***Official What did you do to your Integra today***

[FlavzzTEGRA]

^^ Nice job on the Headlights mate. Serviced the Teg today after picking up a cheap trolley jack at supercheap. New spark plugs, oil and oil filter. Feels like a new car!

[ivseenwars]

Needed front tyres for roadworthy, so said **** it and bought a whole set.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/944484_467014320048687_1059977665_n.jpg
Hover mode. Got potenza re002's, 195/55/15. Really wanted 205/50 but they were out of my budget \:

[Johnie]

^^ Nice job on the Headlights mate. Serviced the Teg today after picking up a cheap trolley jack at supercheap. New spark plugs, oil and oil filter. Feels like a new car!
Ill be doing that tomorrow need to do the teg and skyline arg

[chubby steve]

was bored so i did a quick video


http://s814.photobucket.com/user/roach1187/media/VIDEO0012_zpsc0d85549.mp4.html

[ivseenwars]

Got a Type R lip. Needs to be painted
http://img.tapatalk.com/d/13/05/23/py6etu6e.jpg

[charliebrown]

Got a Type R lip. Needs to be painted
[IMG]http://img.tapatalk.com/d/13/05/23/py6etu6e.jpg[/IMG

lolol

http://img546.imageshack.us/img546/295/20130417080021.jpg

new trend

[ivseenwars]

lolol

http://img546.imageshack.us/img546/295/20130417080021.jpg

new trend

who even needs color matching

[ivseenwars]

Painted valve cover + carbon wrapped the plug cover for funsies
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/268887_469775666439219_1324236342_n.jpg

[mattsrea]

Looking good alex!!
And you too cb, trd lip is it
btw still picking up number plate Alex? Your inbox is full lol

[ivseenwars]

Looking good alex!!
And you too cb, trd lip is it
btw still picking up number plate Alex? Your inbox is full lol

**** full already lol? cleared.

[onetwo]

was bored so i did a quick video


http://s814.photobucket.com/user/roach1187/media/VIDEO0012_zpsc0d85549.mp4.html

not even up to optimal temp! ruthless! hahaha

[chubby steve]

had it idling for bout 15mins the temp dnt go much higher than that with a large radiator fan switch and low temp thermostat :thumbsup::)

[Johnie]

Another jdm front conversion completed just now :)

Before
http://www.ozhonda.com/forum/attachment.php?attachmentid=24894&d=1369658573

Jdm rad support cut and weilded

http://www.ozhonda.com/forum/attachment.php?attachmentid=24898&d=1369658993

http://www.ozhonda.com/forum/attachment.php?attachmentid=24895&d=1369658582

Final product
Just bonnet left + parkers and indicators to wire up
http://www.ozhonda.com/forum/attachment.php?attachmentid=24896&d=1369658590

Time taken 2-3 Hours

If anyone needs help doing this conversion feel free to give me a inbox

[mattsrea]

Fah dude how many dc2s do you have? And how many jdm fronts do you have and done? LOL you should write a DIY up for those who dont know instead :) nontherless its still looking nice simply because its jdm front and multicolored as always hahaha. Keep it up!

[Johnie]

Fah dude how many dc2s do you have? And how many jdm fronts do you have and done? LOL you should write a DIY up for those who dont know instead :) nontherless its still looking nice simply because its jdm front and multicolored as always hahaha. Keep it up!
Haha, thanks, i have done 3 jdm front conversions, currently i own 2 dc2s, because iv'e done it a few times now its getting fairly easy, 1st time i did it took around 5 hours, now its taken 2-3 hours to do now.
I sold this front end for $1200 this was the buyer car, i did the fitting for him for $400 more so yeah pretty good deal for him

[DTN]

Does a jdm front conversion affect your insurance or not really? Thinking about doing the conversion some day lol.

[Johnie]

Does a jdm front conversion affect your insurance or not really? Thinking about doing the conversion some day lol.
Iv'e only had 3rd party so im not sure

[IEVAQ8]

Does a jdm front conversion affect your insurance or not really? Thinking about doing the conversion some day lol.

As if ur gonna destroy that mint P/Y itr...

[mattsrea]

hahahaha ^^ this!!

If your gonna get a jdm front end obviously you would take extra careful of it because the panels are very hard to come by not to mention pricey.

[EKVTIR-T]

Does a jdm front conversion affect your insurance or not really? Thinking about doing the conversion some day lol.of course it will,youre using front end pieces never sold in this market and arguably cost more

your company would need to be told of the mod and I reckon they wont like it too


but yellow jdm would look sick :thumbsup:

[ivseenwars]

Sprayed the lip.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/384589_471462642937188_734781227_n.jpg

[spn.fed]

^^ looks good :)
ive also got an oem lip that needs to be resprayed. Hopefully i get around doing it this weekend.

[Johnie]

Daytime shot of the jdm front end complete

http://www.ozhonda.com/forum/attachment.php?attachmentid=24911&d=1370023627

[spn.fed]

Got a dc2r muffler installed on my dc4 today :D


http://i40.tinypic.com/izbwgp.jpg

[ivseenwars]

Got rego! $650 gone :(
Took it up to Arthurs seat for the first time on Saturday, ****ing awesome.
Then to all stars :)
(pre meet pic)
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/7792_476718882411564_1301070824_n.jpg

[mattsrea]

Got rego! $650 gone :(
Took it up to Arthurs seat for the first time on Saturday, ****ing awesome.
Then to all stars :)
(pre meet pic)
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/7792_476718882411564_1301070824_n.jpg

ey ey nice work dude! You got your Ps already or you just rocking on them plates whilst still on Ls? :P

[Johnie]

Oil and oil filter change, droped oil on the rocket cover over the leads, so had to clean the bay the worst :/

[ivseenwars]

ey ey nice work dude! You got your Ps already or you just rocking on them plates whilst still on Ls? :P

Haha just rocking the P's man, makes life easier.

[mattsrea]

hahaha shifty! So you won't make it to this months ozhonda bundoora meet? Just rock up and blend in with the south east people haha

[ivseenwars]

hahaha shifty! So you won't make it to this months ozhonda bundoora meet? Just rock up and blend in with the south east people haha

Didn't know we were having one lol. Bundoora is over an hour from my place though. Guess I could give it a shot

[mattsrea]

Yeah dont worry just drive in a group if your worried and you'll be fine :)

[ivseenwars]

Yeah dont worry just drive in a group if your worried and you'll be fine :)

Yeah true

[dc2screama]

Sold!!
http://img.tapatalk.com/d/13/06/11/u7a5yju5.jpg

Didn't wanna let go, now for my next Honda

[Evok]

Front & Rear spoon strut in my c2 :)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/1005974_4980490602016_966851404_n.jpg

[mattsrea]

thats nice ma, hows the fitment of them enkei 92s? Any guard roll or camber? I herad they sit flush withou any work but just curious.

[Evok]

thats nice ma, hows the fitment of them enkei 92s? Any guard roll or camber? I herad they sit flush withou any work but just curious.


Their 15x8 +25 ....same as majority of wheels out their such as og's etc.
With that drop & 195/50/15 tyres they cleared just fine...i had a natural camber of 2.5-3 but i straighted it up to 2 and no scrub..
diy rolled guards and i pulled fender a bit.... :L dodgy hahaha

[mattsrea]

Their 15x8 +25 ....same as majority of wheels out their such as og's etc.
With that drop & 195/50/15 tyres they cleared just fine...i had a natural camber of 2.5-3 but i straighted it up to 2 and no scrub..
diy rolled guards and i pulled fender a bit.... :L dodgy hahaha

Damn really? I always thought guard rolled wasn't necessary or anything on Integras running 15x8 +25 because their guards are wide enough. Maybe on 195/45s wouldn't need guard roll or anything just natural camber. But nonetheless dude great clean car! Got anymore pics?

[charliebrown]

Sold!!
[IMG]http://img.tapatalk.com/d/13/06/11/u7a5yju5.jpg/IMG]

Didn't wanna let go, now for my next Honda

wut is this next honda m8

[ivseenwars]

Heyoooo!
http://imgc.classistatic.com/cps/blnc/130519/679r1/93709mb_20.jpeg
Tein street flex, ASR subframe brace & sway bar and some LCA's. Picking them up next week. :D

[EKVTIR-T]

is that teins ok? look like leak

[IEVAQ8]

r those lca's for ur ek???
if so, they wont fit,,,

[nate92]

r those lca's for ur ek???
if so, they wont fit,,,


nah his got a black vti-r yoooooooooooooo

[IEVAQ8]

nah his got a black vti-r yoooooooooooooo

ooopppsss

[spn.fed]

Heyoooo!
http://imgc.classistatic.com/cps/blnc/130519/679r1/93709mb_20.jpeg
Tein street flex, ASR subframe brace & sway bar and some LCA's. Picking them up next week. :D



niceeeee! . Just in time before Bundoora meet :D

[Johnie]

Bought this jdm dc2 wreak
Spent the day striping this jdm dc2
- Pulled off rear coilovers
- Half removed front coilovers
- Whole interor
- Headlights
- Wheels
Thats it so far. Tomorrow will remove tailights, rear bar, rear garnish and exhaust
http://firesport.com.au/images/236527_2013061414.jpg

[Setanta]

So leaving work a week ago proved to be eventful. Clutch hit the floor and I could feel the hydraulic pressure drop every time I used it. Through the various Hills suburbs I went, babying the clutch, driving slowly in second-third and rev matching trying to catch lights just right.

Looking at the clutch master cylinder, it was both empty and filthy - what looked like carbon build up inside. I checked the lines, then pulled off the slave/clutch rubber cover only to see fluid weeping from the piston end of the slave.

http://members.iinet.net.au/~setanta/dc2r/DSCN0311.jpg

Yonas at JDMYard hooked me up with a new slave and I got my tools out today.

Only to realise that the last time I did a brake/clutch line it was my '64 EH Holden and my spanners were all imperial.

Off to supercheap for proper line spanners (I've learned the hard way not to use regular spanners on lines) and fresh fluid and a one-man bleed unit.The E30 bonnet as a tool bench was optional.

http://members.iinet.net.au/~setanta/dc2r/DSCN0312.jpg

First step was to undo the pipe into the slave. Fortunately my spanner's length just fit into the fan shroud and turned without hitting the radiator. Easier than I guessed it would be. Next the two bolts holding the slave in needed a 12mm spanner on them as a ratchet would foul on the fan shroud. There are two ways of doing this, from the top (hard) from the bottom (easy). I of course didn't think to try it from the bottom. Off it came and promptly frll into the oil pan I had under the car.

http://members.iinet.net.au/~setanta/dc2r/DSCN0315.jpg

Lots of fluid on the gearbox and a little inside the dust cover. Gave it a clean up (and the OCD kicked in, I cleaned the bolts as well :D ) Got out the cue-tips and daughter's old toothbrush and cleaned the master cylinder cap that had carbon/grit inside it.

http://members.iinet.net.au/~setanta/dc2r/DSCN0319.jpg

Paper towel and cue-tips also took care of the master cylinder (couldn't get into the corners though - doesn't matter, it flushed out later on).

http://members.iinet.net.au/~setanta/dc2r/DSCN0317.jpg

Putting the slave back in was fiddly as the dust cover goes onto the slave, then you bolt it to the gearbox but first making sure the piston is seated in the clutch arm and that the line is seated. A few tries and it was all in. Putting the two bolts back required a bit of a jiggle to line the bolts up. As always, I couln't get the bolts to line up with the hole. Remembering what a mechanic mate had told me "Imagine it's your girlfriend" (innuendo implied) got both holes lined up easily enough (no inuendo implied!) and tightened it up. Dust jacket took a little finessing and then it was on to the bit I hate, bleeding the system.

Actually, now I'm starting to wonder if I'm talking about the car or not

http://members.iinet.net.au/~setanta/dc2r/DSCN0310.jpg

The one-man system is great, fill the master cylinder, half-fill the bottle attach small probe to the hose on the bleed-bottle and twist it into the bleed-nozzle. Back the nozzle off half a turn and put the bottle up higher than the slave (it has a nice magnet built into the bottle).

http://members.iinet.net.au/~setanta/dc2r/DSCN0320.jpg

Pump the clutch, top the master up, pump the clutch more, empty the bottle when full, rinse and repeat then snick the bleed closed. I went through just over a litre of fluid as I was flushing out all the crap that had been sitting in the system. By the end I finished with the lines clear This was the last of the crap:

http://members.iinet.net.au/~setanta/dc2r/DSCN0323.jpg

Master cylinder looking clean and clear:

http://members.iinet.net.au/~setanta/dc2r/DSCN0321.jpg

I then went back over everything to make sure I hadn't missed anything (or left tools in the engine bay), in the process realising that it would have been easier to get to the bolts from beneath. Clutch works nicely, engages smoothly and all is right in the world again. Not a bad effort for 3 hours work. It was possibly one of the easiest mechanical jobs I've done in a long time... so I've probably done something wrong :D

[mocchi]

nice bor, whre can i get those one man bleed magic

[Setanta]

My local auto store had it. Pretty damn cheap too (under 10 bucks).

[EG5]

Proper spanner is always good

[ivseenwars]

yewww, genuine itr gear knob :) coils going in soon
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/7943_484689041614548_2056750026_n.jpg

[jdmEG5]

did this while engine was out

$30 spray can job, turned out like so bawzzzzzzzz


http://m.ak.fbcdn.net/sphotos-f.ak/hphotos-ak-ash4/376035_10151451390047979_1731240008_n.jpg

and here it is with the motor in it ;

http://m.ak.fbcdn.net/sphotos-g.ak/hphotos-ak-prn1/945757_10151476947577979_260724583_n.jpg

[newpaddy3]

did this while engine was out

$30 spray can job, turned out like so bawzzzzzzzz


[img]http://m.ak.fbcdn.net/sphotos-f.ak/hphotos-ak-ash4/376035_10151451390047979_1731240008_n.jpg[/img ]

and here it is with the motor in it ;

[img]http://m.ak.fbcdn.net/sphotos-g.ak/hphotos-ak-prn1/945757_10151476947577979_260724583_n.jpg[/img ]

What did you spray princess?

[EKVTIR-T]

da engine bay

i can tell by the oversprays

[jdmEG5]

yuz de enjin bey

[viinnh]

injen bay?

[EKVTIR-T]

enjin room

[DTN]

Didn't do anything except take this pic

http://imageshack.us/a/img689/718/6xc9.jpg

thinking of doing a jdm front but not too sure lol

[Setanta]

Nice photo. I keep thinking JDM front too... but would only want to do it with new parts :S

[cbauto]

I've had a front in my garage for years.

HAvent gotten around to it.

[3RotaRX]

I did two jdm fronts in the last 3 days... I love doing it though.


*test fit*

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/1052257_10201585932874951_76909923_o.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1052407_10201585943515217_167964866_o.jpg

[Johnie]

Do it yellow jdm front is sex, this is my yellow one with recently fitted rota grids
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/1060406_10151496721297102_694578963_n_zpsaf836ea2. jpg (http://s296.photobucket.com/user/ju4t_0wn3d/media/1060406_10151496721297102_694578963_n_zpsaf836ea2. jpg.html)

[dc2r-0636]

Didn't do anything except take this pic

http://imageshack.us/a/img689/718/6xc9.jpg

thinking of doing a jdm front but not too sure lol

Jdm front looks good, but then you see a audm front like the above and you change your mind and now audm looks better !

[IEVAQ8]

Jdm front looks good, but then you see a audm front like the above and you change your mind and now audm looks better !

exactly wat I was thinking, sooo hard to find a clean mint genuine audm PY itr....

[u mad?]

Do it yellow jdm front is sex, this is my yellow one with recently fitted rota grids
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/1060406_10151496721297102_694578963_n_zpsaf836ea2. jpg (http://s296.photobucket.com/user/ju4t_0wn3d/media/1060406_10151496721297102_694578963_n_zpsaf836ea2. jpg.html)those wheels don't fit. mexican spec

[viinnh]

they can fit, just needs to be dumped.

[Setanta]

"Are you a Mexi-can or a Mexi-can't" is the correct answer

[iceey]

i got into this

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-19.jpg

so i got this =]

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-20.jpg

hopped on the integra buzz

[PHO]

dafaq happened there

You okay m8

[newpaddy3]

Shiiit, did insurance cover you?

[iceey]

dafaq happened there

You okay m8

A drunk driver crossed my path while he was turning right .. He pretty much turned into me when I was at the intersection .. Complete idiot

But yeah everything's all fine =]

[iceey]

Shiiit, did insurance cover you?

Yeah his insurance covered it all .. That's what made me make the switch to the dc series =] can't wait to start doing work on my new baby

[Mikecivic78]

Yeah his insurance covered it all ..
WTF?

Since when do insurance companies cover drunk drivers?

[Vvvtec]

As in, covered his car, not the drunk drivers car.

[Mikecivic78]

As in, covered his car, not the drunk drivers car.

I would imagine insurance would say getfktm8, and made the drunk pay for the repairs. The victim's insurance would chase him down, but the drinker's Insurance wouldnt have paid out (unless they thought he was sober) as old mate said.

[iceey]

WHat happened was as I was getting looked at by the ambos the guy called his son to
Pick him up (he lived in the area) .. The son handed me the details of his father and left with him .. The ambos tried to stop him but the told em to eff off

The cops can't breath test him at home so he got away with that .. And I was cheering coz the insurance still covered me

[cbauto]

Better for you that way

Won't teach him any lessons though

[Mikecivic78]

WHat happened was as I was getting looked at by the ambos the guy called his son to
Pick him up (he lived in the area) .. The son handed me the details of his father and left with him .. The ambos tried to stop him but the told em to eff off

The cops can't breath test him at home so he got away with that .. And I was cheering coz the insurance still covered me
seems legit

[Johnie]

New oil and plugs, getting way better fuel eco now $20 last me 200ks was getting 120-140ks before
Also got dc2r gear knob today
Forgot to take photo :/

[chubby steve]

http://i814.photobucket.com/albums/zz67/roach1187/IMAG0062_zpsb4cc7a2a.jpg
destroyed my cv all 3 bearings where broken

[cbauto]

How did that happen?

Obeying the law?

[PHO]

How did that happen?

Obeying the law?

redline dump with 18" yeah buddy

[chubby steve]

redline dump with 18" yeah buddy

haha nah still running stock 15s just took off quick and it broke 2 much power i guess haha

[Johnie]

Got defected
So looks like ill be putting stock wheels on today
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/967345_10151526755487102_1651751756_n_zpsa9f77164. jpg (http://s296.photobucket.com/user/ju4t_0wn3d/media/967345_10151526755487102_1651751756_n_zpsa9f77164. jpg.html)

http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/1059232_10151526770532102_101098658_n_zpse86bfe73. jpg (http://s296.photobucket.com/user/ju4t_0wn3d/media/1059232_10151526770532102_101098658_n_zpse86bfe73. jpg.html)

[u mad?]

why on earth did you have the mexican wheels on there in the first place? looked fukin shit.

no hate, just truth

[mattsrea]

lol u mad?

Unlucky Johnie

[Vvvtec]

Hes right lol

[Johnie]

i cleared the defect the same day, i went in to vicroads with vti-r stock blades, took them off now running 17x7 drifteks
The rotas are forsale if anyones interested im not running that much poke anymore
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/895339_10151527783447102_1836598147_o_zpsf0b8dbb7. jpg (http://s296.photobucket.com/user/ju4t_0wn3d/media/895339_10151527783447102_1836598147_o_zpsf0b8dbb7. jpg.html)

[ivseenwars]

Tein Street Flex DC2R coils, DC2R LCA's, ASR Sway bar/endlinks and ASR subframe brace. INSTALLED! Feels much more stable, but also much stiffer aha. Need to modify my front strut bar because it doesnt clear the coils on the tower. Damper n threads get in the way!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1319_498220753594710_1054922122_n.jpg

[Luke_Snape]

Lowered my da9 today. Finally. What do u guys think. Pedders lowering springs 1.5 inch
http://i226.photobucket.com/albums/dd61/Silly01_bucket/20130720_163336_zpsb2f2ba31.jpg

[mooshie]

Looks neat and tidy. Take the silly black lines off yr headlights though! Lol

[viinnh]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1002106_10200935625666452_1656645148_n.jpg

Bought a teg off my mate :D

[Super-DA9]

looks like davidvtecs 4dr

[u mad?]

is it 4door?

edit lmao u wizzrd n8?

[Super-DA9]

is it 4door?

edit lmao u wizzrd n8?

the wizard delivers.

http://sphotos-g.ak.fbcdn.net/hphotos-ak-prn2/1072246_10200940891718100_97637337_o.jpg

[viinnh]

LOL wtf, do you some how have me on fb?

[Super-DA9]

LOL wtf, do you some how have me on fb?

Nope I'm just a wizard m8
































































nah friend liked your photo lol.

[dc2screama]

K swapping this beast! Shhiieeett!

[Super-DA9]

doesn't it have a 1.6L D16A8??

[viinnh]

horrible automatic zc single cammmmmmmmm ...




























... with no vtakk

[mattsrea]

nice pickup dude! I like the whole 4 door look but the tail lights dont suit me for some reason.

[Cartoon]

Hooked up my fogs finally!

http://img.tapatalk.com/d/13/07/22/6e7ebuqu.jpg

[Super-DA9]

horrible automatic zc single cammmmmmmmm ...

ZC is the same as D16A8 which is twin cam.

Still, sounds horribly unfun haha.

Looks amazing though :thumbsup:

[newpaddy3]

horrible automatic zc single cammmmmmmmm ...

... with no vtakk

.... zc is dohc

[ctx]

Tein Street Flex DC2R coils, DC2R LCA's, ASR Sway bar/endlinks and ASR subframe brace. INSTALLED! Feels much more stable, but also much stiffer aha. Need to modify my front strut bar because it doesnt clear the coils on the tower. Damper n threads get in the way!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1319_498220753594710_1054922122_n.jpg

Got pictures of the rear with the ASR brace on? Haven't heard from your car in a while Alex, nice progress :D

[viinnh]

Nope, you can search it up ZC SOHC, its exactly like a y4 motor but more aggressive cam.

[PHO]

Nope, you can search it up ZC SOHC, its exactly like a y4 motor but more aggressive cam.

Good for boost

[neut]

Ill buy that 4 Door integra Off you :).

[mocchi]

Ill buy that 4 Door integra Off you :).

how about some update on dat eg thread abo

[iceey]

bought some koni damper adjustable's with pedders springs

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-22.jpg
http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-23.jpg

now she sit's like this =]

oh and i got some Rota Gt3's wrapped in potenza re001

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-24.jpg

cant wait to the back .. just need to save

[ivseenwars]

Got pictures of the rear with the ASR brace on? Haven't heard from your car in a while Alex, nice progress :D
Haha thanks man :) has been a while. Photo doesn't really do it justice but its all I have while I'm at work haha
http://img.tapatalk.com/d/13/07/24/uherynuj.jpg

[Super-DA9]

Haha thanks man :) has been a while. Photo doesn't really do it justice but its all I have while I'm at work haha
http://img.tapatalk.com/d/13/07/24/uherynuj.jpg

Looking really good mun :thumbsup:

[ivseenwars]

Looking really good mun :thumbsup:

Cheers!
Treated her to a detail the other day.
http://img.tapatalk.com/d/13/07/24/ega7yzav.jpg

[cph3r]

Failing at RTA bushings. Took them out without marking depth and clock on the trailing arm first. So new ones are going in with fingers and toes crossed I get it right :-( poo!

[viinnh]

Deposited on a K24A3 complete motor + box + shifter box + shifter cables the other day
http://i40.tinypic.com/fv8o4i.jpg

Bought DC2R clutch pedal set with project mu pedal overs for my manual conversion, will be mating it with s2k clutch master and k swap clutch line
http://i41.tinypic.com/2m5nxwo.jpg

Full size dual core aluminium radiator + fan
http://i44.tinypic.com/2j3p5z5.jpg

Also paid for K20A wiring harness and K20A midshaft

While I was at it placed an order for Hasport EGK3 and Rywire K-swap harness as it was a really good price !

[ivseenwars]

Deposited on a K24A3 complete motor + box + shifter box + shifter cables the other day
http://i40.tinypic.com/fv8o4i.jpg

Bought DC2R clutch pedal set with project mu pedal overs for my manual conversion, will be mating it with s2k clutch master and k swap clutch line
http://i41.tinypic.com/2m5nxwo.jpg

Full size dual core aluminium radiator + fan
http://i44.tinypic.com/2j3p5z5.jpg

Also paid for K20A wiring harness and K20A midshaft

While I was at it placed an order for Hasport EGK3 and Rywire K-swap harness as it was a really good price !

You really don't do things in halves do you

[chubby steve]

took the car down drags tonight. 1st run, did my burn out, took off bit of wheel spin and then BOOM broke something in the gearbox. had to get towed home poor me

[Vvvtec]

Deposited on a K24A3 complete motor + box + shifter box + shifter cables the other day
http://i40.tinypic.com/fv8o4i.jpg

Bought DC2R clutch pedal set with project mu pedal overs for my manual conversion, will be mating it with s2k clutch master and k swap clutch line
http://i41.tinypic.com/2m5nxwo.jpg

Full size dual core aluminium radiator + fan
http://i44.tinypic.com/2j3p5z5.jpg

Also paid for K20A wiring harness and K20A midshaft

While I was at it placed an order for Hasport EGK3 and Rywire K-swap harness as it was a really good price !
Fuk yeah man, good shit!


took the car down drags tonight. 1st run, did my burn out, took off bit of wheel spin and then BOOM broke something in the gearbox. had to get towed home poor me

bad luck dude

[Rayseuro04]

Picked up a DC5R last night :)

http://i1260.photobucket.com/albums/ii580/rays2701/0234_zpsedc83d53.jpg

Need new headlights ASAP mine are pretty f*cked the lenses have bad sun damage. So if anyone has a set they want to get rid of let me know ASAP.

[Super-DA9]

Picked up a DC5R last night :)

http://i1260.photobucket.com/albums/ii580/rays2701/0234_zpsedc83d53.jpg

Need new headlights ASAP mine are pretty f*cked the lenses have bad sun damage. So if anyone has a set they want to get rid of let me know ASAP.

Faaark luks so gud. Moar pics pls!

[viinnh]

You really don't do things in halves do you

LOL what does that mean

[cph3r]

Got my hard race rta bushings in. They were bs.i shouldn't have to grind the right taper into a brand new part -.-

[Super-DA9]

Got my hard race rta bushings in. They were bs.i shouldn't have to grind the right taper into a brand new part -.-

I had to do the same. Pressed them in after that.

They perform really well though.

[mocchi]

same in dc2
pressed in fine in my eg but.
weird

[cph3r]

I had to do the same. Pressed them in after that.

They perform really well though.

They bloody better! If I never have to do them again I'll die a happy man. On another note, my hard race adjustable camber and toe arms came in =-D now I can put the car back together. New ES bushings, hard race arms and rta bushings, New rotors and Koni/GC coilovers at 430/350. Car should feel amazing

[Evok]

They bloody better! If I never have to do them again I'll die a happy man. On another note, my hard race adjustable camber and toe arms came in =-D now I can put the car back together. New ES bushings, hard race arms and rta bushings, New rotors and Koni/GC coilovers at 430/350. Car should feel amazing

Ye i noticed a big difference with new rta bushings.

what camber & toe u guna run?

[newpaddy3]

Picked up a DC5R last night :)

http://i1260.photobucket.com/albums/ii580/rays2701/0234_zpsedc83d53.jpg

Need new headlights ASAP mine are pretty f*cked the lenses have bad sun damage. So if anyone has a set they want to get rid of let me know ASAP.

Are the headlights cracked or just misty?

Try polishing them.

[Rayseuro04]

^ The headlights were just misty and yellow form being parked outside its whole life. I picked up a meguairs headlight restoration kit on the weekend and gave it a go:

http://i1260.photobucket.com/albums/ii580/rays2701/002_zps9466e5ab.jpg

I dont have any before pics but it was really bad and this kit worked really well and only took me about 30mins to do both lights :)

[cph3r]

Ye i noticed a big difference with new rta bushings.

what camber & toe u guna run?

Not sure yet. Only got them because it was just as expensive to get them as it was to order bushings alone from the states. In for alignment this week when I get my federal 595 rs-r's fitted :-D

[Evok]

Not sure yet. Only got them because it was just as expensive to get them as it was to order bushings alone from the states. In for alignment this week when I get my federal 595 rs-r's fitted :-D

woo ima get a set of those soon too! hi5.

Im rolling -2 f, -1.5r camber atm....it handles alrite but i get some understeer with my current tyres thats on 55 percent nt555.

[cph3r]

*hi-five*
Am very interested to experience how much of a difference they will give over the Bridgestone RE002. Friend ordered a set at the same time for his WRX and says they are much much stickier, but take a bit more to warm them up, which is nothing short of what i was expecting.

[Vvvtec]

I have a set of the RS-R's myself

They an excellent street tyre, very sticky indeed ;)

[viinnh]

Got my K20A midshaft today
http://i40.tinypic.com/r9ipt3.jpg

Also got the K20A engine harness and charge harness
http://i39.tinypic.com/2eaj537.jpg
http://i42.tinypic.com/ne92zb.jpg

Still waiting for motor to be removed from wreak... hopefully tomorrow ill get it !

Boot of shit waiting for the motor
http://i41.tinypic.com/519apz.jpg

[Vvvtec]

good shit man

I have a brand new k20 knock sensor to match that k20 harness you have there if you need it let me know

[Mikecivic78]

I have a set of the RS-R's myself

They an excellent street tyre, very sticky indeed ;)

Sorry to argue with you Arex, but excellent street tyre they are not.

Wear rating of 140, potentially dangerous in wet, loud as, uncomfortable ride, and the need to warm them up in order to unlock that stickiness (hard to do on the streets!) an excellent street tyre it does not make. inb4 time for new rubber.

You oughta experience the F1 Eagle asymmetric 2 I got on my car. Now that's a truly excellent street tyre. RSR is for weekend track warrior with no consideration to wear or NVH who uses car as part-time daily.

[newpaddy3]

Sorry to argue with you Arex, but excellent street tyre they are not.

Wear rating of 140 (because race car), potentially dangerous in wet (good for hecktic drifts), loud as (because awesome stuff grabs your attention), uncomfortable ride (it's a fantastic ride because the sidewalls are stiffer, no one likes a limp dick), and the need to warm them up in order to unlock that stickiness (hard to do on the streets! (In what scenario do you need to unlock that stickiness on the streets, brb heading out to touge) ) an excellent street tyre it does not make (it's a nice tyre for people who like a more track orientated feel). inb4 time to buy a race car.

You oughta experience the F1 Eagle asymmetric 2 I got on my car. Now that's a truly excellent street tyre. RSR is for weekend track warrior with no consideration to wear or NVH who uses car as part-time daily.

fixed

[Mikecivic78]

^race tyres - because street car

...and hectic drifts in a FF

http://i43.tinypic.com/1zlrcb6.jpg

[Vvvtec]

Sorry to argue with you Arex, but excellent street tyre they are not.

Wear rating of 140, potentially dangerous in wet, loud as, uncomfortable ride, and the need to warm them up in order to unlock that stickiness (hard to do on the streets!) an excellent street tyre it does not make. inb4 time for new rubber.

You oughta experience the F1 Eagle asymmetric 2 I got on my car. Now that's a truly excellent street tyre. RSR is for weekend track warrior with no consideration to wear or NVH who uses car as part-time daily.

They suit my needs perfectly which makes them an excellent street tyre.

If i had of said 'excellent all round daily comfortable therefor slightly compromised tyre', well then, that you can argue.

I understand where you are coming from, and im sure there are many better tyres out there.

But my personal experience with them is awesome lol I love them, they are great

[Super-DA9]

RSR great performance for what you pay. Got them on my DC2 as well. Not hard to warm up on mountain roads.

Would recommend to anyone looking for an entry level street semi :thumbsup:

[PHO]

Eagle f1 ass2 dont even come in 15/16. Not available for vvvtec as hes 15"

Lol

[Mikecivic78]

They suit my needs perfectly which makes them an excellent street tyre.

If i had of said 'excellent all round daily comfortable therefor slightly compromised tyre', well then, that you can argue.

I understand where you are coming from, and im sure there are many better tyres out there.

But my personal experience with them is awesome lol I love them, they are great

as long as ur happy with 'em, that's all that matters. Track and drags are where they shine though


Eagle f1 ass2 dont even come in 15/16. Not available for vvvtec as hes 15"

Lol

A shame really, they are extremely goot

[newpaddy3]

^race tyres - because street car

...and hectic drifts in a FF

[IMG]http://i43.tinypic.com/1zlrcb6.jpg[/IMG ]

They're not race tyres lol.

They are not R compound so technically aren't semi slick. They are a street tyre.

Ass sliding is good fun in a FF.

[Vvvtec]

as long as ur happy with 'em, that's all that matters. Track and drags are where they shine though



A shame really, they are extremely goot

How many km's did you get out of yours? People talk about them as if they're made from jelly lol

[newpaddy3]

I've had mine for over a year. Have a tonne of tread left.

Inb4 I hardly drive.

[Vvvtec]

I've abused mine for just under 20xxx km's lol and mine are still good too

I think people expect 100,000km's out of them lol

[Mikecivic78]

How many km's did you get out of yours? People talk about them as if they're made from jelly lol

So far I've only done about 1000. Depends on how u drive and camber etc, but they have a wear rating of 300 as opposed to 140 for RS-R. If you've done 20,000 and still going is pretty darn good - how much life left?

[Vvvtec]

I mean how much did you get out of your RS-R's sorry haha

[chubby steve]

turns out wasnt my gearbox thank god just another broken cv

http://i814.photobucket.com/albums/zz67/roach1187/IMAG0066_zps8b3ac766.jpg

[mocchi]

oem or aftermarket shaft?

[cbauto]

Fark.which car was this Steve?
I dunno if you know me, I bought vrs kit off you a while ago.

Glad to see you obey the law when you drive.

[rhys.l]

So far I've only done about 1000. Depends on how u drive and camber etc, but they have a wear rating of 300 as opposed to 140 for RS-R. If you've done 20,000 and still going is pretty darn good - how much life left?

I've done around 15 000km on mine rocking -2 to -2.5 camber and I can probably get another 5000km out of them. Not bad in my opinion.

[viinnh]

My mate bought a walbro 255 fuel pump, didnt use it so i bought it off him
http://i39.tinypic.com/30kfvw9.jpg

then got some second hand PLM headers 4-2-1 for a decent price
http://i43.tinypic.com/21livls.jpg

got bored lol, had blast pipes from my r33
http://i41.tinypic.com/vfbayo.jpg
http://i42.tinypic.com/2mczwu9.jpg

[chubby steve]

oem or aftermarket shaft?
it was an oem shaft


Fark.which car was this Steve?
I dunno if you know me, I bought vrs kit off you a while ago.

Glad to see you obey the law when you drive.

yeh i remember u mate hows things its a dc2 with built b18c2 dnt no y im breaking cvs its not as if im running heaps of power

[IEVAQ8]

it was an oem shaft



yeh i remember u mate hows things its a dc2 with built b18c2 dnt no y im breaking cvs its not as if im running heaps of power

go and get ur alignement re-done and maybe have ur bushes checked....
also, u can try traction bars which will stop the movement/flex

[iceey]

Ran my car at the creek last night .. Pretty happy to make It into the 15's bone stock

[chubby steve]

go and get ur alignement re-done and maybe have ur bushes checked....
also, u can try traction bars which will stop the movement/flex

all bushes r all new. was looking at traction bars cheaper alternative to new tyres haha ill go get the wheel alignment checked thanks:thumbsup:

[cph3r]

http://img.tapatalk.com/d/13/08/08/emupubag.jpg

[Vvvtec]

nice!

what spring rates on the koni's?

[PHO]

Fuark wtb asr 24mm bbc.

[Super-DA9]

I watched mine leave garage this morning for the first time in like 8 months on a truck to the exhaust shop.

[cph3r]

nice!

what spring rates on the koni's?

430 front 350 rear :-)

[viinnh]

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/1157408_10201056514248591_792188078_n.jpg

New wheels and sprayed indicator red

[cuppa]

lol, always with the baller spec mate.

[cph3r]

Finally got to drive the teg after koni/gc and asr 24mm sb and brace install. Holy hell what a difference! Albeit, pre-alignment, it feels like a go-kart. Nearly did a u-turn going around a roundabout because it just wanted to keep turning. Body roll is virtually non existent and if i didn't know better, it feels more akin to AWD in my friends WRX than a FWD Honda.

[Harris]

i want to spray my indicator too, it looks more clean

[Harris]

http://www.youtube.com/watch?v=rawvJop772E
did this today, my throttle has always been not very responsive, best 5 minute ever spent on my car and also cleans my throttle body. very happy with result

[ivseenwars]

DC2R wing painted and fitted:
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/1167129_508738359209616_2046399863_o.jpg

[Super-DA9]

^^

Hnnnnnggggggg

I got the engine I built for my DC2 running today, just gotta get it run in and tuned now. Fingers crossed.

[cbauto]

this was done about a month or two ago.

https://dl.dropboxusercontent.com/u/127024375/2013-07-23%2018.23.51.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-23%2017.57.41.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-23%2017.57.41.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-24%2014.53.28.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-24%2014.53.43.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-24%2016.20.45.jpg

[mocchi]

nice.

[cbauto]

nice.
pm cbauto

if you need body work, pm cbpaint&panel.

or pm mocchi

[charliebrown]

DC2R wing painted and fitted:
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/1167129_508738359209616_2046399863_o.jpg

hey bro can you clear your inbox?

[ivseenwars]

hey bro can you clear your inbox?

Cleared

[ctx]

Nice alex

[Vvvtec]

Thanks erok

[infurNOS]

Drove it for the first time in 4 weeks due to being overseas!

[dc2r-0636]

DC2R wing painted and fitted:
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/1167129_508738359209616_2046399863_o.jpg

Looked better with no wing. Now it just looks like a mock up type r

[Cartoon]

I got a cage today. Well I picked my car up with the cage in it :)

http://img.tapatalk.com/d/13/08/14/dusuhuqy.jpg

[mocchi]

niceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Cartoon]

niceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Thanks mate. Cams spec with papers :)

[PHO]

Drove it for the first time in 4 weeks due to being overseas!

Do you want to keep it now? Haha.

[grifty]

this was done about a month or two ago.

https://dl.dropboxusercontent.com/u/127024375/2013-07-231.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07.57.41.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-2357.41.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-014.53.28.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-24%3.jpg

https://dl.dropboxusercontent.com/u/127024375/2013-07-6.20.45.jpg

Nice work mun, I did the same recently, resprayed the metal plate inside, new foam and also sealed up some bits with aluminium tape. U got that dash in yet mun?

[vhpete]

Brought an Integra type S today :D

[cbauto]

Bought

[Vvvtec]

maybe he took it somewhere

[ivseenwars]

Looked better with no wing. Now it just looks like a mock up type r

I only have wing and lip so not really bor. if I get bored of it all I have to do is take it off n stick some grommets on. Exact reason why I didn't fill boot holes.

[dc2r-0636]

Visually that's all there is on a dc2r that's different. Lip and wing (and wheels with 5stud)

Looks good but looked better and sleek with no wing

[viinnh]

added number plate tilt from my old EK and got a full CF bonnet as it has 2 parts that rises, hopefully it will clear the K

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/1176343_10201087491703008_47515690_n.jpg

[Super-DA9]

CF bonnet looks like it fits good, SEIBON? Mu Secret?

[Super-DA9]

I got a cage today. Well I picked my car up with the cage in it :)

http://img.tapatalk.com/d/13/08/14/dusuhuqy.jpg

Holy shet. Hnnng at everything in this pic.

[tripleuse]

I got a cage today. Well I picked my car up with the cage in it :)

http://img.tapatalk.com/d/13/08/14/dusuhuqy.jpg


cant believe this is finished, i remember 2 years ago speaking about your build, what did it end up getting on the dyno, would love to see it.

[Cartoon]

cant believe this is finished, i remember 2 years ago speaking about your build, what did it end up getting on the dyno, would love to see it.

Just getting it engineered at the moment. And then fit the lip kit an ok almost done lol.

Still a few things I wanna do but she is looking good and runs :)

164 on the dyno ATM. Still needs a fine tune or street.

[cbauto]

maybe he took it somewhere

Maybe she just doesnt know the difference between bought and brought.

[cbauto]

Nice work mun, I did the same recently, resprayed the metal plate inside, new foam and also sealed up some bits with aluminium tape. U got that dash in yet mun?

Nah.

Still bare firewall at the moment.

Finished taking it apart. Putting it all back together whenever I get some spare minutes.

[tripleuse]

Just getting it engineered at the moment. And then fit the lip kit an ok almost done lol.

Still a few things I wanna do but she is looking good and runs :)

164 on the dyno ATM. Still needs a fine tune or street.

nice figures, all the best man.

[Johnie]

Both my jdm dc2s, got damaged
Blew gearbox on this one, my other dc2, lost control in the heavy rain,understeered,hit the gutter cracked 1 rim and surrounding parts around the lca is 100% bent
On the plus side i just bought a r34 skyline so not driving a honda for a while
http://www.ozhonda.com/forum/attachment.php?attachmentid=25505&d=1376824378

[viinnh]

My mate was driving my car got RDT, during the wait my car got defected
http://distilleryimage0.ak.instagram.com/0a49ce4006ee11e387c922000aeb0d21_7.jpg

[bart2]

Both my jdm dc2s, got damaged
Blew gearbox on this one, my other dc2, lost control in the heavy rain,understeered,hit the gutter cracked 1 rim and surrounding parts around the lca is 100% bent
On the plus side i just bought a r34 skyline so not driving a honda for a while

stop trying to drift all your hondas

[Vvvtec]

Both my jdm dc2s, got damaged
Blew gearbox on this one, my other dc2, lost control in the heavy rain,understeered,hit the gutter cracked 1 rim and surrounding parts around the lca is 100% bent
On the plus side i just bought a r34 skyline so not driving a honda for a while
http://www.ozhonda.com/forum/attachment.php?attachmentid=25505&d=1376824378

that skyline has no idea what its in for lol

http://stream1.gifsoup.com/view6/3168534/praying-baby-o.gif (http://www.google.com.au/url?sa=i&rct=j&q=&esrc=s&frm=1&source=images&cd=&cad=rja&docid=_NsjUwYJqYZxBM&tbnid=6VawwSBbwqe6aM:&ved=0CAUQjRw&url=http%3A%2F%2Fhfboards.hockeysfuture.com%2Fshow thread.php%3Ft%3D1437609&ei=JsYQUoKcGofzlAWgnoHQCA&bvm=bv.50768961,d.dGI&psig=AFQjCNGkN6iFXY5MO4EH9f9fBa1In90LLw&ust=1376917361292953)

[PHO]

doesnt know how to drive and shift. lmzo

luckily the rb25 boxes can take a beating.

[u mad?]

cracked my sump fuuuuuuuuuu

[u mad?]

My mate was driving my car got RDT, during the wait my car got defected
http://distilleryimage0.ak.instagram.com/0a49ce4006ee11e387c922000aeb0d21_7.jpg

thats what happens with silly wheels

[viinnh]

cracked my sump fuuuuuuuuuu

Thats what happens with silly height

[EKVTIR-T]

thats what happens with silly wheels


Thats what happens with silly heighthttp://s24.postimg.org/5fsdvkizp/1150998_620325224666625_536580315_n.jpg

[Super-DA9]

Dat K20 sump hangs really low, much lower than B series

[tripleuse]

Dat K20 sump hangs really low, much lower than B series

really isnt that bad, unless they are sitting at something ridiculous like 60mm? 'umad' how low was your car at the time?

[PHO]

really isnt that bad, unless they are sitting at something ridiculous like 60mm? 'umad' how low was your car at the time?

he was at a responsible height (fairly higher than 100mm from lowest point), just that he caught a huge rock under the car that he didn't see and tore his sump.

[cbauto]

Was too busy with phone trying to get a cluster vid.

Not concentrating on the road.

[Darmanin]

added number plate tilt from my old EK and got a full CF bonnet as it has 2 parts that rises, hopefully it will clear the K

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/1176343_10201087491703008_47515690_n.jpg


My mate was driving my car got RDT, during the wait my car got defected
http://distilleryimage0.ak.instagram.com/0a49ce4006ee11e387c922000aeb0d21_7.jpg

Is the number plate tilt illegal?

[mattsrea]

Yes it is, number plates are meant to be positioned straight and in clear view for them speed cameras lol

[u mad?]

Thats what happens with silly height

not silly height

just went off roading lol

sharp ass rock

[Johnie]

Silly height or not, i was defected on stock height as apparently it says i was too low, goes to show cops can defect u for anything, cleared in within 12 hours without changing anything besides to stock wheels.

[iceey]

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-25.jpg

Goes to show highway patrol are just plain wank?rs
And can pretty much defect you for anything


Customer came in to clear a defect for one high beam
Out and one brake light out

[charliebrown]

lights not working is pretty serious? at least once a week ill be behind some fuker with 3 brake lights out.

[newpaddy3]

lights not working is pretty serious? at least once a week ill be behind some fuker with 3 brake lights out.

Need one of these.

http://imgc.classistatic.com/cps/blnc/130218/943r1/0312i3g_20.jpeg

[cbauto]

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-25.jpg

Goes to show highway patrol are just plain wank?rs
And can pretty much defect you for anything


Customer came in to clear a defect for one high beam
Out and one brake light out

Some people drive around and have absolutely no idea.

Cars with brake light constantly on, no brake lights, no tail lights.
Drive at night with no lights on.

No one cares if you can see where you're going or not. At least make yourself visable so people can steer clear

[cbauto]

Also probably driving like a wanker to get pulled over in the 1st place. But who knows

[ctx]

http://i1160.photobucket.com/albums/q495/xXiceeyXx/image-25.jpg

Goes to show highway patrol are just plain wank?rs
And can pretty much defect you for anything


Customer came in to clear a defect for one high beam
Out and one brake light out

You deserve to be defected if your headlights AND brakelights aren't working. Even if it's just one of them

Agree with the hwp on defect

[Vvvtec]

Its only a minor defect too. Nothing to complain about.

Cop was 100% correct to give that defect notice.

[tripleuse]

Silly height or not, i was defected on stock height as apparently it says i was too low, goes to show cops can defect u for anything, cleared in within 12 hours without changing anything besides to stock wheels.




Goes to show highway patrol are just plain wank?rs
And can pretty much defect you for anything
Customer came in to clear a defect for one high beam
Out and one brake light out

of course they can, if they feel its a not roadworthy they can issue defects. Why is this a suprise to people? Ive come to the conclusion that its the attitude of drivers that decides if they get defected or not.

[mocchi]

loooooll brought bought
nice

[itsdannyy]

Just got my clutch changed to a exedy heavy duty clutch today. Feels much better after driving with a dead clutch for a month lmao.

[dc2screama]

Looks like il be back here!;)

[viinnh]

Did battery relocation today as I was feeling motivated.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/1176157_10201202233771488_374918653_n.jpg

Battery box and battery in boot.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/q81/s720x720/1175256_10201219729608873_1948477384_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/q74/s720x720/542237_10201219730248889_1661332891_n.jpg
0 Gauge wire onto terminal.

0 Gauge IN to 2x8 2x4 and 1x2 Gauge OUT power distribution block.
(0 gauge from rear to front into distro block then took the old battery terminal off and shoved those wires into the distro block)
Will later on get the moroso jumper terminals and run a wire to the distro as well. Very useful :P
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/q86/s720x720/1234438_10201219732648949_1647523817_n.jpg

While rear seats were out decided to change the fuel pump to a 255
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q74/s720x720/1238001_10201219732168937_363316359_n.jpg

IN!!!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/q75/s720x720/1239726_10201219732368942_76521793_n.jpg

Also got my golden eagle fuel rail today off vvvtec but i didnt like the purple so..
Basecoat silver
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/1016110_10201219732728951_748628045_n.jpg

Then blueeeeee
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/q81/s720x720/1239418_10201219733328966_363767805_n.jpg

Really wanted to install my amp and sub today but I can't seem to find my RCA cables lol. Whole point of relocating battery today was to install the system..

http://www.reachingcampus.com/wp-content/uploads/2013/05/thats-all-folks-7172-1280x800.jpg

[u mad?]

why battery in boot?
its actually worse for performance in a ff

[newpaddy3]

why battery in boot?
its actually worse for performance in a ff

Not in reverse bor.

Think about that for a second.

heuheuheu

http://i.imgur.com/HKA7a8I.jpg

[cbauto]

why battery in boot?
its actually worse for performance in a ff

Bcos audio.

I once had battery in boot with mrlazy

[viinnh]

Bcos #wiretuck #shaved #clean #stance #k24 #allshownogo #hardparker #notdailydriven

[mocchi]

180 benny watts easy

[infurNOS]

How much work involves relocating battery?

[Cartoon]

I picked mine up from the engineer today :)

[cbauto]

How much work involves relocating battery?

How good a job?

Can range from 5 minutes to 3 hours.

[viinnh]

How much work involves relocating battery?

Hey man, I didnt tuck anything in the engine bay yet so its pretty much like wiring up a amp.

Running a 0 gauge from front to rear, adding a terminal to the rear end of the cable and bolting battery box + putting battery in and grounding it anywhere.

Then at the front chop off the terminal on positive and either solder/crimp/join to the 0 gauage or how ever you want to do it to get it to stick together lol.
I just bought a power distribution block so its all plug in no dodgey shit, and this opens up slots for other power supply in the future.

I didn't tuck the fuse box under dash yet as ill do that when I do the kswap so I can change harness over and pull the headlight harness back in the car and run it through door jambs to the front.

[Super-DA9]

I fitted this today

http://sphotos-b.ak.fbcdn.net/hphotos-ak-frc3/1049122_10151686136913742_263845159_o.jpg

[charliebrown]

^needs more beaks

[u mad?]

nice bro

glad its not anodized

bet it turns in sooo much better

[u mad?]

^needs more beaks

disgusting piece of shit

[Super-DA9]

nice bro

glad its not anodized

bet it turns in sooo much better

Yeah man, no bright colours. Just plain old silver. Wanted black so it wouldn't stand out at all but JDMyard were out when I was up there.

Turns in nicely now for sure.


disgusting piece of shit

lol yeah beaks bars are pointless aye

[mocchi]

I fitted this today

http://sphotos-b.ak.fbcdn.net/hphotos-ak-frc3/1049122_10151686136913742_263845159_o.jpg

fuark ballin bro

[Integra-GSi]

Bcos audio.

I once had battery in boot with mrlazy

Shifting 10kg worth of weight to the rear of the car is going to make less of a difference than the driver sitting in the front of the car. It's pointless when you can just run a 10 gauge wire to your boot, but whatever. Neither really here nor there... You probably affect the weight distribution more having 50kg worth of amps, sub woofers and other useless crap in your boot.

You're only young once though, so live large and prosper.

[u mad?]

im liking this new guy

[cbauto]

Shifting 10kg worth of weight to the rear of the car is going to make less of a difference than the driver sitting in the front of the car. It's pointless when you can just run a 10 gauge wire to your boot, but whatever. Neither really here nor there... You probably affect the weight distribution more having 50kg worth of amps, sub woofers and other useless crap in your boot.

You're only young once though, so live large and prosper.
thank

[Integra-GSi]

You're welcome...

[cbauto]

Your welcome...
You're

Its not my welcome

But thank for making me welcome.

[Integra-GSi]

pedant... :p

[cbauto]

pedant... :p
I am actually.

ek9 pedals for sale
dc2r pedals in.
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2011.04.50.jpg


https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2010.42.53.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2010.50.04.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2013.49.49.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2014.24.48.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2015.15.41.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-09-09%2015.24.33.jpg

All cleaned, greased, adjusted.
No more sticky temperature control.

pm cbauto

[u mad?]

grouce job matey

[cbauto]

old links moved so i'll post it again, sorry.



a few months ago.
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-01-02%2017.23.45.jpg


ep3r seats for the dc2
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-02-05%2018.43.59.jpg


washed and drying.
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-02-06%2008.44.02.jpg


Little precious
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-04-03%2018.03.26.jpg


Slow progress
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-06-19%2016.40.55.jpg


more progress
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-23%2016.49.53.jpg



painting
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-23%2017.57.41.jpg



primed.
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-23%2018.23.51.jpg



fan box
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-24%2014.53.28.jpg

https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-24%2014.53.43.jpg

Cleaned
https://dl.dropboxusercontent.com/u/127024375/forum%20links/2013-07-24%2016.20.45.jpg

[Cartoon]

I finally to my car for a drive today. First time being registered with the k24. Took a photo of my lovely dash to http://img.tapatalk.com/d/13/09/15/5yreraru.jpg

[Super-DA9]

How was it dude?

Those gauges look awesome. I think I asked you about the tacho a while back haha.

[cbauto]

Can we please have a close-up daylight picture of the dash ?
I finally to my car for a drive today. First time being registered with the k24. Took a photo of my lovely dash to http://img.tapatalk.com/d/13/09/15/5yreraru.jpg