-07-2010, 03:47 PM
howd you do that at home?
thats great work dude

iggie
14-07-2010, 07:06 PM
howd you do that at home?
thats great work dude

thanks man, his dads gotta heat gun so we heated up the dent..took out all the interior pieces..tail lights, back bumper etc..and hit it out wid a mallet and a piece of wood i got from my other mates brother who is a panelbeater..ill upload progress pics once i get them

stevo716
14-07-2010, 09:09 PM
I know its written through this forum and numerous times but im still confused
Ive got a leak on the drivers side niormally i wudnt care but its goin through all my electronics
and ive already killed one Central locking unit
So yeh if someone cud take a pic wud be sweet in wat I need to replace

2MPRS
14-07-2010, 09:21 PM
anyone wrecking a da by any chance?
i need the a/c heater unit.. my stupid cold/hot module snapped inside or came out of place somehow

cheers
jef

there is 2 or 3 da9s at pick and payless i know 100percent one has a ac unit in there that looked in pretty good nick

espionage85
14-07-2010, 09:31 PM
there is 2 or 3 da9s at pick and payless i know 100percent one has a ac unit in there that looked in pretty good nick

they still there?
ive fixed the problem tho
thanks for the heads up

espionage85
14-07-2010, 11:16 PM
I know its written through this forum and numerous times but im still confused
Ive got a leak on the drivers side niormally i wudnt care but its goin through all my electronics
and ive already killed one Central locking unit
So yeh if someone cud take a pic wud be sweet in wat I need to replace

depending on what area youre from, find your local honda dealer
give the this part no. HO-91608SJ6003, order 15 of them
they cost $2.87 a piece

if you take your wipper cover off, there will be another 2 covers i think it is..
under that you will see hole, there should be those little rubber gromets, but after 20 years there will probably be jjust the ends sitting there..
thats what you have to replace, youll see in the pic

stevo716
15-07-2010, 09:31 AM
depending on what area youre from, find your local honda dealer
give the this part no. HO-91608SJ6003, order 15 of them
they cost $2.87 a piece

if you take your wipper cover off, there will be another 2 covers i think it is..
under that you will see hole, there should be those little rubber gromets, but after 20 years there will probably be jjust the ends sitting there..
thats what you have to replace, youll see in the pic

Ok awesome man Thanks

stevo716
21-07-2010, 10:13 PM
Hey, i read ak motorworks closed...
where can i get a ecu and tune now,
Melbourne preferably east side??

ben11
24-07-2010, 12:40 PM
hey sorry to just jump in with what might be a stupid question but i was looking at cai's for my da9 and the only one's i could find on ebay were from america. does anyone know if they will fit on the integras in aus? thanks

here is the link btw

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150365233015&viewitem=&sspagename=STRK%3AMEWAX%3AIT

Chriskoss
24-07-2010, 12:56 PM
Yea man they will fit.
In my opinion try just buying a cheap generic CAI system for like 100 bucks posted, then just ditch the crappy pod filter supplied and grab a good pod such as 3A racing etc, and you'll have a pretty good set up
This is what I did with a short-ram intake system
If you want brand names then by all means go for it I guess

ben11
24-07-2010, 02:16 PM
ok thanks alot bro, is there anything i should be looking for in the generic ones to get the best out of it?

espionage85
24-07-2010, 08:07 PM
nothing is better than an oem airbox, imo
just slap a k&n filter pad in it and there you go

Jon_51
26-07-2010, 10:35 AM
^^^ and remove the intake resonator beneath it.

espionage85
26-07-2010, 12:14 PM
yep,
i think statistics show that you gain more power with the airfilter boxed of..
theres a link thread on OH somewhere about it.

espionage85
26-07-2010, 12:29 PM
what kind of wireing loom does the 92-93 DA have?
i know 89-91 is obd0, is the 92-93 obd1?

stevo716
26-07-2010, 04:27 PM
yeh 92-93 is obd1

espionage85
26-07-2010, 06:33 PM
stevo716, since you know the da back to front, you might be able to help me.
where ix the thermostat on the DA?
ive swapped my engine to b18c2, and my fan doesnt engage
ive noticed that theres no thermo plug on the b18a, but on the b18c2 there is.
how do i get my shit working lol

stevo716
26-07-2010, 08:24 PM
stevo716, since you know the da back to front, you might be able to help me.
where ix the thermostat on the DA?
ive swapped my engine to b18c2, and my fan doesnt engage
ive noticed that theres no thermo plug on the b18a, but on the b18c2 there is.
how do i get my shit working lol

Theres no thermo plug on the series 1/obd0 b18a there is the series 2/obd1

but basicly the thermostat is just below the starter motor
follow ur lower radiator hose from, that leads straight to the thermstat, and the thermo switch ont he series 2 b18a is on the thermostat housing.
Hope that helps

espionage85
26-07-2010, 08:26 PM
ive got a series 1,
any advice?

espionage85
26-07-2010, 08:30 PM
i pretty much threw in a b18c2, with a ys1 cable gearbox, used my loom obd0 n added the vtec wire

stevo716
26-07-2010, 08:32 PM
mmmm, just had a quick read and apparently, series 1 thermo switches where on the back of the engine,
ur using the b18c loom though yeh?
that shud of plugged into the thermostat fine

stevo716
26-07-2010, 08:36 PM
i pretty much threw in a b18c2, with a ys1 cable gearbox, used my loom obd0 n added the vtec wire

ah that might be ur prob. that wire dont exist,
b18c2 is obd1 as well i believe depedning on yr of engine
but yeh it goes back to ecu, then out to fans. so ull need the obd1 loom i believe, unless u can get them to turn on another way
research how obd0 turned em on and run it that way??

stevo716
26-07-2010, 08:39 PM
theres a switch on back of the block for a obd0 that turns on the fans too, so the plug is there
if u ran that to the thermostat housing shud work. itll prob be diff outlet though

espionage85
26-07-2010, 08:41 PM
ok, so how does this work?
could i have plugged in something in the wrong place?
what are the 2 plugs that connect to the radiator fan?

stevo716
26-07-2010, 08:48 PM
far as i read from googling
the fan swithc for the obd0 is on theback of the block
There should be 2 plug in there
oil pressure and fanswitch
so u shud have one dangling
is there a wire plugged into the thermostat?

from wat i found ppl had to extend the fan switch cable to reach the thermostat

espionage85
26-07-2010, 08:51 PM
ok, so my obd0 harness should have the plugs that i need to plug into the fanswitch on the b18c2 motor..
maybe i plugged it into the oil preasure?
man this is really frustrating me lol
im scared to drive the car now, since it overheated on me..

and you are the king of googling lol
i cant find s#it

stevo716
26-07-2010, 08:53 PM
type in fan switch obd0
and read around
im pretty sure its at back of block
but i cud be wrong
i got obd1 engine so yeh

espionage85
26-07-2010, 08:58 PM
ok, cheers for that..
ill keep you updated on how i go.. might head out now n have a quick look..

espionage85
26-07-2010, 09:08 PM
ok, i just had a quick look.
my b18a1 whick i took out has 2 plug looking things next to the oil filter
1 has 1 pin thing coming out of it
and the other is slighly bigger with 1 pin coming out..
i looked at the loom that i received with the motor i purchased, and it looks like he modified it with plugs?

im gon look at my loom that in the car in a minute and see if i can find the switches i need,
i hope its still there, hanging somewhere lmao

http://www.google.com.au/imgres?imgurl=http://img18.imageshack.us/img18/6276/coolanttempwires.jpg&imgrefurl=http://www.honda-tech.com/showthread.php%3Ft%3D2621907&usg=__n39WvQOMj-p1eQnDhYZNVYLH6aQ=&h=346&w=461&sz=79&hl=en&start=3&um=1&itbs=1&tbnid=515_aVE-66AjqM:&tbnh=96&tbnw=128&prev=/images%3Fq%3Dfan%2Bswitch%2Bb18a1%26um%3D1%26hl%3D en%26sa%3DN%26rls%3Dcom.microsoft:en-au:IE-SearchBox%26rlz%3D1I7HPAB_en%26tbs%3Disch:1

that is what i see on my b18a1

i have a feeling the b18c2 will look different

espionage85
26-07-2010, 11:31 PM
STEVO716!!!!! you are the man...
you lead me on the right track.
i just finished, my obd0 loom had the wires for the fanswitch, as shown on the link above.
so i extended the wires, and found the right plug of my other loom, and put it all together and onto the new fan switch which sits next to the thermostat on the b18c2.
going to run it through the loom neatly next week when i convert to obd1 and put in a new computer..

thanks heaps for that bro, appreciate it

espionage85
26-07-2010, 11:33 PM
now my next problem.. ahahhaha
my reverse lights dont work

stevo716
27-07-2010, 03:50 PM
STEVO716!!!!! you are the man...
you lead me on the right track.
i just finished, my obd0 loom had the wires for the fanswitch, as shown on the link above.
so i extended the wires, and found the right plug of my other loom, and put it all together and onto the new fan switch which sits next to the thermostat on the b18c2.
going to run it through the loom neatly next week when i convert to obd1 and put in a new computer..

thanks heaps for that bro, appreciate it

haha no probs man

with ur reverse lights shud be a wire coming out of your gearbox
near the clutch lever
works when gear is selected so ya

espionage85
27-07-2010, 06:31 PM
thats plugged in, but still no light lol, checked everything also, fuses bulbs the whole lot
wheres the earth form that?

stevo716
27-07-2010, 08:02 PM
thats plugged in, but still no light lol, checked everything also, fuses bulbs the whole lot
wheres the earth form that?

hmm dont know strange i assume the earth just be gearbox...on the da9 theres an earth strap from the holder thats on gearbox near the clutch lever

stevo716
28-07-2010, 02:34 PM
Gave the car a wash so thought id post up some recent pics xD

http://i172.photobucket.com/albums/w23/stevo716/Car/car1.jpg

http://i172.photobucket.com/albums/w23/stevo716/Car/car2.jpg

http://i172.photobucket.com/albums/w23/stevo716/Car/car3.jpg

http://i172.photobucket.com/albums/w23/stevo716/Car/car4.jpg

http://i172.photobucket.com/albums/w23/stevo716/Car/car5.jpg

http://i172.photobucket.com/albums/w23/stevo716/Car/car6.jpg

espionage85
28-07-2010, 04:54 PM
how much would you charge for your strut bar if i wanted 1 made just like yours lol

stevo716
28-07-2010, 10:02 PM
how much would you charge for your strut bar if i wanted 1 made just like yours lol
well my mate helped me, and another mate welded it so ya lol
but prob with it is it doesnt fit with stock manifolds i know ur running a b18c but dont know how high it is...
if i had a stock manifold wud noway fit
it just fits now lol

Jon_51
29-07-2010, 12:08 PM
car's looking good stevo.

espionage85
30-07-2010, 05:22 PM
WOOO, blew my altenator on my way to winterbeatz!
$200 tow home, spewing...
rain aint helping either, cant work on the car :(

espionage85
30-07-2010, 05:23 PM
all good, next is convert to obd1 and s200,
i wanna get the skunk2 IM n TB, how was it for both?

stevo716
30-07-2010, 08:03 PM
all good, next is convert to obd1 and s200,
i wanna get the skunk2 IM n TB, how was it for both?

wat ya mean how was it?
as in fitting, it was pretty easy just find a vacumn diagram and have to get rid of few of the cold start helpers,
oh and also the b18c map sensor is mounted ontop of tb thatll cuz fitment issues if u put the strut bar on
cuz mine just a had a valve and i broke it off lol

espionage85
30-07-2010, 10:05 PM
my bad, i meant how much did it set you back
ive got a oem TB 68mm of a b20 i think and blox IM
still using the standard map sensor thats on our firewall
i wanna remove the whole lot tho ( map, carbon canistor n everything on that bracket)
and use the TB map sensor, so i guess no strut bar 4 me lol

stevo716
30-07-2010, 11:43 PM
my bad, i meant how much did it set you back
ive got a oem TB 68mm of a b20 i think and blox IM
still using the standard map sensor thats on our firewall
i wanna remove the whole lot tho ( map, carbon canistor n everything on that bracket)
and use the TB map sensor, so i guess no strut bar 4 me lol

ummm 400 shipped for IM, skunk2 and blox im and basicly the same, blox copied skunk 2 lol

92' DA9
31-07-2010, 03:50 PM
Hey does anyone know where the diagnostic port is?

stevo716
31-07-2010, 04:32 PM
Hey does anyone know where the diagnostic port is?

under passenger foot well, theres 2 ends sitting there one is the diagnostic port

ben11
07-08-2010, 02:01 PM
hi i just bought a Weapon R intake kit but the coupler to connect to the throttle body is too small - anyone know if a larger coupler is available? Manifold throat measures closer to 2.7" (68mm OD) than the 2.5" adaptor supplied with the kit

http://cgi.ebay.com/ebaymotors/1990-1993-Acura-Integra-Weapon-R-Air-Intake-_W0QQcmdZViewItemQQhashZitem255c507f94QQitemZ16046 2569364QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

Ben11

stevo716
07-08-2010, 03:03 PM
hi i just bought a Weapon R intake kit but the coupler to connect to the throttle body is too small - anyone know if a larger coupler is available? Manifold throat measures closer to 2.7" (68mm OD) than the 2.5" adaptor supplied with the kit

http://cgi.ebay.com/ebaymotors/1990-1993-Acura-Integra-Weapon-R-Air-Intake-_W0QQcmdZViewItemQQhashZitem255c507f94QQitemZ16046 2569364QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

Ben11

hey u can buy a coupler that converts 2.5 to 2.75" inch thats wat u need
autobarn or similar sell em
i use one from my piping to the filter so ya

Jon_51
09-08-2010, 01:50 PM
i changed the spark plugs last week. There was oil sitting above the plug on cylinder 3 (i think it was cylinder 3).
any idea what might be wrong here? rocker cover gasket?

stevo716
09-08-2010, 02:12 PM
i changed the spark plugs last week. There was oil sitting above the plug on cylinder 3 (i think it was cylinder 3).
any idea what might be wrong here? rocker cover gasket?
Under the rocker cover theres rubber seals, that sit under each spark plug probably thats worn, but if you take a rocker cover off, you prob shud change all the gaskets, u can get a gasket kit from bursons
$90 i think
thats if it above, when my rings were stuffed i was gettin oil above like take the lead off and theres oil all in there, you shud do a compression test to make sure.
I hope its gaskets for your sake. haha

rage_against
12-08-2010, 11:27 PM
guys have any of you with b16a's had any problems with flat spots in the rev range and misfiring, rough idle, idle at 100rpm and feels like its going to stall lol?

slimx
14-08-2010, 03:32 AM
i beleive any car reving at 100rpm feels like its about to stall buddy? lol

rage_against
14-08-2010, 04:37 PM
yeah lol. but i mean it feels like its going to stall before its revving at that. i totally just plain suck at lyFe lol

stevo716
14-08-2010, 04:44 PM
sounds like when my map sensor died..

rage_against
14-08-2010, 05:50 PM
well thats what ive read and im not sure whether to just bite it and go to a mechanic or try and diy

stevo716
14-08-2010, 06:01 PM
disconnect the map sensor see if makes a diff
like gets worse or stays the same
then just make sure not leaking any vacumn ull hear it, if u are

rage_against
15-08-2010, 06:18 PM
soooo, say your talking to a retard right, where do you tell them to find the map sensor?

stevo716
15-08-2010, 06:22 PM
umm u got a b16 yeh ummm, well on a stock da9 there sitting on the firewall, there 3 things 2 lil round cylinder things and one square one, the square one is the mapsensor
on a b18c i know it sits on top of the Throttle body, im not too sure on b16, but basicly the map sensor connects a vacumn line to the tb, so follow ur vacumn lines, one of them shud lead to the map sensor, which itll say on top

rage_against
15-08-2010, 06:25 PM
your a legend thanks heaps dude.

Jon_51
17-08-2010, 11:24 AM
Under the rocker cover theres rubber seals, that sit under each spark plug probably thats worn, but if you take a rocker cover off, you prob shud change all the gaskets, u can get a gasket kit from bursons
$90 i think
thats if it above, when my rings were stuffed i was gettin oil above like take the lead off and theres oil all in there, you shud do a compression test to make sure.
I hope its gaskets for your sake. haha

turns out it was just one of those rubber seals you were talking about.

stevo716
17-08-2010, 03:10 PM
turns out it was just one of those rubber seals you were talking about.

cool cool easy fix

espionage85
30-08-2010, 01:03 AM
hey all!!!

keeping this thread alive, well trying anyways lol

heres a lil update on my car, changed the doors for better power windows, facelift front bar for cheap as chips.
today i was bored and i had a spare set of oem suspennsion laying around, got the grinder out n played around a lil..

enjoy!

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03782.jpg

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03785.jpg

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03792.jpg

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03794.jpg

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03799.jpg

http://i208.photobucket.com/albums/bb210/jeff_inauen/da9%20slammed/DSC03800.jpg

stevo716
30-08-2010, 07:25 AM
looking sweet man

espionage85
30-08-2010, 09:12 AM
i love the look, but i cant drive it lol
wheels are 15x8 +0 offset with 195/45 tyres
bottomed out getting my driveway n exhaust was constantly scrapping just driving down my street ahahahaha
throwing 16x8 +0 offset on today, if its still to low im gon raise it again =(

A-man
30-08-2010, 06:36 PM
looks sweet man

EKVTIR-T
30-08-2010, 06:43 PM
Looks great but yeah useless for actual driving

One of the downfalls of the DA,the low floorpan/undercarriage

Its a catch 22.To have it at a nice height takes away most of the suspension travel and you end up scraping anyways..

iggie
30-08-2010, 11:10 PM
hey guys,

I'm having trouble shifting into 2nd from 3rd and to 3rd from 4th..any idea wat the problem is?

Cheers,
ig

espionage85
30-08-2010, 11:13 PM
hey guys,

I'm having trouble shifting into 2nd from 3rd and to 3rd from 4th..any idea wat the problem is?

Cheers,
ig

ive got the same problem with 3rd gear,
i thinks its the synchros?

espionage85
30-08-2010, 11:17 PM
wooo!!!
my altenator shit itself again!!!!!! sounds like the bearing is gone
i think it was because i had it to tight?

anyways, where do i get a new 1 of these asap?

EKVTIR-T
30-08-2010, 11:18 PM
At regular speeds and revs or "spirited" driving?

Probably synchros worn

espionage85
30-08-2010, 11:21 PM
any idea on how much to fix that roughly?
coz its irritating me lol

stevo716
30-08-2010, 11:23 PM
syncros usually just crunching thats wat im doing atm,
2nd doesnt go in sometimes,
but basicly gearbox will have to open

stevo716
30-08-2010, 11:24 PM
fix ur gearbox??
i found carbonmoly syncros for 300, then plus labour
i plan on lsd for 700, 300 for syncros, and new bearings for 400
thats my gearbox rebuild when i get some money....Oh plus labour, cuz yeh im not attempting my gearbox lol bad expierience once is enof

espionage85
30-08-2010, 11:27 PM
well lucky me, i have a short ratio ys1 gearbox with oem lsd.
so i def wanna keep it, thanks for the rough quote lol
ill need to look into it when i have spare cash

stevo716
30-08-2010, 11:31 PM
well lucky me, i have a short ratio ys1 gearbox with oem lsd.
so i def wanna keep it, thanks for the rough quote lol
ill need to look into it when i have spare cash
if ur lsd disappears it wasnt me <.<
not fixing gearbox yet still wondering if need to change some gear ratios
ill research more when i got my power band set lol

EKVTIR-T
30-08-2010, 11:34 PM
yeah ShteveOs pretty much on the money :)

espionage85
30-08-2010, 11:36 PM
find what the difference is between a ys1 short ratio n yours
i love my gears, lol

iggie
31-08-2010, 10:54 AM
At regular speeds and revs or "spirited" driving?

Probably synchros worn

at regular speeds, I've already had to replace the gearbox once, not keen on replacing it again.

ben11
02-09-2010, 11:37 PM
hey bretheren what do you think of the probably dodgy turbo kits on ebay such as

http://cgi.ebay.com/ebaymotors/90-91-92-93-ACURA-INTEGRA-B16-B18-CAST-TURBO-KIT-12psi-_W0QQcmdZViewItemQQfitsZModelQ3aIntegraQQhashZitem 27b2d3ebebQQitemZ170503957483QQptZMotorsQ5fCarQ5fT ruckQ5fPartsQ5fAccessories

and what reliability issues are there in turboing keep in mind my integ is just clicking over to 77k kms

thanks

espionage85
05-09-2010, 10:14 PM
hey guys,
can anyone tell me if the ITR brake master cylinder is a straight swap with ours?

stevo716
05-09-2010, 10:26 PM
u need the brake booster too and then make ur brake lines match up

espionage85
05-09-2010, 10:33 PM
wow that sux!!!
coz i searched it, and found this..
http://www.ozhonda.com/forum/showthread.php?81824-Dedicated-DA9-Q-amp-A-thread&p=2737495&highlight=brake+booster#post2737495

just wanted confirmation

stevo716
05-09-2010, 10:39 PM
wow forgot bout that.... hahaha Kinda awkward considering thats me asking lol
umm wat u need for brake upgrade, cuz im bout to upgrade my brakes and got told id get away with using current MC
for using ITR calipers

espionage85
05-09-2010, 10:45 PM
but doesnt spoon say that he just changed his mc, and bolted it straight on which made a noticable difference?
im not to keen to change to itr callipers yet coz i just installed brembo rotors not long ago lol.

stevo716
05-09-2010, 11:00 PM
yes he does and this intrigues me too, might wanna pm him and double check
i just bought itr calipers lol

espionage85
05-09-2010, 11:06 PM
so with instaling itr callipers youd have to get bigger discs right?
or do they run with the oem size that we have?

stevo716
05-09-2010, 11:23 PM
yeh bigger discs
283mm x 23mm
prelude rotor the same, there 4 stud just got to redrill to 4x100

espionage85
05-09-2010, 11:28 PM
ahhh ok, yea i think ill wait until my discs need replacing lol.
ill do more research on the ITR MC, hopefully its a straigh swap

stevo716
05-09-2010, 11:34 PM
yeh let me know man, cuz i might have to change depending if my MC cant hack it

gumbs
06-09-2010, 11:31 AM
Unless you're doing it for bling I wouldn't bother, I considered it a couple of years ago and ended up just sticking good pads and fluid in and I couldn't get them to fade in the hills. A few guys that did track work had the same results. Swapping break boosters is going to cost you a fortune unless you go second hand, I had a vacuum leak on my stock one and I couldn't find an after market replacement under $700 and that didn't have type R tax on it.

stevo716
06-09-2010, 11:43 AM
i need to change rotors and pads anyway
and i found some itr calipers cheap, im after more braking power too, cuz i want to track so ya

rage_against
08-09-2010, 11:18 PM
i have type r brakes, they are so much better than stock if you can find a cheap setup go for it

stevo716
08-09-2010, 11:36 PM
yup ive bought em there on the way gonna upgrade the rotors to dba 4000 series slotted, and some decent pad, got braidedlines in
and race brake fluid shud be pretty epic

espionage85
08-09-2010, 11:48 PM
damn, let me know how it goes stevo!
and pm your total money spent, id really consider it if its not to expensive

stevo716
09-09-2010, 12:02 AM
no prob dude

espionage85
09-09-2010, 12:06 AM
can anyone tell me why my vtec only engages sometimes?
theres enough oil,
changed the solanooid gasket already,

ive read that vss sensor plays a roll?
any other suggestions?

slimx
09-09-2010, 12:24 PM
speed sensor maybe? friends crx did that speed sensor got replaced costed $50 it was fine

ben11
12-09-2010, 10:35 PM
hey does anyone know what temp the oven should be to take apart the headlights? and also what sealant should be used to seal them back up because mine are heaps fogged up + will paint the housing ... sorry for noobness

cheers