Dedicated DA9 Q & A thread

[FR33K]

any1 know where u can get a fog light switch for DAs

im just using a demister switch :) works just fine

also, if you get the second fog light, you will have to rewire them separately coz the second one wont work.

[A-man]

u could just wire it in and use the blanks in the dash

[SHI-FTY]

i found a fog switch for a DA on ebay U.S. looks sweet to me i would want something that adds to factory options on the car and i dnt want sumfin that people would point or touch and say wat does this do cause d last thing i need is another fine

[SHI-FTY]

hey guys hav youz posted up ur DAs in the appearance section 'lets see some integras' lets giv our cars some rep aye
http://www.ozhonda.com/forum/showthread.php?t=24218&page=133

[A-man]

yeh i looked in my manual the other day and the fog lights r an option on the american ones so u can use those switchs they look like the demister switch and will bolt straight in...


as for the centre console just check items for sale on g2ic but im in the process of getting one... and a coin holder near the steering wheel ive never had one WTF with that

[EKVTIR-T]

i gotta say their 4door DAs are embarrisin i can just imagine all the shiellas id get wif a 4 door DA lol but hence more space in d bak :P

Nothing wrong with the sedans

http://img802.mytextgraphics.com/photolava/2008/08/23/da9rollingshot74hnzn9-4bm98ux5l.jpeg

They look tough :thumbsup:

[Spoon DA9R]

that lip look weird on that..

[thescotty]

nuh dunt like 4 door. 2 door all the way, 2 dr looks tougher!

[A-man]

that looks mintox prob i wish i could find a cheap 4 door around perth id be keen as

[DA9B18C]

blah, thats uuggllyyy!!!!

[A-man]

so what happened about the fog light switch...

[DA9B18C]

hey, question about main fuse box in engine bay?

if i disconnect that fuse box for 30min maybe, will anything happen to the timing or general running of the car? i want to disconnect it in order of relocating it.

what u think?

[thescotty]

yeh shit i wanna re-located mine...i second that question

[ACTI0NMAN-1]

hey, question about main fuse box in engine bay?

if i disconnect that fuse box for 30min maybe, will anything happen to the timing or general running of the car? i want to disconnect it in order of relocating it.

what u think?

No problems at all, you may have to reset your clock and radio stations, as you should disconnect your battery too.

[A-man]

y do u wana relocate it????

that doesnt make sense....

every setting on ur car is determined by some point of the engine wether it be timing, ignition valve timing everything

even in new cars theres something somewhere to work tdc etc. out

so saying this its not gonna do anything wether u take the battery out remove a few fuses or anything... u can reset ur ecu.. but thats different


im chasing a DA9 thermo fan relay if anyone has one let me know please

[tseesinngwailo]

disconnecting that should reset your ECU I would think, best to start car and let idle for 10 mins to allow it to set itself up again, this is needed if you have headers/cold intake etc

[DA9B18C]

has anyone done it just to confirm?

[SHI-FTY]

my babi for sale :'(
http://www.carsales.com.au/used-cars/private/HONDA/INTEGRA/details.aspx?__Ns=pCar_PrivateSpecialFlag_Int32%7c 1%7c%7cpCar_ImageCount_Int32%7c1%7c%7cpCar_LastMod ifiedDate_DateTime%7c1&__Nne=20&seot=0&distance=25&silo=1003&Cr=1&PriceMax=5000&Model=INTEGRA&State=New%20South%20Wales&__N=4294965322%2080%20834%20285%20257%20442%204294 965105%201216&__sid=115907D1675D&state_id=80&Make=HONDA&R=6180290&trecs=12

[DA9B18C]

hey, swap me ure tail lights??? ;-)

[A-man]

g2ic in the teg tips shows u how to reset the ecu

[Spoon DA9R]

bought a chip on ebay..they end up sending me one for bloody b16a.....

[thescotty]

HA asif youd buy a chip? which one?

[DA9B18C]

is this the same for us in Vic for engineering a new or diff motor to a car?

"as long as its from the same age or newer chassis , and is within 15 % capacity increase there is NO need to get it engineered. You only need to re assign the new engine number to your car , with an "adjustment of records" from the RTA. $32 or so.
easy."

[Spoon DA9R]

HA asif youd buy a chip? which one?

why would i lie that i bought one?

those fake mugen one..but they send me one for b16a instead...sigh...

[thescotty]

lol, how come u bought it like arent the ones on ebay shit? tell us how it goes if you ever get the right one?

[FR33K]

i bought an ebay chip for my b18 many years ago.. It didn't do much but disable my rev limit and allowed me to rev the **** off it.. If i can be bothered ill post some vids one day..

[A-man]

ny1 wana answer my q bout the relocating main fuses????


my cooler pipes having a few dramas might have the car back this week...

[DA9B18C]

is this the same for us in Vic for engineering a new or diff motor to a car?

"as long as its from the same age or newer chassis , and is within 15 % capacity increase there is NO need to get it engineered. You only need to re assign the new engine number to your car , with an "adjustment of records" from the RTA. $32 or so.
easy."

ne one got an answer 4 me? still wondering!

[Spoon DA9R]

i bought an ebay chip for my b18 many years ago.. It didn't do much but disable my rev limit and allowed me to rev the **** off it.. If i can be bothered ill post some vids one day..

hey can u gimme a bit more info about it..the one i bought he send me one for PR4..which ones do it need???

[Spoon DA9R]

my tragedy at princess tonite.....
http://i37.photobucket.com/albums/e60/SpoonDA9R/31082008063.jpg

[EKVTIR-T]

WTF!! What happened Adam?

Someone smashed side window?Theft?

[lo0se3r]

:eek: WHAT HAPPENED!?

[A-man]

i hate that least if it was a windscreen its easier to change :P


not good man





anyone got a main fuel relay that workin that they wana flog to me

[FR33K]

hey can u gimme a bit more info about it..the one i bought he send me one for PR4..which ones do it need???

PR4 is the correct one dude.
which one did you think you need ?

[Spoon DA9R]

PR4 is the correct one dude.
which one did you think you need ?

but i opened my ecu...no where for me to fit!!!


WTF!! What happened Adam?

Someone smashed side window?Theft?

went to pricess to play snooker...came down..saw this....think they try to break in to steal soemthing..but alarm went off straight away..and they would realise there is nothing they COULD steal unless they always carry a size 14" spanner on them all the time...

[EKVTIR-T]

Adam! jeez man explain what exactly happened to your car..

[Spoon DA9R]

just broke glass....tahts it...

[EKVTIR-T]

Man that sucks..
Hopefully a replacement window is not too expensive.

[kikxz]

any one rewired their foglights with a switch so it you dont have to use your headlights and switch to highbeams?
heres a pic i found

http://i19.photobucket.com/albums/b184/Integra1/WOO012.jpg

[FR33K]

kikzx... check this for fog light wiring

http://www.ozhonda.com/forum/showthread.php?t=33173&highlight=wire&page=3

[FR33K]

spoon: ive got a pic of my chip on a backup CD somewhere.. ill try and dig it up

[Spoon DA9R]

spoon: ive got a pic of my chip on a backup CD somewhere.. ill try and dig it up

ths mate! reall need ur help on this one...coz i really wanna use the chip

[kikxz]

any one know what type of leather rear seats will be able to fit in the DA aswell a leather passenger seat thanks


heres a chip i found unichip only going for $150 off some guy in the for sale section
http://www.ozhonda.com/forum/showthread.php?t=86563
instead of ebaying a chip

[Spoon DA9R]

FREEK is this wot ur ecu looks like inside?

http://i37.photobucket.com/albums/e60/SpoonDA9R/28082008055.jpg

[A-man]

unichip is good gear to...

[Spoon DA9R]

yeah but the one for sale is for b18c or b16a...

[DA9B18C]

just double checking, our headlight bulb is H7?

[thescotty]

H4 mate

[FR33K]

H4 mate

H4h ;)

[thescotty]

if u wanna get more technical:P

[EKVTIR-T]

if u wanna get more technical:P

Well he's right.
Nothing technical
Saves someone buying H4 which you wrongly suggested then finding out they don't fit and need H4h/702k... ;)

[A-man]

hey anyone used e-manage??? im lookin at buyin 2nd hand one for the da9 but duno if itll work for da9 if its off a civic with d series engine... anyone confirm if itll work??

[EKVTIR-T]

will be fine

emanage is universal

but maybe have to get a specific loom or wiring for yours..

http://www.greddy.com/products/display/?Category=electronics&SubCategory=48

[thescotty]

H4 does work? cousin bought a H4 replacement for his prelude last night and it plugged fine in my integra wen i tested his old one?

[EKVTIR-T]

H4 left H4h right
http://www.performance-angels.com/images/H4H3.JPG

[thescotty]

ok ok:P hehe smart ass:P but theyh do fit, just ones fatter and the others thinner.

[KLA80T]

hi guys! I need help...since I been in an accident, i need to replace my aircon hose, aircon fan and radiator fan... can some1 give me the correct spec for the radiator fan and aircon fan if i am going to buy aftermarket one... (just stock spec iguess... b18a auto) i went to auto barn and they said that all integra models have tha same fan... is that correct?

[Spoon DA9R]

ooo look wot i found on my bed when i got home from work!

http://i37.photobucket.com/albums/e60/SpoonDA9R/DSC01621.jpg

[EKVTIR-T]

mount it!!

[thescotty]

nice!

[ACTI0NMAN-1]

New sex toy?

[Spoon DA9R]

done...but fitment is pretty sht..gotta use tape to hold it up....sigh..not satisfied...
http://i37.photobucket.com/albums/e60/SpoonDA9R/DSC01624.jpg

[kikxz]

out of the DA9 owners in melbourne whos up for a photo shoot? just a question to see how many are interested or just get a whole integra photo shoot? lol pop some ideas people

[DA9B18C]

what lip is that? looks stock?!

im in for shoot.

[kikxz]

whos got clear indicators for the 90-92 front bar? selling cheap haha ;p

[thescotty]

ill sell em once i get the new bar if repairs let me keep them:) and yeh photo shoot def!

[Spoon DA9R]

i ahve them too but waiting for the my smoked ones to come..hahaha

i m in for the shoot


CAN SOMEONE PLZ CONFIRM FOR ME IF 89-91 AND 92-93 MODEL HAVE DIFFERENT ECU? AND IF ITS INTERCHANGABLE?

[kikxz]

ey spoon this little list might help

* PG7 : 86-89 Integra (86-87 vac advance, 88-89 electronic advance)
* PM5 : 88-91 Civic/CRX DX
* PM6 : 88-91 Civic/CRX SOHC Si
* PM7 : 89-91 DOHC ZC (JDM 'EF' ECU)
* PM8 : 88-91 CRX HF
* PR2 : 89-91 ZC (Euro)
* PR3 : 89-91 JDM B16A EF8/9
* PR3 -J00 or J51 : 92 JDM Integra B16A EF8/9
* PW0 : 89-91 JDM B16A EF8/9 DA6-XSi
* PR4 : 90-91 Integra LS/GS
* PS9 : 88-91 4 door Civic EX Auto
* P05 : 92-95 OBD-1 Civic CX
* P06 : 92-95 OBD-1 Civic DX
* P07 : 92-95 OBD-1 Civic VX
* P08 : 92-95 OBD-1 Civic D15 JDM
* P0A : 94-95 OBD-1 Accord EX
* P13 : 93-95 OBD-1 Prelude Vtec
* P14 : 93-95 OBD-1 Prelude Si (non Vtec)
* P27 : 92-95 OBD-1 EG JDM Civic 1600 sohc
* P28 : 92-95 OBD-1 Civic Si/Ex
* P30 : 92-95 OBD-1 DelSol DOHC Vtec Si/EG SiR
* P54-G31 : 1997 Honda Accord 1.8 LS
* P61 : 92-93 OBD-1 Integra GSR
* P72 : 94-95 OBD-1 Integra GSR
* P72 : 96-00 OBD-2 Integra GSR
* P73 : 96-00 OBD-2 Integra Type-R (JDM & USDM)
* P74/75: 92-95 OBD-1 Integra LS/GS
* P75 : 96-00 OBD-2 Integra LS/GS
* P2N : 96+ OBD-2 Civic HX Coupe
* P2P : 96+ OBD-2 Civic EX Coupe
* P2E : 96+ OBD-2 Civic DX Coupe
* P2M : 96+ OBD-2 NZ Civic SOHC VTEC
* P2T : 99+ OBD-? Civic Si Coupe
* P5P : 97-00 OBD-2 Prelude Type-S (JDM ECU)
* PBA : 97+ US Acura 1.6EL
* PCT : 98+ JDM ITR / CTR
* PCX : 99+ OBD-? S2000

[kikxz]

also with the shoot do you think we should just make it a integra shoot and all of us DA9'z just take our own little shoots then join in to the rest? what do you guys reckon?

[Spoon DA9R]

i think we can just do a DA only one hahahah

thx for the list..really helped

[Samm928]

have a da9 melb meet.. i had one about a yr ago in sydney lol :)

[kikxz]

alright hehe we'll just make an EXCLUSIVE DA only meet :P i wanted to do one ages ago but it was just me and scotty that said yes to it in the upcoming events area.. so when do you guys reckon you'll be free

SpoonDA9
kikxz (me)
DA9B18C
thescotty

who else is in this forum thats in melb that has a DA that wants to go for a photoshoot?
come on there has to be more than just 4!!!what about you ACTI0NMAN-1 you up for a photoshoot with your DA

[Spoon DA9R]

fk...gonna sell the chip...realise i did buy the wrong one..hahaah..anyone with 90-91 DA want it?

when is the shoot? i need some time...getting ready for track so gonna be busy...

[kikxz]

the shoot can be whenever man if its just us 4 or someting then its no worries whenever it suits everybody

lol and what exactly was the immo mugen ecu meant to do lol chuck in more fuel? to increase power

[DA9B18C]

anytime in 2 weeks is good for me, not monday night though, got b-ball

[Spoon DA9R]

the shoot can be whenever man if its just us 4 or someting then its no worries whenever it suits everybody

lol and what exactly was the immo mugen ecu meant to do lol chuck in more fuel? to increase power

on the site it says increase power curve, increase rev limit to 8200

i know Clint (EKVTIR) will come hahaha
too bad Joey (180SX) is already back to hongkong

[kikxz]

lol do Clint and Joey have DA's¿

[Spoon DA9R]

yeah clint has a grey one...one of the smoothest DA i've driven..

joey have a ghetto b16a....the one selling now

[kikxz]

ohh with the plates b16 if im thinking of the right one

[exodus]

did any of you guys out there faced Alternator problems? I did for mine. Crap. And i just change the the alternator less than 1 year ago. Sighhh!!!

Does any B18 Alternator fit to our Da9?

[Spoon DA9R]

STICKER DONE!!!!!!!!!!!!!!!

http://www.ozhonda.com/forum/showthread.php?p=1880826#post1880826

fitted another bumper on car...and front lip screw on properlly,,,rolled guards....
gotta fix my number plate part properly....
http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/05092008064.jpg
http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/05092008066.jpg

[Samm928]

hey guys technical question.
if i change my b18a to a b16a
do i just need the long block, ecu, ecu harness, dizzy, vtec solenoid? to get everything up and running? would i have to change any belts, manifolds blah blah blah? hope someone gets bakc to me soon. also. how much would it costed me if i registered it with the rta?

cheers guys


samm

[Spoon DA9R]

intake manifold is different

u mite want to get the short gear ratio gearbox tahts for sale now...otherwise ur car's pick up from the lights will be slow...

[Samm928]

if i get the b16a, do i need to get new wiring looms or can i use the same ones?
and if i get new looms do i still need a ecu conversion harness to get to OBD1 as i am OBD0??
or
if i get new looms i can just go straight to OBD1 without a harness?

cheers.

[DA9B18C]

u wont need new looms if u get a harness, thats the point of the harness. if ure serious, let me know i have an obdo to obd1 harness i bought for my conversion that i never ended up using. i got it from edgeautomotive

[DA9B18C]

Ure car is looking wicked Adam! keep it up.

[FR33K]

you dont need to convert to obd1 for a b16a
use existing loom and add the 4 wires for vtec solenoid, oil pressure switch, knock sensor, and the 2nd o2 sensor (i think)

[DA9B18C]

but the original ecu wont be vtec? just wires to run vtec?!

are'nt non-vtec ecu's and vtec ecu's diff???

[FR33K]

use obd0 vtec ecu i.e PR3

[mooshie]

you have to change the ECU, but if you have an OBD-0 B16a then you can do just as FR33K says, no need to change the entire loom.

[thescotty]

hey thinken of getten alarm installed at autobarn, possibly chirnside autobarn, does anyone no if autobarn do a good job and if they will do the extras other then the immobilizer and the alarm? cheers

[Spoon DA9R]

man i worked so hard on the stickers...now only 4 ppl emailed me for the stickers???

[wkdteg]

or u can do wat i did and get addition parts for ur current ecu... to turn it to the proper vtec 1... then get an aftermarket unit (s200) to run it all... make proper use of that b16 under the hood

[Samm928]

andrew, when i do the conversion wanna spend the weekend at my place helping me out ? :)

[A-man]

car looks mint man... can u pm me details of sticker i didnt know they were rdy i will take em

[A-man]

aw yeh btw....

got my car back from exhaust shop all good ill post pics tmrw for u all.. im very happy with it i have a 2.5 inch system with plumb back gate.. for under the radar effect...

[FR33K]

andrew, when i do the conversion wanna spend the weekend at my place helping me out ? :)

if you asked me 5 years ago i woulda said yes lol but i even got rid of my DA coz i have no time for it anymore ! even on the weekends !
too much work and study to do sorry

[A-man]

check my thread for more pics (new ones of turbo setup)

[kikxz]

just some pics of my teg on kings springs and my little front lip

http://img134.imageshack.us/img134/3/dsc01337fr4.th.jpg (http://img134.imageshack.us/my.php?image=dsc01337fr4.jpg)http://img134.imageshack.us/img134/2713/dsc01338ox4.th.jpg (http://img134.imageshack.us/my.php?image=dsc01338ox4.jpg)http://img134.imageshack.us/img134/4237/dsc01339sn8.th.jpg (http://img134.imageshack.us/my.php?image=dsc01339sn8.jpg)
http://img134.imageshack.us/img134/2338/dsc01340dy7.th.jpg (http://img134.imageshack.us/my.php?image=dsc01340dy7.jpg)
http://img134.imageshack.us/img134/8553/dsc01341px0.th.jpg (http://img134.imageshack.us/my.php?image=dsc01341px0.jpg)
http://img134.imageshack.us/img134/1204/dsc01336qr1.th.jpg (http://img134.imageshack.us/my.php?image=dsc01336qr1.jpg)

[thescotty]

nice man! hoepfully i can keep the clear indicators for you ;)

[kikxz]

sweet as scott hopefully you do lol did you order the da sticker yet?

[Spoon DA9R]

just had a call, for those that order its already in making..will be ready to be picked up on sat ( after i get my car stuff done) and for those interstate i'll be posting on monday!

[Spoon DA9R]

heeheh i know i m not suppose to show things thats not mine..but i have to show this..

borrowed my friends rims for a few days.....

now i m in love..tryign to get him to sell it to me.....

http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/withP1.jpg

[A-man]

that looks hot i love the head lights... i wish i couldve found them when i bought mine only diff is mine has that buldge in them...

[FR33K]

stop showing me pictures of your car !!! it makes me miss mine !! :(

[ACTI0NMAN-1]

stop showing me pictures of your car !!! it makes me miss mine !! :(
You turned your back on the DA, so you willl be haunted forever !!!

[180sx]

heeheh i know i m not suppose to show things thats not mine..but i have to show this..

borrowed my friends rims for a few days.....

now i m in love..tryign to get him to sell it to me.....

http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/withP1.jpg

ricky's P1?

[Spoon DA9R]

ya just borrowing them LOL

[Runt]

offset looks a lil too low...

bit of camber might fix that though!

[A-man]

offset cant be changed by camber... if u changed the camber on those wheels to fit em in them wheel arches u wouldnt have any tread on the rd it would b riding on sidewall :P

[Runt]

ok chillax...

ok leave the camber..... flare the poop out of your guards and slam it!!!

stand back and fap..... or get in drive around and watch everyone else fap;)

or you could try and find p1s in a more suitable offset like +35...
obviously the more mature and sensible option out of the two...

but then again, you have the rest of your life to be sensible!

[Spoon DA9R]

i m only borrowing them..gotta give them back today...nooooo

[kikxz]

any one ever see a DA with a single touring wiper? ive been wanting one for ages it looks bloody hot any one know if theres one that fits or where to get one?

[Paul1985]

Anyone here done an LS/Vtec swap on their DA9?

[A-man]

APPARENTLY u can use the later model civic wipers and make them backwards u know how the civic works like / \ and move away from each other... all u need is the motor off the later civic and then it works its on g2ic it sounds alrite


yeh no one wants to be sensible....


theres a few people who have done them... but i think u should justify the cost of a b18c and the conversion coz i looked at it and the work... u need to know ur stuff to be able to do it...

i priced frnt cuts cheapest i could find for dc2 vtir was 2700

now when i went to just get PARTS to do a conversion it was 800-1k for a head
200 to 600 for a ecu
gasket kit for 200-400
new seals
weld oil gallery up..
etc. it was alot of work for what it was... and then its just easier to put a new motor in...

[thescotty]

pritty sure 'sikisdr69' has an LS/VTEC conversion cause in his name it says LS/VTEC 145.6KW etc.....

[Paul1985]

APPARENTLY u can use the later model civic wipers and make them backwards u know how the civic works like / \ and move away from each other... all u need is the motor off the later civic and then it works its on g2ic it sounds alrite


yeh no one wants to be sensible....


theres a few people who have done them... but i think u should justify the cost of a b18c and the conversion coz i looked at it and the work... u need to know ur stuff to be able to do it...

i priced frnt cuts cheapest i could find for dc2 vtir was 2700

now when i went to just get PARTS to do a conversion it was 800-1k for a head
200 to 600 for a ecu
gasket kit for 200-400
new seals
weld oil gallery up..
etc. it was alot of work for what it was... and then its just easier to put a new motor in...

Building it is the fun of it though :)
You would also need a fair few other bits n pieces...
head studs
rod bolts
bearings
fluids, oil and gasket sealer etc
labour costs for outsourcing
various specialty tools needed
+ more most likely

Sounds like quiet an expensive swap. I wonder what performance vs. a vtir b18c would be like.

Wonder what the cost would end up looking like if you were do go an ls vtec build using new aftermarket pistons, camshafts etc in the process

If the price is similar to a vtir halfcut in the end, then with this swap at least you have a freshly built engine... thats depending on how you view the reliability arguments of this swap.

[wkdteg]

i considered it a few yrs ago when the engine on my old da was on its way out...
i remember speaking to a few people about getting it done, then realised it would b alot better to do a straight b18c conversion, and just work on that.
but u seem like the kinda guy who enjoys the work and the challenge of it all... so i wouldnt put the whole thing past ya. let us know what you decide

[Spoon DA9R]

anyone with a stock DA cat i can borrow?

[thescotty]

i do...but for how long:P

[Spoon DA9R]

jap spec have b18a????

do u mean b16a....not much point for us to just change to a b18a jap spec when we already have a b18a aus spec...

[thescotty]

anyone got a better lip to put on my 90-91 front bar, like that bulky oem style one thats rare or something better! cause doesnt look promising that ill get the 92-93 bar back:s cheers guys

[A-man]

yeh but most people i know who are associated with hondas arent mechanicly minded and arent into DIY this is why a conversion is easier.... and for me i can do that stuff but i wouldnt because of the cost....


it also makes it a 'bastard' engine.... its got bits from everywhere....

and heads r expensive and as hard to find as a frnt cut...






each to there own...






milly im chasing some parts atm.... just small interior stuff do u have the part in between the dash pad and the windscreen in good condition??? i would really like one... if its black i would like the boot plastics to...

[Paul1985]

yeh but most people i know who are associated with hondas arent mechanicly minded and arent into DIY this is why a conversion is easier.... and for me i can do that stuff but i wouldnt because of the cost....


it also makes it a 'bastard' engine.... its got bits from everywhere....

and heads r expensive and as hard to find as a frnt cut...






each to there own...






milly im chasing some parts atm.... just small interior stuff do u have the part in between the dash pad and the windscreen in good condition??? i would really like one... if its black i would like the boot plastics to...

You are right.
I find it a hobbie and a challenge. I guess thats why i'm an aprentice mechanic. I think if i hadnt had a few years experience and done all the schooling i have i would never even consider an engine build, even an engine swap would be a difficult option as i dont think i would have had the confidence in doing such a thing. I'm just looking into it at the moment as i have other things to finish first, not to mention the cost involved.

It can cost upto and around $7000+ from the research ive been doing to get all the components you need. Thats including the cost of a head and pretty much everything internal brand new... pistons, rods, cams, valves, valve springs, retainers, cam gears, outsourced block and head for work, all new gaskets and belts, fluids/gasket maker etc, bearings, studs/bolts, new pumps, injectors, plugs, new IM and TB, headers ECU etc etc..

Thats a pretty much all out build which would make a brand new engine built by yourself.
It could cost a hell of a lot cheaper if you dont want to upgrade the cams/valvetrain and use the LS rods and get cheaper pistons etc etc.. You could definately come close to halving that cost by using cheaper parts.

[A-man]

yeh im an apprentice to but im a plant mechanic more money for bigger machines :P

engine conversions r really easy for hondas. and if u look at a few and get familar with the cars u will work that out... eg and eks r the best for it... there SOOOO robust its great

[thescotty]

http://i280.photobucket.com/albums/kk169/thescotty89/20092008-1.jpg

oo yeh i got sticker to :) ive cut around it now, so doesnt look shitty!

[wkdteg]

LoL actually doesnt look too bad :thumbsup:

[Spoon DA9R]

u pill off the clear bits u idiot! lol

[A-man]

some mothers will have em :p


finally put a avatar on nice

[thescotty]

yeh i took the clear shit off this morning cause i was leaving it to stick as it was raining! cheers mate!

[180sx]

those P1 are for rwd (S14 P1) i reckon they look sick on FWD too

[EKVTIR-T]

looks rice Joey lol

[Spoon DA9R]

i love them!..but..i m thinking of going back to 4 studs...joey..can i take ur break set up?

[byteme]

finally got on here guys will try and get a pic up of my car

its a white 1990 da9 that has been the victim of a b16a transplant skunk2, coilovers, and shortly a 2.25 ehxaust system. need to get the sucker on the dyno lol.

other car is a toyota supra ma70 with a 2jzgte swap with a t-70 turbo and all the jewlrey. this ones being build for the track the honda is my daily driver.

Ez

[A-man]

finally got on ez good one...

howd u go with the b16?

[byteme]

still sounds like it has marbles in it lol





damn marbles

[Spoon DA9R]

another day at winton.....did better than last...still not gd enough....sigh...

i had to buy the photos..won't give me soft copies...so had to scan it with my ditry old scanner...

http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/Winton%2028-09-08/DA1.jpg
http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/Winton%2028-09-08/DA2.jpg
http://i37.photobucket.com/albums/e60/SpoonDA9R/My%20BLKSTN/Winton%2028-09-08/DA3.jpg

[A-man]

very cool man hey

[tseesinngwailo]

Hi All,

I have a 1991 DA9 Integra with a B16A, complete with the JDM wiring looms, and I believe, a OBD1 ECU, can anyone tell me where the plug is that needs to be shorted so that I can check/adjust the timing? it's never been done since my conversion, and I just want to check.

Thanks

Tseesinn

[Spoon DA9R]

http://au.youtube.com/watch?v=saiKVR2jqWg

turn ur volume down before u start playing it...

its very slow..still haven't got the car set up the way i wanted it yet...hopefully by december it will be fully ready...

[Riced_Civic]

man that exhaust and raspy.

sounds kool tho

[A-man]

tseesin what timing are u talking about??? ignition??? or cam? both of these can be done with either the timing marks on the pulleys or with the dizzy and a timing light....

the only timing controlled by the ecu is ignition timing... and the advance for the ignition..

but the plugs r under the glove box.


the ecu is under the carpet on the same side.


a bit of constructive critism on the laps.. u shouldnt back off the throttle on and off mid way around a corner dnt let the throttle on til u know u wont have to get back off it....


just somethin to think about

[tseesinngwailo]

Hey A-Man, was talking about the ignition timing, but ECU-Man has answered it i think, I just wanted to check my ignition timing is where it should be.

Cheers, Tseesinn

[tseesinngwailo]

Spoon DA9R, congrats on getting out for some track fun, the car looks and sounds great

[kikxz]

guys what do you thinkg about reseting springs? im thinking of resetting(compress) my king springs lows (rears)cause i just called up a place($60 bucks for rears) and they said its not such a good idea because its FWD. What do you all think?

[A-man]

how much r new ones??? i dont think theres anything wrong with it.. is that 60 bucks removed reset and then refitted? thats not a bad price but i thought a set of springs were only a little more then that fitted... i know the tyre places around in perth charge around 300 350 for new springs.... and fitted

[kikxz]

oh nah ive already got king spring lows in my car but im not to happy with my rear height. Thats $60 for me to take out my rear springs and to hand it over the the guys and then they reset the spring rate or whatever they do. If they took it out reset it etc and done it again it would be around 120ish

[byteme]

Hey A-Man, was talking about the ignition timing, but ECU-Man has answered it i think, I just wanted to check my ignition timing is where it should be.

Cheers, Tseesinn


plug you were looking for is the gray plug near the heater blower its got a grreen and white wire and a brown wire.

if you car is a genuine xsi it should be obd0 (look for the pr3 code on the ecu)
the only 1st gen b16a in the integra was the b17a which only the americans had. that motor was obd1, but even then that was pretty rare.

ez

[tseesinngwailo]

http://www.team-integra.net/forum/display_topic_threads.asp?ForumID=15&TopicID=152266&PageMsg=Viewing+Common+Topic
Hey All, in regards to finding info on how to set the ignition timing on a B16A Integra, found the above link, has a great walkthrough on doing it.
All credit goes to Team-Integra.net

[Milly.JDM]

hey man im located in te parramatta area

[prego]

well i lost my licence and im looking at selling or wrecking for parts my da9

heres a few details

body is not exactly great photos do do it justice and there is a bit of damage where i barina hit me on the rear passenger side

interior is in average condition

chassis has 250 000 ks

motor has 180 000 and was put in 10 000 ks ago

in the 12 months the water pump, alternator, driveshafts, leads, distrubutor, and basically every external engine accesory as i cant remember them all

any questions feel free to ask ill try and keep on top its got a sound system and all the young person shit

id be looking for around 1200 as is

http://i74.photobucket.com/albums/i270/sos-rusty/Image073.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image064.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/IMG_1489.jpg

[Runt]

what yr is it?
im after the rear bumper off a 93, if it survived the hit let me know.

[mooshie]

I am after a driver side rear taillight, any of you guys parting out got one?

[FR33K]

mooshie ive got a tail light but i cant remember which side it is.. ill check for you tomorrow

[mooshie]

needs to be a 89-91 style not the 92-93, sorry should have put that before..

[kikxz]

for those who are in melbourne that want a DA meet/Photoshoot can you put up your expression of interest on this link thanks


http://www.ozhonda.com/forum/showthread.php?t=99402
or if your in sydney or interstate and you want to travel down to melbourne your more than welcome :)

[thescotty]

i wanna see some turbo DA's! im very interested!

[prego]

some more pics and because i forgot to mention im on the southside of brisbane

http://i74.photobucket.com/albums/i270/sos-rusty/Image081.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image082.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image083.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image085.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image086.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image087.jpg

http://i74.photobucket.com/albums/i270/sos-rusty/Image088.jpg

it really needs a good clean sorry about phone pics

[wkdteg]

got a quick one for you guys...
need new brake pads (front and rear), im looking at the bendix range, ultimate for rear and heavy duty for the front.
im not quite in the know when it comes to brake pads... has anyone tried any that they would recomend?
keep in mind the car is driven normally most of the time with the occassional spirited run every now and then.

[thescotty]

what spark plugs do people recomend and spark plug leads?

[wkdteg]

ngk... they do alright

[A-man]

i got bendix and i dont look back

very good pads done a track day in em and there not badly priced...

when i buy new ones im gonna get the ones off ebay.. (check them out cross drilled and slotted brembo rotors with pbr pads) for 280 bucks

each to there own just seems cheap for me


im using iridium plugs and i got cheap 10.2mm leads off ebay

otherwise factory honda ones r good to.


the reason i buy things like 10.2mm leads and shit is that its cheaper from the states, i got msd external coil so its a little stronger aswell.. the plugs were because im lazy... thats all otherwise id use honda ones

[thescotty]

are iridium much better, people say they are? and wats the stock leads in mm's? i to am thinken of getten the msd kit but not sure if i really need it.

[wkdteg]

im not sure if this is correct, but dont the irridium have a shorter life span?

anyone else on the brake pads?

[kikxz]

ive got bendix General CT's up front they can slow the car down fairly quick but the downside is that bloody to much brake dust but never the less safety first i guess haha and yeah id recommend going with bendix

[wkdteg]

sounds like bendix are the way to go...
has anyone tried the heavy duty or ultimate varients?

A-man... have you got a link to the ebay items?

[A-man]

yeh ill find the link

i think stock leads r bout 6mm... but i cant member off the top of my head i know when i put em on i went FARK there huge u know...

nah iridiums r good for 100,000kms stock spark plugs r only good for 10-20,000kms

i didnt get any diff from the iriduims but like i said im lazy.. (must b coz im a mechanic or somethin :P)

ill grab the link now... its up to u i find my bendix pads r alrite with brake dust but i only had em on for a few months and i kept the car clean even if it dnt look like it atm :P

[A-man]

http://cgi.ebay.com/ebaymotors/90-93-Acura-Integra-DA-BRAKE-ROTORS-Axxis-PBR-PADS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a 1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem320302784832QQitemZ32030278483 2



other shit

http://cgi.ebay.com/ebaymotors/90-93-Acura-Integra-DA-BRAKE-ROTORS-Axxis-PBR-PADS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a 1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem320302784832QQitemZ32030278483 2

http://cgi.ebay.com/ebaymotors/Acura-Integrhttp://cgi.ebay.com/ebaymotors/Acura-Integra-90-91-92-93-F-R-Brake-Rotors-Pads_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a 1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem250297217836QQitemZ25029721783 6

[thescotty]

so all in all where and how much are the iridium spark plugs i need, and the leads ebay u recon? i think thats what will fix my lil problem.

[thescotty]

will these do?
Spark plugs:
http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__92-93-ACURA-INTEGRA-1-8-NGK-IRIDIUM-IX-SPARK-PLUGS-KIT_W0QQitemZ260294423787QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item260294423787&_trkparms=72%3A543%7C39%3A1%7C65%3A12%7C240%3A1318&_trksid=p4506.c0.m245

Leads (blue or red ones?):
http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__90-91-93-ACURA-INTEGRA-10MM-SPARK-PLUG-WIRE-RS-LS-GS-92_W0QQitemZ120312627269QQadnZCarQ20Q26Q20TruckQ20 PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem? hash=item120312627269&_trkparms=72%3A543%7C39%3A1%7C65%3A12%7C240%3A1318&_trksid=p4506.c0.m245

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__90-91-92-93-ACURA-INTEGRA-DOHC-10mm-SPARK-PLUG-WIRE_W0QQitemZ350104479256QQadnZCarQ20Q26Q20TruckQ 20PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewIte m?hash=item350104479256&_trkparms=72%3A543%7C39%3A1%7C65%3A12%7C240%3A1318&_trksid=p4506.c0.m245

[A-man]

yes they will fit.

i duno if its worth upgrading the lead size but its cheaper then honda ones so y wouldnt u


whats the problem??? idle?

did u clean out the iac valve???

[thescotty]

to be honest..couldnt be ****ed:P i will find a day to take it all apart though lol which actual part am i taking off can u show a pic of it circled? also just like wen i put the foot downit lags like it goes then sorta doesnt go then gooes kinda thing, hard to explain, like it goes then lags then goes if u no wat i mean i think it is the spark plugs cause i havent changed them over for a while, plus the other day i put the foot down it wen then basicallyt lost power for a second then went......

[Paul1985]

to be honest..couldnt be ****ed:P i will find a day to take it all apart though lol which actual part am i taking off can u show a pic of it circled? also just like wen i put the foot downit lags like it goes then sorta doesnt go then gooes kinda thing, hard to explain, like it goes then lags then goes if u no wat i mean i think it is the spark plugs cause i havent changed them over for a while, plus the other day i put the foot down it wen then basicallyt lost power for a second then went......

Sounds like you may need a new fuel filter.

[thescotty]

how much? and whats a good one for a decent price also where from haha? cheers mate...ill get both sparks, leads and fuel filter..

[A-man]

yeh nah its not the fuel filter ive done mine.... it still does it to...

its jsut on the back of the manifold... u should look it up... its on my other computer a full layout of it all. tere a pain on the tegs u need a weird size allen key

but do the filter to... its worth doing i got my fuel ecconmy bak from doin it...
my mate got 10hp gain from a blocked filter lol on a supra :P

[thescotty]

so what is it im looking up?

[A-man]

iac valve

[thescotty]

cheers dude, also how much is a replacement honda fuel filter or is an autobarn one or whatever alright?

[thescotty]

found this for others who want to do the iac valve like me
http://www.honda-tech.com/zerothread?id=1575913&page=1
correct me if thats the wrong thing aman..
also waht did you use to clean it? cheers mate

[Samm928]

carby/ throttle body cleaner.

[DA9B18C]

hey, will a h4 HID kit fit our headlights? i think someone fitted a h4 bulb and said it worked.

is this right?

[thescotty]

yeh i had h4 bulbs the bracket thing u clip over the globes to hold them in place wont work though, but they still worked!

[lo0se3r]

We use H4H bulbs, similar to the H4 only 2 of the 3 arms are smaller.

[thescotty]

but the H4 still work :P

[thescotty]

Got it off, sprayed it, lost gasket! GRR!

[thescotty]

car all done, gasket found!

[wkdteg]

H4 will work... i put them in a couple of yrs ago, but i had to modify the head light casing to allow them to fit correctly. ill c if i can dig up sum old pics of the results. pm me if u want them

[A-man]

yeh thats all good man u should make sure the valve will move in the housing... but thats a good site the one i was thinking to

do HID produce heat??? if so u may wana make sure if h4 and h4h arnt to close to the lens because it may melt it

i know for a fact the vt commodores with the aftermarket headlights u can melt them if u dont have them aligned properly

[DA9B18C]

wicked-for the HID question, now to a more serious one!

how can i clean my oil sump if it somehow got water in it while off the engine?
will straight degreaser and elbow grease work or will the water just evaporate with the heat from the oil while the engine is running?

im not talking alot of water but maybe a 1/2 cup max?

[A-man]

can u get a robowash???

coz it heats em up to 80 degrees and then itll dry up....

coz otherwise its not alot of water... just empty it then put it on....

its not a huge problem the water will evaporate and leave out ur pcv anyways... its not aot of water...

[A-man]

my celica like u wanted pics before

http://aaron.iconiancds.com/pictures/painted.jpg
fresh out the paint shop
http://aaron.iconiancds.com/pictures/celica-edit.jpg
at the park around the corner


got heaps more but my comp playin up ill show u later

[thescotty]

dump it

[DA9B18C]

wicked!!!!!!

[string]

I'll pay that, great looking car. Leave it that height, looks like a great daily driver.

[A-man]

nah its not i just havent had time to lower it... the shocks r stuffed to so its not the best handling car either

[kikxz]

damn A-Man thats a clean ride congrats

[string]

I wouldn't have expected it to handle well even with good shocks. RWD does not mean good handling, it means the power drives the rear wheels lol

[A-man]

i never said it would handle better.. but stuffed v good shocks is a big difference... plus the car has wider then stock tyres..

[mooshie]

For those that know me, I have been talking about this for 3 years, finally some action..


New parts from the US and here-
10133


Turbo installed, had to slightly trim the block but it got in there beautifully. Dont mind my leaking cam cap, got a replacement, just gotta fit it!
10136

Oil return, nice and short, and straight too.
10137

The install is complete now, but I don't have any pics of the completed setup yet.

Thanks to the guys down at Performance Exhaust at Northmead for a beautiful job and in a short timeframe too. your efforts are much appreciated guys!

Car is currently getting the fuelling and management side of things sorted out and we will be ready to go!

[A-man]

where did the parts come from who in the states? from spoolin?


i love it u get to keep a/c except if it was me i wouldve used my intercooler... but each to there own hey

love the gauges i wanted to do that to mine but i couldnt get the din the right size to fit... u get that none the less very good man what size exhaust have u got????

i could only fit a 2inch til the sump then 2.5 inch

[mooshie]

manifold is second hand bought here, for the life of me I cant remember who makes it. Turbo is locally sourced GT2860RS all the little bits and pieces ate from ATP Turbo.

Your intercooler is a nice setup, but I didn't want to fluff around with the radiator etc.
DIN panel is just a metal item from Just Jap, had to trim the metal sleeve that the radio fits into and shaved a bit of the plastic at the top and bottom of the hole it all fits into. not too much of a hassle and it fits nicely. Gauges are 52mm (I think) not the more common 60mm.
After the cat at the moment I am running 2.25 to the muffler with twin 2" outlets. I want to change the bodykit so will do all this to 2.5" then.

[mooshie]

BTW on the air con fan in our cars, the smaller one on the passenger side, which is the positive wire and wich is negative? I would assume blue is positive, but assuming can make a mess sometimes... Can someone check it for me? I can't access the car at the moment to do it myself.

[thescotty]

hey does anyone here have a white da with side skirts,lip and rear skirts, altezza lights and very clean?? was down on beach road blackrock today???

[A-man]

it doesnt matter.. because the windings in the fan will determine the direction not the polarity of the wires but easiest way to check is check continuety between both of them...

so connect one to the car body or neg terminal and one to the wire, then if u get continuety then thats the negitive... u can double check this by doin the same but change it to volts and one will give u volts the other wont..


otherwise tmrw ill check for u the wiring.. and let u know

[kikxz]

hey guys what type of HID kits do you have in your DA's without changing the headlight housing etc? if there is any

[jforsta]

Hey thescotty! That was me :) Thought I saw a nice black DA on my cruise, was that you mate? Love that road on a sunny day :D



hey does anyone here have a white da with side skirts,lip and rear skirts, altezza lights and very clean?? was down on beach road blackrock today???

[kikxz]

FUKKKK GUYS ive had LO n SXC car all along and i just found out today!!!!! :D

[thescotty]

ey yeh jforsta was gonna wave u wernt looking! haha...nice car man its realllll clean. cheers...

[thescotty]

was very bored around 5 mins ago and went out to the lil shed we have and found some shit my brother was using to make a lip on his car, he only left aprox 1.02 or so metres lol..took it to my car and felt liek making some shitty lip for it as im bored of the original one.. saw my mate do it so i though why not, screws stanley knife and drill........ and this is wat turned out.(probz cant see it its just some lil small parts on the side.

http://i280.photobucket.com/albums/kk169/thescotty89/lip.jpg

i know its not great and looks stupid haha but ahwell its not my lip and im not haven it for much longer :p

[lo0se3r]

nice DIY lip scotty, is that from the cd5 accord?

ARHH i need a lip jforsta where did you get yours?!?!?

[thescotty]

nah just ad ons lol...its the stock 90-91 lip (wrong one the repairers put on:( ) with the stock lil spoiler...then those 2 side add on things..just shit my brother used on his car.. but yeh in that pic it does look liek the cd5 haha :P

[A-man]

those badges dont really suit the car but.. just my opinion more pics on my turbo setup with rocker cover painted and that...


HID kits might fit ill let u know because im doin it to mine... i got the same headlights as thescottys but....


they should do but theres enough room to fit the box and that so it should b ok

[thescotty]

i got hid on those headlights, there good.

The badges look good in person imo :P also its different :)

also are those lights road worthy does anyone know? not hid but the headlights i have, i wouldnt see why they wouldnt be?

[A-man]

there ok...

i duno bout hid in them though....

[kikxz]

yeah A-Man when you get some pics of the headlights with your Red DA upload them here im not sure whether or not they will suit my red

[A-man]

danau on wahonda has em and they look alrite here ill send u a link

http://wahonda.net/
in cruises or something

[thescotty]

theres a maroon da at uni that has them.

[Runt]

Hey Guys

Ive Been waiting to get my car sprayed for the last couple of months, reason im waiting is cause im having dramas finding a series 2 rear bumper! I never thought it would be such a ball breaker!!!

Ive tried the local honda parts guys they tell me they get em all the time! Bollocks!! every time I go in they tell me they only have the 89 90 when I look at em they look like dirt!! (damaged)

what to do what to do??

[A-man]

ive got a perfect one in my shed its off my car i got a body kit now coz of the cooler.. im in perth

[thescotty]

do u still have front bumper on ur car or body kit?

[A-man]

nah bodykit on front

gotta do the rest.. but i will once i got it on the rd its just easier to transport that way

[Runt]

A-man...
you have a pm!!

[A-man]

yeh i got to pms... ill address both here... i dnt wana get rid of front bar just yet i need to get the car driving so i can tune it on the street...

as for the frnt bar find out how much postage is for me im hell busy atm

[thescotty]

u confused me, ull send front bar or not haha?

[Runt]

do i need your post code?

[lo0se3r]

has anyone cut/snipped H4 bulb arms to fit in our stock H4h headlights?

trying to find H4h HID's but its seems like they ran off to see the wizard the wonderful wizard of OZ! :(

[jforsta]

Hey thescotty woulda waved for sure if I saw you but I think I was too busy looking in the rear mirror at your rides headlights.... niiice :)

lo0se3r got my type-r lip from www.hmotorsports.com for about $190 shipped. My experience wasn't the greatest, the lip came with 2 nasty cracks and the fitment was pretty average - had to pull a few sneaky tricks to get it to fit. HAppy to post pics for ref if you need. That said delivery was fast.



nice DIY lip scotty, is that from the cd5 accord?

ARHH i need a lip jforsta where did you get yours?!?!?

[kikxz]

hey lo0se3r
H4H H.I.D kit
i came across these there seem to be a few around the US but cost a fair little penny
http://www.ttlmotorsport.com/product.php?productid=19037
http://cgi.ebay.com/ebaymotors/H4H-SUPER-SLIM-HID-CONVERSION-KIT-FOR-JDM-HEADLIGHT_W0QQcmdZViewItemQQcategoryZ36476QQihZ010 QQitemZ200261742918QQrdZ1QQsspagenameZWD2V
http://cgi.ebay.com/ebaymotors/HID-FREE-SHIPPING-BIXENON-CONVERSION-KIT-H4H-L-H13H-L_W0QQcmdZViewItemQQcategoryZ36476QQihZ002QQitemZ1 20316139805QQrdZ1QQsspagenameZWD2V

[FR33K]

Hey thescotty woulda waved for sure if I saw you but I think I was too busy looking in the rear mirror at your rides headlights.... niiice :)

lo0se3r got my type-r lip from www.hmotorsports.com (http://www.hmotorsports.com) for about $190 shipped. My experience wasn't the greatest, the lip came with 2 nasty cracks and the fitment was pretty average - had to pull a few sneaky tricks to get it to fit. HAppy to post pics for ref if you need. That said delivery was fast.

those pricks didnt even send me my lip the first time i bought it
money down the drain and there was nothing i could do about it

i ended up getting it from... http://www.streetstyler.com/

[FR33K]

jforsta.. have you got a bigger big of your car ??

[jforsta]

Yeah I wouldn't buy from them again actually. Can't believe they didn't even send you goods! That's rough mate.

Some pics for you guys - bit of a progression series. Obviously only visual changes apparent here but lots of other fun stuff going on "behind the scenes" :)

http://www.fuzzytv.com.au/TEG/Stock_1.jpg

http://www.fuzzytv.com.au/TEG/Skirts_2.jpg

http://www.fuzzytv.com.au/TEG/Bar_3.jpg

http://www.fuzzytv.com.au/TEG/Lowered_4.jpg

http://www.fuzzytv.com.au/TEG/Lip_5.jpg

Plenty more where that came from.

If only the Aussie dollar would pick back up I could continue building :)

[thescotty]

did u buy it from a lady in beaumaris? also what rear lip do you have on it?

[jforsta]

Nah bought it from a young family in Malvern who only had it for a couple of weeks before they realised they had over-extended themselves finacially.

Rear was damaged when I bought it and 92 rears are frigg'n expensive to buy so I put on a different one (and ended up paying more LOL). Think it was called "extreme-bar" . Kinda bit much but it's grown on me lol. Plus the line worked with my sides so that was cool.

http://www.fuzzytv.com.au/TEG/Ass_6.jpg


This one was taken before I lowered her and with old twin stock exhaust with extra rust for improved rattiness :P

[lo0se3r]

^^^ looking good, are those mugen rep side skirts? also where did you get them? and how many inches did you drop it?

thanks Kikxz for the heads up with the HIDs, looking into those sites for those front lips thanks jforsta and fr33k, *sigh* need the aussie dollar to pick up cant afford these things!

[thescotty]

OK someone here has the same colour as me "black" with the same headlights as me, WHO is it! :p asif someone has the same :(

[FR33K]

theyre EK civic sideskirts

[Spoon DA9R]

http://www.fuzzytv.com.au/TEG/Lip_5.jpg



nice..damn i miss the white

[thescotty]

im trying to get some ek skirts to:) And spoon blacks good:)

[Spoon DA9R]

i've got a pair at home....just never could be fked putting it on

[A-man]

to ek sides fit? like bolt on?

i had an idea maybe it would b easier to converse over msn or somethin most nights or something...

[thescotty]

have our own msn group that...maybe a ozhonda chat room for quick discussion :)

[A-man]

add me aaron@iconiancds.com take it from there

[lo0se3r]

arnt ek side skirts, cut to be able to fit?

[thescotty]

yeh but nothen a diy cant help

[Ashwee]

Yes. Involves some trimming but mostly works.

PS you stole my headlights scotty

[Ashwee]

Also:
http://g2ic.com/forums/showthread.php?t=147710

If you go through that thread, some people have posted up how they mounted their EK skirts on.. I was gonna do them till I picked up a set of OEM DA sides.

[deezsta87]

hey all just wondering who drives the maroon da wif rear lip n ek sides around deer park st albans area

[thescotty]

could it be kikxz
http://www.ozhonda.com/gallery/showgallery.php?cat=500&ppuser=18200
??

[IZY-10]

hey all just wondering who drives the maroon da wif rear lip n ek sides around deer park st albans area

is it my old car??

http://i226.photobucket.com/albums/dd308/izy-10/carsales3.jpg

[kikxz]

yeah hey deezsta it could be me? im from that area n im always on the road lol

http://img134.imageshack.us/img134/4237/dsc01339sn8.th.jpg (http://img134.imageshack.us/my.php?image=dsc01339sn8.jpg)http://img134.imageshack.us/img134/2338/dsc01340dy7.th.jpg (http://img134.imageshack.us/my.php?image=dsc01340dy7.jpg)http://img134.imageshack.us/img134/8553/dsc01341px0.th.jpg (http://img134.imageshack.us/my.php?image=dsc01341px0.jpg)http://img134.imageshack.us/img134/1204/dsc01336qr1.th.jpg (http://img134.imageshack.us/my.php?image=dsc01336qr1.jpg)


and btw who drives a white DA with black jdm rims in the deer park st albans area i wanna know what engine hes running he had that little bit more to catch up :D