***Official What did you do to your EK today***

[Hellomotog]

What's caclon mean??!!!

[unl3a5h]

What's caclon mean??!!!

+1 lol we aint all viet...

[Tosies]

Bu cac

[Hellomotog]

Whatt?!?

[EKVTIR-T]

cac nhỏ

[aowwllan]

New powersteering pump, wheel bearings, clutch bearing, brake pads, oils, fluids, spark plugs etc.. general prep for blue slip.
http://img21.imageshack.us/img21/8592/photo32rt.jpg (http://imageshack.us/photo/my-images/21/photo32rt.jpg/)
http://img600.imageshack.us/img600/9652/photo31g.jpg (http://imageshack.us/photo/my-images/600/photo31g.jpg/)

[Riced_Civic]

Bleed the brakes, finished off the lexan windows and took some angle out of the rear wing.

Still need to bed in the brakes and do alignment, then im ready for Nationals.

[mugen_ctr]

havent posted in ages!

i think this is rather self explanatory haha, never goin back to a inner city meetup :/

props to the photographer, really liked how it turned out :D

http://img818.imageshack.us/img818/1881/26545227559416254897617.jpg

[EKVTIR-T]

thats a great shot!

[CivicEGSI]

http://img818.imageshack.us/img818/1881/26545227559416254897617.jpg

Fuaarrrrrrrrrr, legit photo!

[drifter]

That photo is sweet as

[SHOGUNOVDDRK]

I got this stupid ass list today.


I'll go elsewhere for my roady because I know it'll be less hassle.



http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/402957_4511715912647_1612410192_n.jpg

[Riced_Civic]

most of thet is BS.

LOL at number 7

[Niko]

ordered something, 10-12 week wait, should be sweet when it arrives

[Hellomotog]

Buffing him!

http://img.tapatalk.com/31b043d5-be09-3f53.jpg

http://img.tapatalk.com/31b043d5-be1f-11e2.jpg

http://img.tapatalk.com/31b043d5-be30-cb21.jpg

http://img.tapatalk.com/31b043d5-be3f-18cc.jpg

Gonna do final polish
Then wash and dry
Then lime prime
Then wash and dry.
Then wax

10 hours and still going !

[CivicEGSI]

Holy shit, nice man^

Anyone heading to downshift today?

[dr1ftaX]

Buffing him!


Gonna do final polish
Then wash and dry
Then lime prime
Then wash and dry.
Then wax

10 hours and still going !

fuarrrk thats dedication right there

[Alvis]

ordered something, 10-12 week wait, should be sweet when it arrives

Sounds like JDM :) ... any clues???

[Niko]

Sounds like JDM :) ... any clues???

lol not clues, havn't seen it on an EK in syd/aus yet that l know of

[90LAN]

detailed engine bay

http://i144.photobucket.com/albums/r187/90LAN/2012-09-01163016.jpg

[FAITHLESS]

Damn that's hot

[THE 2BSEEN]

Buffing him!

http://img.tapatalk.com/31b043d5-be09-3f53.jpg

http://img.tapatalk.com/31b043d5-be1f-11e2.jpg

http://img.tapatalk.com/31b043d5-be30-cb21.jpg

http://img.tapatalk.com/31b043d5-be3f-18cc.jpg

Gonna do final polish
Then wash and dry
Then lime prime
Then wash and dry.
Then wax

10 hours and still going !

Hey brother what products are you using

[THE 2BSEEN]

My ek is about ready to pick up.
It was masked and rubbed back on Friday.
All trims will be painted, now I think I should buy her some new shoes and give her some low

[dorikin]

detailed engine bay

http://i144.photobucket.com/albums/r187/90LAN/2012-09-01163016.jpg

Love the OEM style

[Alvis]

^ love the OEM Honda sticker on the airbox :p

[ctx]

Tried replacing wiper blade inserts. The metal pieces keep falling out!! Help? :confused:

[Hellomotog]

hey man. my mate provided them all. shampoo was dodo. clay bar was dodo. then dodo wax at the end. the polishing compounds are menzerna. using festool polishing pads. using 2 bucket system obviously to wash aswell. any other questions just shoot me a pm and i will ask my mate.

[Hellomotog]

ye happenened to my front windscreen wiper. throw them out ASAP. mine came off and left a tiny scratch on the windscreen. just go buy those repco flat wipers they really good. more pricey but.

[KennyBKT]

quick wash and put on my rear lip + boot lid spoiler
http://i480.photobucket.com/albums/rr161/kenneth_tan13/IMG_2953.jpg

http://i480.photobucket.com/albums/rr161/kenneth_tan13/IMG_2946.jpg

[EK1.6LCIV]

managed to destroy a front abs sender, looked under the car to service the transmission and see a huge bundle of copper wire around the driveshaft abs ring area... hilarious
mustve had a rock or something under there

[xeno]

Take my Ek1 to the Brisbane city council rubbish tips, found out my car with 1/4 of fuel left, weight roughly under 1100kg without me in it. With all the add on mods the car carry, I am surprise still weight under 1100kg.

[Hellomotog]

What mods are on your car to weigh 1100? Gli or cxi?

[ekx105]

For that comfortable feeling - OEM Ek Armrest

http://i1139.photobucket.com/albums/n543/ohhneiloh/photo-97.jpg

[PHO]

I've always wondered, dafaq are those holes around the handbrake for? inb4 commo power window conversion.

[xeno]

What mods are on your car to weigh 1100? Gli or cxi?

Ek cxi

Jap spec B18c TypeR engine with 4.7FD LSD Gear box
Rx7 Fc front brake calipers conversion with 282mm brake rotors
Dc2R rear brake calipers conversion with 262mm brake rotors
Ek9 front strut brace
aircorn
recaro sr3 x2
Top fuel air intake,
Whiteline front and rear sway bars + rear subframe brace
15" aftermarket rims weight about 5.9kg each.

I think that all, rest of the mods, I don't think going to make any difference for the weight of the car.

Ps I haven't strip the car at all. The car still got the rear seat, all the carpets, Heavy rear parcel tray, spare tyre......etc.

[THE 2BSEEN]

took some pics of my ek at the painters

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/270659_3606008308739_986735349_n.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/284552_3606007428717_455542557_n.jpg

[AndreaCivic]

took some pics of my ek at the painters

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/270659_3606008308739_986735349_n.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/284552_3606007428717_455542557_n.jpg

Is it just me or are they really small pics?

Anyways I cleaned my baby today. RPF1s are a bitch to clean. But they come up good with a little shimmy shimmy yal
22858

[THE 2BSEEN]

Is it just me or are they really small pics?

Anyways I cleaned my baby today. RPF1s are a bitch to clean. But they come up good with a little shimmy shimmy yal
22858

They taken off my phone

[ek]

Put a CD player in and while I was doing that discovered that there was a aftermarket alarm.

I had no remotes or key to disable the siren so it started going off as soon as I unplugged it.
Had to scramble to unbolt the siren and dunk it in a bucket of water to shut it up haha

[AndreaCivic]

They taken off my phone
looks nice anyway man, some bigger pics would be great though.

[SHOGUNOVDDRK]

Registration was done on Friday

Weekend = drive, drive, drive

[Honda]

took some pics of my ek at the painters


Was it a full spray? How much was it?

[mocchi]

Was it a full spray? How much was it?

http://www.omgif.net/wp-content/uploads/2011/06/woah.gif

best username.

[THE 2BSEEN]

Was it a full spray? How much was it?

Yeah mate full respray.
Roof and bonnet reprimed, dents removed, trims removed and painted.
Inside doors and under bonnet painted also.
I was going to do a engine swap then respray it(clear coat turned to sh#t which happens with all super sonic blue paint)
How ever it got side swiped so did the painting bit first
So insurance for one side $300 and the rest for $2500.
My mate does alot of work for me and I send a few people to him
So he looks after me ;-)
Lol want some work done ehh

[Honda]

Yeah, I got a few dents here and there and scrapes (from previous owner). It's something I'll kinda consider, just wanted to know a rough cost of it :)

[Adamjoeldavis]

Today i am fitting my new front and rear strut braces (upper), hopfully fit my new short shifter with JDM Type R knob, fit the interior back in (after i make a couple of holes in it for the rear strut brace) and fix my LHF speaker.

[AndreaCivic]

Best username or sure! (I.e Honda) Buy it off ya? Lol

I'm going to install my new exhaust system tomorrow. The final piece arrived today. Spoon 4-2-1.
22889
This cost me $911 delivered from Japan. It is second hand but only used for a short time. Short enough for a small dent to be made though :/ but I saved about $400 off RRP so it's ok.
22890
22891

The rest of the system is made up of a brand new EK9 cat and a second hand fujitsubo RM01A catback. The RM01A was also only used for a short time. Cost me $960 delivered. The drawback was that the B-pipe section had to be cut in half to ship on Japans Postal service (EMS). Bummer.
22892
22893
22894

Going to HiTech Mufflers in the morning tomorrow. They will hopefully reweld the B-Pipe and fit the rest up. Will post back tomorrow hopefully with a photo and a video for sound :)

Car is an EK4 btw

[AndreaCivic]

One more for good measure :)

Hopefully it's genuine. I noticed no Jasma plate :S

22895

[AlexK]

sometimes they.dont have it my spoon n1 muffler does bot have it but i thought all there headers had it :/ wouldnt worry.too.much though :)

[90LAN]

good pick up on exhaust

[AndreaCivic]

Thanks Lan :)

The installation went well yesterday. Unfortunately I was busy rushing around all day and night so couldn't get a recording of the sound.

First impressions were good. There wasn't any noticeable difference in sound on start up. But slowly creep away from a stand still and a nice deep note comes out :D

It progressively gets louder through the rev range but just before VTec the sound almost completely goes? Strange. Then Vtec engages and it's ok (a little fart can kind of sound) but it didn't blow me away.

I wanted the RM01A because I heard it was loud but it actually wasn't. And I wasn't blown away.

But anyway I'm happy overall which is the main thing.

Then something bad happened in Balmain. On the way home last night I went over a speed bump and heard what sounded like the header bottoming out :(

Then almost every second speed bump it felt like it was bottoming out :(

Checked this morning and yep it's been scraping. :(

22923

Pic of the back. Not too exciting to look at :/

22924

Engine bay pic and sound sample to come :)

[EKVTIR-T]

Then something bad happened in Balmain. On the way home last night I went over a speed bump and heard what sounded like the header bottoming out :(

Then almost every second speed bump it felt like it was bottoming out :(

Checked this morning and yep it's been scraping. :(

Shit go man.

Its going to end up wearing right through if you dont raise the car or put some sort of bashplate

Its the nature of that design hanging so low

[90LAN]

doesnt matter as stance is more cool than damaged header's

RM01A was pretty ordinary to me

[THE 2BSEEN]

Lol if you want loud go with buddyclub spec 2 I love it.... Mrs doesn't so much lol

Pick up my ek tomorrow
Just need to find a spot to park it

Take some pics over the weekend

[AndreaCivic]

Shit go man.

Its going to end up wearing right through if you dont raise the car or put some sort of bashplate

Its the nature of that design hanging so low

Hmm yeah at the moment I'm just not driving it. Bash plate could be an option if I need to drive it as a daily again.

Heard the BC was really loud! Mine is loud enough for now but maybe one day, would love to race my car and a spec 2 would be awes for a race car.

[jdmek]

i got bc spec 3 and its loud ass!!

[AndreaCivic]

Haha shit thats mad! Get much attention from the po po?
I have never had any attention but Im thinking I may get some now.

PS LAN I haven't got any stance anyways so I'm resigned to being uncool.

Uncool FTW :)

[AndreaCivic]

Engine bay pic :)http://img.tapatalk.com/d/12/09/14/ruhezede.jpg
Don't know what that blue shit on the header gasket is, looks like glue..

[Tosies]

Looks good andreacivic!

[AndreaCivic]

Thanks Tosies :)

[Niko]

re did my tints, went lighter, looked worse in person before lol

http://imageshack.us/a/img826/7554/img0791d.jpg

http://imageshack.us/a/img198/4351/img0800y.jpg

[THE 2BSEEN]

Today i up loaded some pics
Sorry if there is too many pics

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/20120810_151050.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/20120810_151011.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/20120810_152059.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/20120915_120350.jpg

http://i1085.photobucket.com/albums/j424/THE_2BSEEN/20120915_120539.jpg

[Tosies]

Got bored so bought this, wonder if i could feel a difference once installed...
http://imageshack.us/a/img3/2589/20120916203207.jpg

[PHO]

How much did that set you back?

[Niko]

another brithday update, receiving/installing a stainless steel cat back twin loop exhaust either on thursday or friday

[eeko]

so.. you gonna get a kswap for your birthday next year or wha? LOL.

http://i.imgur.com/0ak9a.jpg

Got this.

[Niko]

so.. you gonna get a kswap for your birthday next year or wha? LOL.

hahahah...shh don't tell anyone lol

[eeko]

hahahah...shh don't tell anyone lol

:P hahaha

[Chriskoss]

so.. you gonna get a kswap for your birthday next year or wha? LOL.

http://i.imgur.com/0ak9a.jpg

Got this.

cool.. a worthless peice of metal that doesnt do anything :D

[Etziel]

a bit late but eh,
yesterday i got my civic back from bodyworks (i had a big hit and tear) so i pulled out the carpet and cleaned all the plastics :) and today i put em back in :D

[AndreaCivic]

http://www.youtube.com/watch?v=5MfR2Sk_-D8&feature=youtube_gdata_player

YouTube of the exhaust installed last Wednesday :)

[Hellomotog]

22985

5 stud
Asr brace
Blox billet lca
3 point strut brace
Zeal function coilovers

More pics in my build thread!

[Niko]

installing it tomorrow

http://imageshack.us/a/img401/2893/img0805i.jpg

[AndreaCivic]

Shit go man.

Its going to end up wearing right through if you dont raise the car or put some sort of bashplate

Its the nature of that design hanging so low

Took your advice and raised car about 12mm at the front. This is as high as my skunk2 pro s 2 coils would go. The rears were also at their limit. I thought it was a good compromise.

DIY dude

http://img.tapatalk.com/d/12/09/23/abu9aham.jpg

Now she sits like this

http://img.tapatalk.com/d/12/09/23/y8u4y9e8.jpg

[eeko]

Chilled with tosies at Spring Picnic..

http://i.imgur.com/XNuux.jpg

[AndreaCivic]

By the way, I'm liking what I see with you guys cars. Niko, THE 2BSEEN and Hellomotog. Good stuff :)

[na-118]

very nice!



22985

5 stud
Asr brace
Blox billet lca
3 point strut brace
Zeal function coilovers

More pics in my build thread!

[dr1ftaX]

Chilled with tosies at Spring Picnic..

http://i.imgur.com/XNuux.jpg

Chilled or burned.. ? LOL

[Niko]

fitted

http://imageshack.us/a/img829/6162/img0807wo.jpg

[THE 2BSEEN]

fitted

http://imageshack.us/a/img829/6162/img0807wo.jpg

Wet~ness looks nice bro
Where from?
what type?
Can I ask how much?

[Niko]

Wet~ness looks nice bro
Where from?
what type?
Can I ask how much?

thanks, its an xforce cat back system, don't know the price as l got it as a bday present but on ebay their roughly around the $700-$800 range

[EKVTIR-T]

upload soundclip please

[Niko]

upload soundclip please

don't have one just yet, at idle it sounds completely like a stock exhaust, then it opens, sounded better though when there was no muffler on, might put a straight pipe on later on

[THE 2BSEEN]

don't have one just yet, at idle it sounds completely like a stock exhaust, then it opens, sounded better though when there was no muffler on, might put a straight pipe on later on

If you want loud bro go with a buddy club spec 2
I love it

[Niko]

If you want loud bro go with a buddy club spec 2
I love it

thats whats lm doing.... lol

[90LAN]

for that price why not buy the real thing, mugen ......

[Niko]

for that price why not buy the real thing, mugen ......


thanks, its an xforce cat back system, don't know the price as l got it as a bday present but on ebay their roughly around the $700-$800 range

.......

[dorikin]

some ppl like spugen lol


btw whats that bracket under your rear bar

[Niko]

some ppl like spugen lol


btw whats that bracket under your rear bar

had it there when l was running a rear tow hook as it was poking up and hitting the bar

[mocchi]

lmao spugen
i thought it was megan

[Niko]

shaving cream expolded on my car today

http://imageshack.us/a/img528/2108/img0821n.jpg

[mugen_ctr]

shaving cream expolded on my car today

http://imageshack.us/a/img528/2108/img0821n.jpg

http://25.media.tumblr.com/tumblr_m96t23uE3K1rt3gy1o1_1280.png

[aowwllan]

gave the nugget a wash also.

http://imageshack.us/a/img69/9523/photo38m.jpg (http://imageshack.us/photo/my-images/69/photo38m.jpg/)

[Tosies]

http://imageshack.us/a/img132/8753/20120929024243.jpg

[AndreaCivic]

Nice! How much that set you back? Let us know if it feels any different?

[dr1ftaX]

Nice phil! Always wanted a X bar, but dno if EK one fits EM or if there's even one for an EM?

[Tosies]

Nice! How much that set you back? Let us know if it feels any different?
Yet to test it out haha, i was told by the guy i bought it off that u could actually feel a difference!
PM'd u about price


Nice phil! Always wanted a X bar, but dno if EK one fits EM or if there's even one for an EM?
Thanks Josh, not too sure hey..
was a bloody bitch to fit, so fiddley

[mattsrea]

retrofitted headlights, cleaned the outta seal out and placed onto car :)

http://img689.imageshack.us/img689/4472/20120929165432.th.jpg (http://img689.imageshack.us/i/20120929165432.jpg/)
http://img716.imageshack.us/img716/5829/20120930164140.th.jpg (http://img716.imageshack.us/i/20120930164140.jpg/)

[mugen_ctr]

Very excited now, Booked my Dyno tune at Revzone at end of November, turbo kit is all done minus the dump which is gonna b custom made prior to the dyno tune day :D

Im hoping the power figures be a conservative 120 - 130kw, an maybe 140 if the tuner says its safe to do so

[mugen_ctr]

retrofitted headlights, cleaned the outta seal out and placed onto car :)

http://img689.imageshack.us/img689/4472/20120929165432.th.jpg (http://img689.imageshack.us/i/20120929165432.jpg/)
http://img716.imageshack.us/img716/5829/20120930164140.th.jpg (http://img716.imageshack.us/i/20120930164140.jpg/)

good job bro... finally sum1 pulled it off hahaha, was it hard at all? and hows the projection lighting at nite?

[mattsrea]

Very excited now, Booked my Dyno tune at Revzone at end of November, turbo kit is all done minus the dump which is gonna b custom made prior to the dyno tune day :D

Im hoping the power figures be a conservative 120 - 130kw, an maybe 140 if the tuner says its safe to do so

Ahh good job man, you gotta take me for a spin once its all done! I wanna feel what a boosted D16Y8 will be like, may consider it for my ej when i get fulls.


good job bro... finally sum1 pulled it off hahaha, was it hard at all? and hows the projection lighting at nite?
And thanks man it wasnt too hard, just pretty hard taking of the lense and stuff other then that assembling it is all good. The gay thing is that there is only one H1 Bi-xenon HID avaliable and thats from where i purchased my projectors (The Retrofit Source) and bloody expensive!.
Also the projection is perfect, no scatter or blinding oncoming traffic and sharp cut off :)

[EK1.6LCIV]

drove it all the way back from Rockhampton to Brisbane for the long weekend on a tank of fuel, good consumption I wasn't expecting with the B18CR whilst sitting on 3500rpm at 100kph

http://i224.photobucket.com/albums/dd127/kwelrap/photo-Copy-1.jpg

[ekx105]

^^ thats real nice!!

[Chriskoss]

Chilled with tosies at Spring Picnic..

http://i.imgur.com/XNuux.jpg

Couple'a noiiceee Eks

[Niko]

only did one wheel, gave up on the rest lol
http://imageshack.us/a/img836/7839/img0829w.jpg

[THE 2BSEEN]

only did one wheel, gave up on the rest lol
http://imageshack.us/a/img836/7839/img0829w.jpg

Nice mate what ya use and how long it take lol

[THE 2BSEEN]

Very excited now, Booked my Dyno tune at Revzone at end of November, turbo kit is all done minus the dump which is gonna b custom made prior to the dyno tune day :D

Im hoping the power figures be a conservative 120 - 130kw, an maybe 140 if the tuner says its safe to do so

What's your build thread under wouldn't mind susing out your turbo kit lol

[Niko]

Nice mate what ya use and how long it take lol

used tyre pen, you can buy it at autobarn, took (just for that part) about 20min lol, you might have to take the wheels off to do it as the paint doesn't come out when the wheel is on. don't know if l would white "bridgestone" or not

[viinnh]

all this time i thought people use liquid paper ****.

[mugen_ctr]

What's your build thread under wouldn't mind susing out your turbo kit lol

ahhh never bothered putting one up haha... but its just a kit i pieced together with a few custom one off parts, ebay was out of the question, an greddy/apexi/edlebrock kit was hard to come by, so custom kit is the only option :)


all this time i thought people use liquid paper ****.

me too LOL...

But how long does it last??? cant imagine the white paint lasting very long :/

[Niko]

all this time i thought people use liquid paper ****.

lol good one

me too LOL...

But how long does it last??? cant imagine the white paint lasting very long :/

not too sure, about to find out though lol

[Alexx]

too much going on there, clashes with the red signage on the wheels!

[Niko]

too much going on there, clashes with the red signage on the wheels!

lol l was tossing up to do it or not because of that reason, only did it as my new rims are arriving next month, wanted to try it out on these to see what it looks like before l do it to the new rims

[Alvis]

lol l was tossing up to do it or not because of that reason, only did it as my new rims are arriving next month, wanted to try it out on these to see what it looks like before l do it to the new rims

Noice, looking forward to seeing the new rims - wasn't a massive fan of existing rims - i.e. for the condition of your car I think it deserves something better!

Anyway, cleaned, vacuumed seats, interior and shined the plastics this afternoon

[Niko]

Noice, looking forward to seeing the new rims - wasn't a massive fan of existing rims - i.e. for the condition of your car I think it deserves something better!

ye, l think the problem was that it didnt fill the guards up (should get some spacers just to see what they look like) should look good when the new ones arrive

[eeko]

ye, l think the problem was that it didnt fill the guards up (should get some spacers just to see what they look like) should look good when the new ones arrive

and needs another inch drop to tuck those thick as tires. :P

[Niko]

and needs another inch drop to tuck those thick as tires. :P

l wish l could lol, the resonator just sits too low

[eeko]

l wish l could lol, the resonator just sits too low

pffft.. be a man and do it.. resonators are replaceable.

[tsol0811]

l wish l could lol, the resonator just sits too low


pffft.. be a man and do it.. resonators are replaceable.

What resonator?



Got bored so slammed it on its ass even more

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/148814_10151453545113136_1916484811_n.jpg

[Tosies]

Nice tony!

sold the rpf1's and rocking the new buddyclub sf's polished
http://farm9.staticflickr.com/8320/8049346321_711905c4d1_b.jpg

what you guys think? leave the height or lower a tad?

[nobbs]

Nice tony!

sold the rpf1's and rocking the new buddyclub sf's polished

what you guys think? leave the height or lower a tad?

Lower it a tad :)

[Niko]

[QUOTE=tsol0811;3564337]What resonator?QUOTE]

l got a new exhaust system, atm its sitting abit low due to being 2.4" in diameter and due to my short shifter kit being in the way

http://imageshack.us/a/img121/9137/img0814bd.jpg

if l go lower (which l will) l'll have to adjust it so it doesn't drag

[Alexx]

just drag it, its no big deal :)

Tony knows whats up :thumbsup::thumbsup:

[ekx105]

Took it to Top One Auto for a pinkslip insoection

http://i1139.photobucket.com/albums/n543/ohhneiloh/photo-100.jpg

[viinnh]

looks road worthy lol

[Glocker]

Took it to Top One Auto for a pinkslip insoection

http://i1139.photobucket.com/albums/n543/ohhneiloh/photo-100.jpg

dat wing is a defect

[viinnh]

not if you got another third brake light

[Glocker]

it's gonna fly off and kill people

[eeko]

What resonator?



Got bored so slammed it on its ass even more

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/148814_10151453545113136_1916484811_n.jpg

Looks sweet.


Nice tony!

sold the rpf1's and rocking the new buddyclub sf's polished
http://farm9.staticflickr.com/8320/8049346321_711905c4d1_b.jpg

what you guys think? leave the height or lower a tad?

This guy so much bling... 1" drop kgo.


just drag it, its no big deal :)

Tony knows whats up :thumbsup::thumbsup:

Drag drag indeed.....


What i did today...

http://i.imgur.com/onmQql.jpg

Test pipe. (p.s that isnt me lol)

[Glocker]

Nice tony!

sold the rpf1's and rocking the new buddyclub sf's polished
http://farm9.staticflickr.com/8320/8049346321_711905c4d1_b.jpg

what you guys think? leave the height or lower a tad?

raise it

[dr1ftaX]

Looks sweet.



This guy so much bling... 1" drop kgo.



Drag drag indeed.....


What i did today...


Test pipe. (p.s that isnt me lol)

WTF holdout information, you never mentioned anything about a test pipe!?

[eeko]

WTF holdout information, you never mentioned anything about a test pipe!?

Lol was gonna get stock cat punched out.. but test pipe was on hand so it was done :)


raise it

.......

btw theres a twin of your car in blacktown... exact same color... as low as yours.. front and rear lip.. black rims...

only difference is it has good paint. LOL

[Glocker]

Lol was gonna get stock cat punched out.. but test pipe was on hand so it was done :)



.......

best mod ever

[Tosies]

Come down, I wanna hear it cuz.

[Hellomotog]

http://img.tapatalk.com/d/12/10/05/e7enuvy4.jpg
Straight from japan

[hoojee]

^ that's mint!

[tsol0811]

just drag it, its no big deal :)

Tony knows whats up :thumbsup::thumbsup:

Yup thats why i said what resonator? :)

anyways not long after i slammed it even more recently i have bad news! :(
4th running defect

http://i850.photobucket.com/albums/ab68/tsol0811/defect.jpg

[Tekkenforce]

Damn bl man. But cars looking hot

[eeko]

Yup thats why i said what resonator? :)

anyways not long after i slammed it even more recently i have bad news! :(
4th running defect

http://i850.photobucket.com/albums/ab68/tsol0811/defect.jpg

damn the st mary's police.

[dr1ftaX]

farrk always just before meets/shows! dirty dogs.

[Tosies]

Tony will come back even lower.

[Niko]

http://imageshack.us/a/img834/3503/dscf1467ch.jpg

finished the writting as it looked abit odd having it only on one tyre

[THE 2BSEEN]

http://imageshack.us/a/img834/3503/dscf1467ch.jpg

finished the writting as it looked abit odd having it only on one tyre

Nice work bro.

How long you got it down too.

[Niko]

Nice work bro.

How long you got it down too.

well, after the second wheel, took about 1min for each letter

[CivicRacer13]

stripped my front calipers cleaned them up and painted them black ready to go on with new slotted discs and new Koni shocks and tein s tech spring being installed tomoro arvo should lower it pretty good :3
and put ozhonda stickers on xD
http://i786.photobucket.com/albums/yy149/Ramb0_album/264379_3148599973530_849006127_n.jpg
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3812.jpg
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3815-1.jpg

[subie]

from this:

http://smg.photobucket.com/albums/v518/nilprapai/My%20EK/IMG_0390.jpg

to this:

http://smg.photobucket.com/albums/v518/nilprapai/My%20EK/IMG_1313.jpg

[mattsrea]

from this:

http://smg.photobucket.com/albums/v518/nilprapai/My%20EK/IMG_0390.jpg

to this:

http://smg.photobucket.com/albums/v518/nilprapai/My%20EK/IMG_1313.jpg

Nice man, btw did your clock came factory amber or did you change?

[subie]

Nice man, btw did your clock came factory amber or did you change?

stock standard

[CivicRacer13]

front rotors,calipers,Koni shocks and Tein s tech springs in :3
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3830-2.jpg

[KennyBKT]

front rotors,calipers,Koni shocks and Tein s tech springs in :3
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3830-2.jpg

same spring/shock setup as me haha. Should sit nice mate good work (Y)

[CivicRacer13]

same spring/shock setup as me haha. Should sit nice mate good work (Y)

Oh really ? yeah im hoping it will :) hows the handling now with that spring and shock setup ?? im unable to test drive it at the moment get my license back in 17 days lol

[TbM]

Nice man, btw did your clock came factory amber or did you change?
What colour is your clock?

[KennyBKT]

Oh really ? yeah im hoping it will :) hows the handling now with that spring and shock setup ?? im unable to test drive it at the moment get my license back in 17 days lol

Yeah. Exact same Koni SRT.T shock + Tein S Tech setup. Handling over stock is great and ride isnt unbearable so it should be good man.

Not really what i did today, but plastidipped the pods in the front bar where the foglights go (dont know what their called?) matte black to break up the blue abit.

http://i480.photobucket.com/albums/rr161/kenneth_tan13/DSC_0801_zpsd47efbed.jpg
http://i480.photobucket.com/albums/rr161/kenneth_tan13/DSC_0802_zpsef27cab7.jpg
http://i480.photobucket.com/albums/rr161/kenneth_tan13/DSC_0810_zps016cc3f6.jpg

[EKVTIR-T]

nice quality budget setup srt with s-tech :thumbsup:

none of this taiwanese bitnis

[THE 2BSEEN]

Yeah. Exact same Koni SRT.T shock + Tein S Tech setup. Handling over stock is great and ride isnt unbearable so it should be good man.

^^^ nice to hear I've got to lower my civic, I was thinking good shocks and run some coilover sleeves...plus I need to get some good rear shocks for my crx

[Hellomotog]

Hey mate selling adjustable suspension with coil over sleeves if your interested
Sits really low
http://img.tapatalk.com/d/12/10/09/te2uga3u.jpg

[R34P3R]

My 2 girls <3
http://imageshack.us/scaled/landing/213/20121003184920.jpg
Loved my R34 seats so i bought another pair for my ek lol
http://imageshack.us/scaled/landing/607/20121007142113.jpg
Also sprayed my interior and rear badge
http://imageshack.us/scaled/landing/856/20120831173703.jpg
http://imageshack.us/scaled/landing/43/20120831161820.jpg
http://imageshack.us/scaled/landing/521/20120923200715.jpg

[THE 2BSEEN]

Hey mate selling adjustable suspension with coil over sleeves if your interested
Sits really low
http://img.tapatalk.com/d/12/10/09/te2uga3u.jpg

yeah bro send me some pics and a price

[UkuleleGod]

http://i38.photobucket.com/albums/e118/gothecow212/Civic1_zps69307fdf.jpg

Type R Grill!

[AndreaCivic]

Nice tony!

sold the rpf1's and rocking the new buddyclub sf's polished
http://farm9.staticflickr.com/8320/8049346321_711905c4d1_b.jpg

what you guys think? leave the height or lower a tad?

I like it as is. maybe lower a bit but i would be happy with that stance.
what size are the wheels btw?

[CivicRacer13]

Headlights installed :D
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3872_zps5d238846.jpg

sits alright now still will sag a little more but it makes it up my drive way by about a finger space between the front lip and driveway haha :)
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3877_zps65cec158.jpg

http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3881_zps7a03e070.jpg

[FRK202]

Headlights installed :D
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3872_zps5d238846.jpg

sits alright now still will sag a little more but it makes it up my drive way by about a finger space between the front lip and driveway haha :)
http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3877_zps65cec158.jpg

http://i786.photobucket.com/albums/yy149/Ramb0_album/IMG_3881_zps7a03e070.jpg

What front lip (and where did you get it) do you have on your civic?

[CivicRacer13]

What front lip (and where did you get it) do you have on your civic?

its just a JDM T-R STYLE lip and i got it from ebay about 12months ago :)

[Red_EG4]

http://i38.photobucket.com/albums/e118/gothecow212/Civic1_zps69307fdf.jpg

Type R Grill!

I feel dirty saying this because it's pre-facelift, but I love this car.

[UkuleleGod]

I feel dirty saying this because it's pre-facelift, but I love this car.

Thanks man! It is kinda a work in process, but I like it :)

[eeko]

http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash3/665044_10151474156437222_725881456_o.jpg

cause racecar.

[AndreaCivic]

Stuff going in the car tomorrow

http://img.tapatalk.com/d/12/10/18/yny9ute5.jpg

[Niko]

Got my new rims, stoked

[EKVTIR-T]

Got my new rims, stoked
Lets see

[Niko]

http://imageshack.us/a/img832/7076/photoyfu.jpg

[Frosty-Civic]

More please

[eeko]

http://sphotos-a.ak.fbcdn.net/hphotos-ak-snc6/172698_10151483320282222_294271969_o.jpg

[dorikin]

eeeveryday i'm wrinklin'

http://imageshack.us/a/img259/2903/img5173g.jpg

[90LAN]

doing the timing belt

http://i144.photobucket.com/albums/r187/90LAN/DSC02774_zps04611c35.jpg

[Alvis]

Gave her a wash, claybar and wax

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/P1040805.jpg

[dorikin]

alt, ps, i/m on

http://imageshack.us/a/img703/4576/img5194p.jpg

[xeno]

Just won this auction, can't wait to arrive.

http://page11.auctions.yahoo.co.jp/jp/auction/n111523877

[grifty]

Just won this auction, can't wait to arrive.

http://page11.auctions.yahoo.co.jp/jp/auction/n111523877

You do realise you need the heater box & all other associated motors to make it work right?

[dorikin]

haha owned

[PHO]

You do realise you need the heater box & all other associated motors to make it work right?

This. single din is analogue climate control. double din is digital. Have to change everything from looms to ducts (vents are in different location, so the ducts wont line up to the vents) and heater core ect.

Unless you race car, and dont need radio ect and have heater core and ac removed.

[dorikin]

you mean the vents on the heater box?

[PHO]

oh yeah, just remembered white vents are apart of the core/box.

[grifty]

you mean the vents on the heater box?

the unit adjusts everything electronically, inside/outside air and the heater tap by motors, stock EK uses cables.

you will need all the wiring aswell.....

better off changing the loom

[dorikin]

i knows, just wondering what he meant by "vents are in different location"

[TbM]

i knows, just wondering what he meant by "vents are in different location"
iirc the ducting inside the dash will not meat up with the vents, if you look at a pic of a manual one you can see they are in different locations

[PHO]

i knows, just wondering what he meant by "vents are in different location"

On double din, the holes in the console where the air comes out is to the left more.
And I meant to say you had to change the white ducts/vents that direct the air from heater box to the vents. Then I realised that those white ducts are already apart of the heater box. So changing to the digital heater box will also change the ducts.

Heater box with white ducts:
http://imageshack.us/a/img689/4286/a6583n7f20.jpg

Single din vs double, look at placement of vents.

http://www.hkc-speed.com/images/uploads/ek9-climate_control/0203/1.jpghttp://cdn.sulitstatic.com/images/2011/0426/034050231_ek-climate-control.jpg

[EKVTIR-T]

Nice pho,very informative and on point post

[TbM]

You must spread some Reputation around before giving it to PHO again.

[PHO]

Nice pho,very informative and on point post

A++++++ good comms quick sale but doesnt lift

You must spread some Reputation around before giving it to PHO again.

nat goot enuf

[dorikin]

I see

Naice work

[xeno]

You do realise you need the heater box & all other associated motors to make it work right?

I do realise, I got friends going to Malaysian and Philippines. I am looking some of the auction in there for all other parts. They have a lot of Ek Vis there and the is parts is dirt cheap. Hopefully I can get everything there. I don't need to put it in my car straight away. I am slowly getting it in done.

[KennyBKT]

http://i480.photobucket.com/albums/rr161/kenneth_tan13/IMG_3173_zps0bb3d9b1.jpg
Fit my new Spoon lip

[EK1.6LCIV]

nice EK sedan :)

[eeko]

http://i.imgur.com/8bftal.jpg

http://i.imgur.com/RY54fl.jpg

http://i.imgur.com/UM4WEl.jpg

http://i.imgur.com/Li49gl.jpg

:)

[R34P3R]

Bumper stitched up, it was damaged from previous owner hitting everything >.> also bought new headlights along with a center console and stickered it right away =D

http://img141.imageshack.us/img141/9974/20121026112749.jpg
http://img217.imageshack.us/img217/291/20121026135717.jpg
http://img651.imageshack.us/img651/3900/20121026145415.jpg
http://img194.imageshack.us/img194/1013/20121023220214.jpg

[eeko]

http://i.imgur.com/UdERRl.jpg

[waix]

http://vimeo.com/52289340
Took the daily out :) Watch in HD

[em1bill]

http://i47.tinypic.com/34hhxjs.jpg

[eren]

http://vimeo.com/52289340
Took the daily out :) Watch in HD

Nice!!

[eren]

http://2.bp.blogspot.com/-70YdI0YHK04/UI54STecHDI/AAAAAAAAASI/Wp0NUmcG74g/s1600/664738_10200118423827755_1699173590_o.jpg

Mugen wing installed.

[EK1.6LCIV]

Can teach you to plastic weld, mine gets bumped into yearly from people who neglect to remove their tow bars and leave notes, easy skill to learn

[EK1.6LCIV]

Ran high 13s

[dr1ftaX]

Sick video! Car is cleannn, good fitment of the SiR lip on a facelift!

[ekx105]

Bought ASR Subframe Brace from JDMyard today. Can finally install my OEM Ek9 Rear Sway bar.

http://i1139.photobucket.com/albums/n543/ohhneiloh/photo-105.jpg

[eren]

Bought ASR Subframe Brace from JDMyard today. Can finally install my OEM Ek9 Rear Sway bar.

http://i1139.photobucket.com/albums/n543/ohhneiloh/photo-105.jpg
how much did it cost you altogether with beaks?

[ekx105]

how much did it cost you altogether with beaks?

Bought them seperately at different times so i forgot how much i paid for them. Sorry

[eren]

Bought them seperately at different times so i forgot how much i paid for them. Sorry
ok , show us some pic's when installed ?

[eeko]

will the beaks work with an asr? oh and what brackets you gonna use to mount the rsb neil? D:

http://www.youtube.com/watch?v=ERBQ9bhIt9w

[ekx105]

Im pretty sure you can put a beaks bar with the asr brace. Ive seen it on some ek's.
I got oem d brackets and hard race endlinks when i bought the ek9 rsb from yonas.

[mattsrea]

Gave it a wash since it was a nice hot day.

http://img402.imageshack.us/img402/6412/20121030115445.jpg

[grifty]

Do u even need a beaks bar on a asr lol?

[PHO]

Do u even need a beaks bar on a asr lol?

It is a requirement for StansWok

[TbM]

Do u even need a beaks bar on a asr lol?
bracing a brace? i think not

[CivicEGSI]

It is a requirement for StansWok

You must spread some Reputation around before giving it to PHO again.

[ekx105]

Dont need it. But whatever. My car so i can do what i want.

[Spoon-Accord]

Gave it a wash since it was a nice hot day.

http://img402.imageshack.us/img402/6412/20121030115445.jpg


retrofit!!!!!!!!!!!

[SuperJDM.]

Gave it a wash since it was a nice hot day.

http://img402.imageshack.us/img402/6412/20121030115445.jpg

lol datderefatlipy0

[ctx]

Gave it a wash since it was a nice hot day.

http://img402.imageshack.us/img402/6412/20121030115445.jpg

When did you do the retrofit? Was it hard?

[mattsrea]

lol datderefatlipy0

haha i like the mugen lip =D i dunno type R lips are so common now a days, most facelift ek's now a days ALL look the same lol


When did you do the retrofit? Was it hard?

I got the mini H1 projectors of TRS (The Retrofit Source) for about $150 shipped. And difficulty wise, wasn't that hard, if you know how to DIY Black housings then you'll know how to do this. Its just a matter of pulling it apart, unscrewing the old lense out and fitting the projector and putting all seals in properly. Took me about 2-3 hours to do. Results paid off tho =D
Went to Brighton beach and done a quick photoshoot, couple days ago, retros looks good =)
http://img832.imageshack.us/img832/9775/20121104194543.jpg
http://img22.imageshack.us/img22/2684/20121104194858.jpg

[PHO]

Didn't do it to my ek, but dropped mates ek 1" all round on pedders shocks, custom springs and extended top hats. My ek in background >:D

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/56040_343331995763278_799487135_o.jpg

[mattsrea]

Didn't do it to my ek, but dropped mates ek 1" all round on pedders shocks, custom springs and extended top hats. My ek in background >:D

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/56040_343331995763278_799487135_o.jpg

How much was the drop?

[PHO]

1 inch all round. Subtle. Haha

[mattsrea]

oh right fair enough his not looking for a stance isnt he?

[PHO]

He's anti stance. Hahahahaha. All about practicality.

[mattsrea]

He's anti stance. Hahahahaha. All about practicality.

ahahaha well its better than to tell people that your rollong on stockies lol. But yeah having too much stance makes your car undriveable and a bright light for cops ;)

[mugen_ctr]

He's anti stance. Hahahahaha. All about practicality.

stance = new rice, all show an no go ahahaha

car looks good with 1 inch drop but.

[mattsrea]

stance = new rice, all show an no go ahahaha

hahahah so true

[namtaro]

lol...

[dorikin]

sexspec airbox

http://img23.imageshack.us/img23/5443/img5734a.jpg

[FRK202]

http://vimeo.com/52289340
Took the daily out :) Watch in HD

Is that a eBay lip you installed there? Sweet ride nonetheless, love the video edit!

[PHO]

Ebay > OEM

[Donfeao]

Lowereddddd it on Buddy Club N+
23317
23318
23319

[90LAN]

Ebay > OEM

you are wrong

home made > ebay > oem

[sangyz]

^^^^^^

[mattsrea]

Redone my guards and removed the shitload of orange peel on my guards and gave it a nice cut and polish using Meguiars Ultimate Compound and Ultimate Polish. Turned out amazing!

Before (Notice how dull the guards are)
http://img252.imageshack.us/img252/7649/dscn0796v.jpg


After
http://img560.imageshack.us/img560/9128/20121111160121.jpg

[Alvis]

A quick phone pic after putting Swissvax on the car for the first time:

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/83C72664-86C2-4F01-8B88-7F3BC7D3F570-5354-000002ED3D7FA05D.jpg

Close up with reflection 20 metres across the street:

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/D62665BE-EB6F-472F-BFC0-B1939ED68A44-5354-000002EFE482A05D.jpg

[PHO]

you are wrong

home made > ebay > oem

I stand corrected.

[Alvis]

Nice work mattsrea :thumbsup:

[mattsrea]

Nice work mattsrea :thumbsup:

Thanks man, i painted the guards myself too, its not completely perfect but it looks helluh good, i'm gonna redo the front bumper tomorrow, i hope the steps for metal material is same for ABS plastic.

[mugen_ctr]

Thanks man, i painted the guards myself too, its not completely perfect but it looks helluh good, i'm gonna redo the front bumper tomorrow, i hope the steps for metal material is same for ABS plastic.

spray gun or can?

i needa respray my door molds as they are flaking :/

[mattsrea]

spray gun or can?

i needa respray my door molds as they are flaking :/

spray gun, didnt practice much, just done some basic adjustment then done a lil practice with water then mixed it all in. Pretty decent for a first timer. And my side skirts are flaking, well the top top is =\

[mugen_ctr]

spray gun, didnt practice much, just done some basic adjustment then done a lil practice with water then mixed it all in. Pretty decent for a first timer. And my side skirts are flaking, well the top top is =\

ahh lucky man, ive always spray can my stuff lol autobarn ftw haha

wen summer gets closer gonna do a respray of all the plastic bits that are worn out, hopefully comes out as good as urs haha

[mattsrea]

ahh lucky man, ive always spray can my stuff lol autobarn ftw haha

wen summer gets closer gonna do a respray of all the plastic bits that are worn out, hopefully comes out as good as urs haha

Ahh well actually i used spray gun for my colour code and canned my clear (which was a bad idea hence gave shitloads of orange peel but mehh i was really tight on cash back then lol) but if you sand it back and use like appropriate cutting compound and polish, it will give out the same result :)
But yeah just as long as you make sure its smooth as hell before you cut and polish (if you plan on to) if you want that glossy shine :)

[Niko]

A quick phone pic after putting Swissvax on the car for the first time:

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/83C72664-86C2-4F01-8B88-7F3BC7D3F570-5354-000002ED3D7FA05D.jpg

Close up with reflection 20 metres across the street:

http://i1132.photobucket.com/albums/m579/apalmucci/My%20Civic/D62665BE-EB6F-472F-BFC0-B1939ED68A44-5354-000002EFE482A05D.jpg

great stuff ay, you might pay abit for it, but you can tell the difference

http://img100.imageshack.us/img100/9630/17697610151076249077723.jpg

http://img87.imageshack.us/img87/1307/56155644449370560667849.jpg

[Alvis]

Very nice, are they the new wheels mate? Wow...

[AndreaCivic]

digging the new boots.. really good fitment :thumbsup:

[Niko]

Very nice, are they the new wheels mate? Wow...

yeah they are, good old work meisters lol


digging the new boots.. really good fitment :thumbsup:

Thanks for that

[mrtony]

gave her a wash
http://i1062.photobucket.com/albums/t488/mrtony_/IMG_0138_1024x768.jpg

[Ryan_1]

gave myne wash this afternoon tomorrow it is getting 5% tint

[mattsrea]

gave her a wash

Far im digging your diy matt white! Its getting me thinking of redoing mine white sometime next year.

Well i had to reclear my bumper as the clear was flaking off. Not the best but meh its a daily. Will cut and polish tomorrow. Also had to jack the car up abit because i didnt wanna be bending my back too much and i couldnt be bothered taking off the front bar.