***Official What did you do to your Integra today***

[cph3r]

Better shot of the antenna :-)
http://tapatalk.com/mu/76d1f18f-2db7-d9e2.jpg

[Dubstein]

^^ Pretty ballin :)

Im shaving mine sooner or later. Don't need that radio, ever. Aux ftw.

[charliebrown]

Not feelin the headlights and parkers dude... go white LEDs that match the lo. Leave the blue parkers to the commis

[Dubstein]

Not feelin the headlights and parkers dude... go white LEDs that match the lo. Leave the blue parkers to the commis

+1 Hahaha

[CivicEGSI]

I dont mind the look. I mean not a scorchingly bright blue.. But white with a tinge of blue is nice :3

[Dubstein]

Guess who just purchased new kicks? :3

[Lukey]

whatd u get? any pics?

[TGW92]

Washed, claybarred, waxed and took off my dc2r wing cos i was sick of not being able to see the faces of those behind me without bobbing up and down. Safety first :D

AHAHAHahAHHAHHA

I dunno what else to say.... so awesome because it's true XD

OT: washed the car in 25 minutes with Meguiar's Wash N Wax; looks so nice and shiny now :)

[cph3r]

Not feelin the headlights and parkers dude... go white LEDs that match the lo. Leave the blue parkers to the commis

I agree completely. They're very blue. In saying that, they're an improvement over oxidized yellow

[CivicEGSI]

I want new kicks!!! Mine got brutalised last night :/

[Dubstein]

^ Haha idk if you answered me or not, mobile Facebook is being ridicules.. Get laid? :P

[CivicEGSI]

Hahahhahahahaha ssuuuuussssssss. Integra thread kgo.

[45SET]

Fit a set of Ohlins DFV's, removed front guard lining... and dumped it so front and rear tyres are tucking...

also did a minor service.

[Lukey]

pics?

[45SET]

pics?

You'd think starting at 10am that you'd be done before it gets dark...

You'd guess wrong. Pic's shall be up/taken tomorrow.

[Indie]

Sigh. If I wasn't saving for a trip, I'd have something to contribute. As it is, I haven't touched my half-completed car for months.

What were your old wheels, Dubstein? Up for sale? :P

[CivicEGSI]

Hahahaahahaha advanti medusa's 17", I'd hope you wouldn't disgrace a teg with them xD

[integragsi96]

cant really say today but yesterday i gave my car a service with nulon 10w40 full synthetic!
car runs so much better now.

[CivicEGSI]

Whats better for a honda 10w30 or 10w40??

[charliebrown]

What's the differences for using synthetic? Besides the ridiculous price... i'm not sure what mine is. It says "combined with synthetic technology" so im guessing it's semi-synthetic? 10w-40 btw. only ever used this so not sure what the differences are, but good price, especially when on sale

[Super-DA9]

Whats better for a honda 10w30 or 10w40??

all depends on the condition of you're motor. usually most 90's hondas will burn 10W30 under heavy driving because it's thin and tends to burn on high revving engines with a bit of milage on them.

the first number, in this case 10W, represents the base thickness of the oil. the higher the number, the thicker the oil is to start with, and the lower it is the thinner. most cars come out new with a 10W oil in them, or in some cases 5W.

the second number in this case, 30 represents how much the oil thins out under heat (high rpm, hot temperatures). the higher the second number, the less the oil thins out under heat and high RPM, which is a common cause of oil burning and blue smoke at high RPM. so with high RPM engines usually it's better to have something higher then 30 unless it's pretty new or really low kms i guess.

here's a range of popular oil viscosities in an order of thinner oils to thicker oils:
0W40, 5W30, 5W40, 5W50, 10W30, 10W40, 10W50, 15W40, 15W50, 20W50, 20W60

the best way to pick the right oil thickness for your car is experimenting on which oils burn and which don't.

say if you have a 10W40 oil in your engine, and it burns easily then it's time to step up to a 15W thickness. however if it only burns at the very top end then instead of a 10W40, you could use a 10W50, as it doesn't thin out as easily and can handle higher temperatures.

another thing to look for is oil "grade", this represents the quality of the oil in terms of friction modifiers, detergents etc. it is written on the back of the bottle in fine print and will be two letters beginning with S, for example "SL". the way you read it is the further the second letter is towards "Z" in the alphabet, the higher the oil quality is, or the richer in additives I guess you could say. the highest I've seen mineral oil is "SN" and synthetics go as high as "SM". generally I try to pick an SM grade synthetic for my car.

hope this helps give a better understanding :)

[Super-DA9]

What's the differences for using synthetic? Besides the ridiculous price... i'm not sure what mine is. It says "combined with synthetic technology" so im guessing it's semi-synthetic? 10w-40 btw. only ever used this so not sure what the differences are, but good price, especially when on sale

if it says "combined" then it is semi-synthetic.

mineral oils are the basic oil design. affordable, comes in a large range of viscosities and can reach a slightly higher grade then synthetics. (SN)

synthetics are an oil thats designed to be fast flowing, and keep the inside of your engine clean of sludge, but are expensive.

semi-synthetics are a mineral oil with an infused blend of synthetic, designed to be a good balance between the two or a more affordable alternative to synthetic.

[charliebrown]

What do you mean by 'burns oil'? Like as in your oil level drops?

and i can't find the grade on the back of my bottle :( no fine print!

and ONTOPIC! hoping the weather clears up a bit so i can attach my rear visor

[Super-DA9]

What do you mean by 'burns oil'? Like as in your oil level drops?

and i can't find the grade on the back of my bottle :( no fine print!

when oil level drops at an abnormal rate and you don't have any leaks, or drops significantly after driving it hard, or you're car lets out blue smoke at high rpm, it's burning.

what oil do you have? I'll tell you it's grade. and it will be on the back somewhere, it has to be. might just be hard to find. :/

[CivicEGSI]

SuperDa9 is oil technician ;) Nah thanks for all the info dude, very helpful :) +1 so 10w30/40 would be good for say, a "95 b16a? and just say it was like "SZ" It would be ****ing ridiculously good?

[charliebrown]

Can't rep super-da9 since i did a while back wtf lol

I'm using castrol magnatec 10w-40.

I had a period when i drove my car hard for a while but my oil level has never dropped. Does that mean i should continue to use this oil grade?

[Super-DA9]

SuperDa9 is oil technician ;) Nah thanks for all the info dude, very helpful :) +1 so 10w30/40 would be good for say, a "95 b16a? and just say it was like "SZ" It would be ****ing ridiculously good?

haha all good man. :)

well if SZ did exist then yeah it would be fkn insane lol. but SN is as high as it goes.

as to whether 10W30/40 is good for b16a, it depends on the condition of your engine. how many kms? I have a B18C2 tuned w/cams with 146,000KM on it and I run nulon 15W50 synthetic as it doesn't seem to burn. my engine revs to 8300RPM, which is where my power max's so I needed a moderate thickness that doesn't thin out easy, because when you rev high the oil thins out under the heat.

[Super-DA9]

Can't rep super-da9 since i did a while back wtf lol

I'm using castrol magnatec 10w-40.

I had a period when i drove my car hard for a while but my oil level has never dropped. Does that mean i should continue to use this oil grade?

Magnatec is SM. thats a good grade.

yeah man if the oils stays the same then stick with it, or if you change oils just use the same viscosity and grade. ;)

[charliebrown]

Cheers mate. Learnt a lot of new things bout oil today :)

[CivicEGSI]

^Me too :)

Umm just bought an ek4 today hahaha, 190xxx kms ( Bit high, but VGC, and really well maintained by a mechanic)(soz about wrong forum ;)) and thinking about using 10w40 synthetic honda oils? What you reckon?

[charliebrown]

Going from what super-da9 said about high revving engines with high kms, that 10w-30 might burn especially when revving high so 10w-40 sounds good? Why synthetic? If you change your oil every 6 months do you really wanna spend that much? I buy castrol magnatec for $25 5L bottle

[Super-DA9]

^Me too :)

Umm just bought an ek4 today hahaha, 190xxx kms ( Bit high, but VGC, and really well maintained by a mechanic)(soz about wrong forum ;)) and thinking about using 10w40 synthetic honda oils? What you reckon?

Hmm well B16a revs to 8500RPM correct? even if it's in good nick, 10W is a bit thin for a car with over 100,000km IMO. I'd suggest probably use the same kind of stuff I'm using, a 15W50 as our engines are similar and both from the same year. but I guess when it comes to buying a car and doing the first oil change, you don't know what's gonna burn till you try it.

also do you mean Honda genuine synthetic? like FEO ultra? if so thats actually a 5W40, I tried it when I first got my car and it chewed through it every time I revved it up. It's REALLY thin stuff. :/

[Super-DA9]

Going from what super-da9 said about high revving engines with high kms, that 10w-30 might burn especially when revving high so 10w-40 sounds good? Why synthetic? If you change your oil every 6 months do you really wanna spend that much? I buy castrol magnatec for $25 5L bottle

all depends on the age and condition of the engine, normally in high RPM B series you'd wanna use 10W40 if it's below 100,000km and 15W40/15W50 if it's over 100,000km.

but this principle changes depending on the condition of the seals in the engine, for example if the engine was overhauled, meaning the piston rings, valve seals/guides were all replaced you could go back to using thinner oil again, even if it was burning it before. also if the car's been extremely well taken care of and the seals are 100% intact regardless of having high kms you could still use thinner 10W oils.

the best way to find out if your not sure how the inside of your engine is like, is to experiment with different oils, starting with something on the thin side like a 10W30/10W40. if it burns it, then go thicker! 15W40/15W50. if it burns it, go thicker again! 20W50. if it ONLY burns at the top RPMs then just advance the second number. 30 to 40, or 40 to 50.

the difference between minerals and synthetics is basically quality, performance (lubricating and cooling performance), cleanliness and price. that said there are some really good mineral oils too. mainly comes down to how much you wanna spend. you should also change your oil at the same time regardless of it's type.

magnatec is fine man, my car ran happily on it when I first got it. good for economy too. :)

[charliebrown]

How is the fuel economy on your dc2? Any noticable difference using different oils?

[Super-DA9]

How is the fuel economy on your dc2? Any noticable difference using different oils?

Well it was a little better on thinner ones i guess, but not very noticeable to be honest. I don't really monitor it as I don't drive it daily and it's tuned for performance. :/

[CivicEGSI]

Id like to use genuine Honda oil, just so i know what im putting in my car xD that and i don't know many other good oils :P

[Super-DA9]

Id like to use genuine Honda oil, just so i know what im putting in my car xD that and i don't know many other good oils :P

did you know that honda genuine oil is literally just caltex? it's even got the star on the cap and says caltex on the back. :P

you can get the same stuff under the calibre brand name at supercheap and it's got the same star and logo to prove it. ;)

it's not "bad oil". the synthetic honda FEO ultra is actually a very good grade (SM) but it's just really thin stuff.

[u mad?]

washed it
serviced it

how exciting!

[CivicEGSI]

did you know that honda genuine oil is literally just caltex? it's even got the star on the cap and says caltex on the back. :P

you can get the same stuff under the calibre brand name at supercheap and it's got the same star and logo to prove it. ;)

it's not "bad oil". the synthetic honda FEO ultra is actually a very good grade (SM) but it's just really thin stuff.

Fuuuuuu- xD So what do you use/recommend?

[DTN]

sewed up a rip in my carpet today cause previous owner was a douche and ripped it to run amp wires -___-

[Dubstein]

sewed up a rip in my carpet today cause previous owner was a douche and ripped it to run amp wires -___-

How dodgy!

[DTN]

How dodgy!

Haha i was gonna get new carpet but cant be bothered taking interior out lol

he didnt do a very good job with the headunit either, it fell out while i was driving back then

[Dubstein]

Bwahah, When i bought mine, he said he was taking all his audio out.. So i ended up getting cords everywhere in the boot, Only 2 speakers and a blown ass headunit that wasn't even wired up..

Today i looked in my car for my lost Harddrive.. -.- FML

[Super-DA9]

Fuuuuuu- xD So what do you use/recommend?

Yeah it sucks that they try to hide that ay? well if your a spirited driver, I would recommend a similar oil to what I use. Also our engines are very similar. 15W50 Nulon Fully synthetic, or the same oil in 10W40 if you think it doesn't need 15W.

[Lukey]

i use 10w40 RP in my dc4 w/ b18b2 on 297xxx kms

[cph3r]

Penrite Everyday Full Synthetic 10W-40 here for my DC4. B18B2 @ 122xxx km's

[CivicEGSI]

Cheers for the advice guys. Probs look at 15w50, just to guarantee that its thick enough, wouldn't want to use like, 10w30 and have it chew through it insta xD

[Super-DA9]

i use 10w40 RP in my dc4 w/ b18b2 on 297xxx kms

must be in really nice condition! good work for taking such good care of it. ever burn any oil outside of the normal rate?

[Lukey]

lol! you got no idea!

it blows a bit of blue smoke, it has leaky headgasket, sump gasket, cam seal gasket near the dizzy, i must top up 1-2lt every 5000kms

[Super-DA9]

lol! you got no idea!

it blows a bit of blue smoke, it has leaky headgasket, sump gasket, cam seal gasket near the dizzy, i must top up 1-2lt every 5000kms

Oh sh*t, lol. better get onto that fixin'! :P

[Dubstein]

Oh sh*t, lol. better get onto that fixin'! :P

Gratz on 300th post :)

[Super-DA9]

Gratz on 300th post :)

oh wow haha didn't even notice, cheers :)

[Lukey]

depends on cost of vrs kit or a lower km used engine

[Super-DA9]

B20! like a baawzzz :D

[Lukey]

depends on costs of everything

[charliebrown]

Hopped in my boot and jumped around trying to get springs to settle faster... one side is higher than the other wtf!

[act_gooner]

That is ghetto as.

[charliebrown]

Worked last time... :(

[CivicEGSI]

Hahahahahahahahahahaahah sooooo ****ing awesome

[Super-DA9]

Hopped in my boot and jumped around trying to get springs to settle faster... one side is higher than the other wtf!

is the drivers side lower?

happened with my coilovers at first, takes time to settle in properly. needs to drive around with passengers haha

[Dubstein]

Hahah, passengers? Chuck some bricks in that shit.

http://s3.amazonaws.com/kym-assets/entries/icons/original/000/003/619/Untitled-1.jpg?1288903617

[cph3r]

What springs did you get charlie? Saving my dosh for some next week *fingers crossed*

[charliebrown]

at the moment im on front oem with king lows. Rear pedders comfort gas shocks with king superlows. Ride is shit lol, heaps of bodyroll, train tracks are my worst enemy. I already had the front in for a few months, just changed rear 2 weeks ago. The right side about a finger lower than left side for some odd reason

[CivicEGSI]

Feels bad man :/

[act_gooner]

Not really doing anything to my Integra, but am in pursuit of purchasing one for my gf.
A 1995 vti-r shouldn't redline until just over 8,000 revs right? Also, the speedometer should go to around 230? I'm asking because I'm looking at buying one for my gf but I have no clue wtf cluster the seller has installed because it redlines to like 6,900 (gsi) but the speedometer ends at like 190 kms.

[CivicEGSI]

Imports top at 180 ;)

[Hongtegra]

Not really doing anything to my Integra, but am in pursuit of purchasing one for my gf.
A 1995 vti-r shouldn't redline until just over 8,000 revs right? Also, the speedometer should go to around 230? I'm asking because I'm looking at buying one for my gf but I have no clue wtf cluster the seller has installed because it redlines to like 6,900 (gsi) but the speedometer ends at like 190 kms.

Yup, my redline starts at 8,000rpm and the speedometer reaches to 220km/h.

[act_gooner]

So what cluster has it got? I'm confused. Would it be dodgy to buy a car with a different cluster?

[Lukey]

What springs did you get charlie? Saving my dosh for some next week *fingers crossed*

i got king spring ultra lows if ur interested

[charliebrown]

Yeah the GSi cluster redlines at 6900 and speedo ends at 230. VTi-R cluster redlines at 8000, speedo same as gsi. Maybe it's an LS cluster, or perhaps off a JDM integra of some sort? Does it look like this

http://www.jdmshit.com/UsedParts/JDM_LS_Cluster.jpg

From a JDM DB8. Was the kms he listed on carsales the same as the cluster?

[act_gooner]

Yeah it looks exactly like that. Kms on the cluster say 106,000 but the ad says 110,000 so yeah pretty much. I've asked for the number of their mechanic, should probs do a rev check too.

[Dubstein]

Drove my insane family to diner and back ... -.-

[CivicEGSI]

Drove my insane family to diner and back ... -.-

Huehuehueuhue. umad ;) I have to work 7:30 - 5:30 tomorrow.... Keen....
...

[owens14]

Installed injen cold air intake on my type s and loving the sound :)

[charliebrown]

Not sure if i should go lower... got about 11-12cm clearance at the lip, tight 2 finger gaps (my fingers, they small fingers lol). Looks way too high! Wondering what you guys got on your dc.

Slam rear? yes?

http://www.vlturbo.com/images/gallery/775-rear-end-slammed-in-the-purple-commodore.jpg

[tripleuse]

i have just a 2 finger gap, i dont see a point in going under it.

[charliebrown]

Only problem i'm getting is the front mudflaps don't clear speedhumps... the small tall ones hook my mudflap and make badass sound. Lip scraping is also raping my front bumper, makes a shitload of ugly white vertical lines!

[tripleuse]

mines a 120 mm at lip and is fine, ditch the mudflaps :)

[charliebrown]

I paid $120 for the mudflaps lol i wanna keep em! Completes the look imo

By the way guys, what you reckon, rear visor AND dc2r wing? or rear visor and wingless. also rear wiper delete or nah? sometimes i kinda need it lol but it takes away from the clean rear end look :(

[Lukey]

negative rake is a big no-no!

front mudflaps are only rubber(?) dont worry bout them.

i scrape zorst, fsb, sump, gbox, front bumper, chassis rails

[charliebrown]

Not worried bout the flaps, but what they are attached to! If it was the rear mudflaps, they'd rip off the whole rear bar or some shit. Fronts would only tear off the sideskirts at worst.

I know neg rake is shit for accelerating and handling etc, but then why do all the commodores go for it? A bit of a generalisation, but they are the ones who drag mainly with their straight line power

[DTN]

I paid $120 for the mudflaps lol i wanna keep em! Completes the look imo

By the way guys, what you reckon, rear visor AND dc2r wing? or rear visor and wingless. also rear wiper delete or nah? sometimes i kinda need it lol but it takes away from the clean rear end look :(

Nah go wingless and visors, it'll look heaps better when you dump it on some nice wheels later. In the same situation as you about the rear wiper but i think im gonna keep it on cause i dont really like the rubber dot after its been taken out lol

[Lukey]

scraping the front mudflaps wont pull off the sideskirts or rear mudflaps the rear bumper.

youre to paranoid dude.

[Super-DA9]

I know neg rake is shit for accelerating and handling etc, but then why do all the commodores go for it? A bit of a generalisation, but they are the ones who drag mainly with their straight line power

ok, do you think someone whos car looks like this knows anything about performance? lol


http://www.vlturbo.com/images/gallery/775-rear-end-slammed-in-the-purple-commodore.jpg

[cph3r]

Man, that commodore is hilarious!
Done nothing to the teg this weekend, too seedy :-P
Teaching my bro to drive, been slack and havent taken him in a month.

[charliebrown]

I have no more time to work on my car even if i had things to do :(

Been driving sedately on my current tank, hopefully i can break 10L/100km for the first time and see a 4xx number on the trip :D

[45SET]

Went out after work on Friday night, got home at 2:30am... ish, then had to get up at 7 to get ready to go get a wheel alignment.

They were also meant to fit some adjustable length tie rods, but it was to much of a pain in the ass, so I sat there from 8-12 for them to only do a wheel alignment, and raise it a tad... but I'm not fussed. Said it would be A LOT easier to install the rods if the engine wasn't in the way...

I'm still getting some slight tyre rub on the guard lining tabs, but I'll cut these out.

Pic of now Teg now... I'll get better pics later... I still need to put the front guard lining back in.

http://i4.photobucket.com/albums/y123/45SET/Integra/175773_10150330027331346_731506345_9883578_212468_ o.jpg

[Lukey]

looks good man

[cph3r]

Certainly does

[Dubstein]

Thats so fly!

[CivicEGSI]

Ma'farkin balla'!!

[45SET]

Thanks guys. I'll try to get some decent pics this weekend.

That pic doesn't show the alignment settings very well. Front has -2' and rear has -3', the rear has about a pinky between tyre and guard (If that).

I'm running 17x9+22 TE37's all round with 225/45's Dunlop Z1 Starspecs.

[Preludes <3]

Nice work Yoshi, I have no idea why ive not yet seen this machine in person. D:
Keep it up ^^ :thumbsup::thumbsup:

[Dubstein]

New kicks and clean car. :P And you'll see it soon!

http://i1110.photobucket.com/albums/h460/Yoshi_Castellana/IMG_2484.jpg

[charliebrown]

Fahhh big shoes = big ____

[Dubstein]

price tag? ;)

[Lukey]

took my axleback off cos i was bored.

need to go see a zorst shop since it sits on my lca and is wearing a groove into it

[charliebrown]

Raise the car a bit brah?

[Lukey]

**** that

[Indie]

Went out after work on Friday night, got home at 2:30am... ish, then had to get up at 7 to get ready to go get a wheel alignment.

They were also meant to fit some adjustable length tie rods, but it was to much of a pain in the ass, so I sat there from 8-12 for them to only do a wheel alignment, and raise it a tad... but I'm not fussed. Said it would be A LOT easier to install the rods if the engine wasn't in the way...

I'm still getting some slight tyre rub on the guard lining tabs, but I'll cut these out.

Pic of now Teg now... I'll get better pics later... I still need to put the front guard lining back in.

http://i4.photobucket.com/albums/y123/45SET/Integra/175773_10150330027331346_731506345_9883578_212468_ o.jpg Looks great, bruv. Reminds me of mine, with the clean, spoilerless silver look, and black wheels. Reminds me that I want my black side-skirts sprayed or shaved... Anyway, shave that rear wiper! :D

[DOMN8U]

installed foggies with HID today :)

[charliebrown]

Installed sub/amp/box and got tyres fitted onto the wheels been sitting in my room for months

[CivicEGSI]

Pics?

[45SET]

Looks great, bruv. Reminds me of mine, with the clean, spoilerless silver look, and black wheels. Reminds me that I want my black side-skirts sprayed or shaved... Anyway, shave that rear wiper! :D

Thanks man... the rims are actually Mag Blue... not that you can tell in that pic

But I promised some more pics... and I deliver

http://i4.photobucket.com/albums/y123/45SET/Integra/287855_10150336094261346_731506345_9960776_952738_ o.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/286114_10150336094396346_731506345_9960778_6746264 _o.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/286971_10150336094526346_731506345_9960781_7980490 _o.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/286903_10150336094956346_731506345_9960787_7741891 _o.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/287093_10150336094711346_731506345_9960785_1454920 _o.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/287321_10150336095226346_731506345_9960792_2942802 _o.jpg

I realised I didn't have any crap pictures of my car with a crap camera (It seems to be the done thing), so I thought I would take some tonight...

:p

But on a serious note, someone on another forum wanted to know what the fitment was like.

[SuperJDM.]

nice nice nice! ^

[Lukey]

front looks like it needs to come down a smidge

[45SET]

front looks like it needs to come down a smidge

Sigh... don't say that... I just bought new coilovers (Ohlins DFV's) because the last ones (Tein SS) didn't sit low enough!

It did sit a little lower before the alignment, and it scrubbed on to many parts of the chassis... as I haven't put the lining back in yet!

[Lukey]

:zip:

[Dubstein]

http://i4.photobucket.com/albums/y123/45SET/Integra/287093_10150336094711346_731506345_9960785_1454920 _o.jpg

Loving it!

Drove 2hrs to get ice cream today D:

[Greeny]

washed and took some photos, forgot how good it looked clean.
http://i183.photobucket.com/albums/x11/greenycq20/DC5R/1312691112458.jpg

[Dubstein]

^^ Looking nice, hows the weather in Tasmania?

[Greeny]

^^ Looking nice, hows the weather in Tasmania?

Thanks, lol pretty much like the pic hasnt stoped raining today

[Dubstein]

Feelsbad, Owell roads would be nice and slippery *Haaaaanndbraaakkkkee*

[CivicEGSI]

Rofl, atherton is soooo much rain. Makes me fury.

[charliebrown]

Got a wheel alignment. Steering wheel is ridiculously loose now. Called them up afterwards but they said it's fine... i'm worried they forgot to tighten something and one day my steering wheel gonna come off :S

[Super-DA9]

got my 5zigen FN01R-C's and innovative 60a's today. will post pics of car when the wheels are on. gotta decide on tyres, looking for a nice grippy tyre in 205/45R16 or 215/45R16 (not sure yet) thats affordable (not looking to spend $200 a tyre lol, any suggestions?

[charliebrown]

you wanna go cheap like i did? sailun atrezzo zs+ 205/45/16 $100 fitted and balanced. no complaints... but i had cheap tyres before (sport comfort or some shit)

[Super-DA9]

nah not cheap, my last tyres were federal 595SS which were a nice balance of a softer compound then cheap tyres and good affordability, but I wanna step up on these ones. maybe 595RSR's?

[r3ckless]

Robi.. Drive down to sydney for the citr bbq and come topone.. Tie rods install will be done ;). Thanks again for the pics!

[rhys.l]

Yesterday - northern NSW drive with some companions

19530

After driving mate's cayman S, am happy to report there are some things my honda does better (imo) - brakes, gearbox and funnily enough engine noise :)

[Dubstein]

^ Hahaha, Nice lil crew :P


Decided i want to stickerbomb leftside mirror

[SuperJDM.]

Yesterday - northern NSW drive with some companions

19530

After driving mate's cayman S, am happy to report there are some things my honda does better (imo) - brakes, gearbox and funnily enough engine noise :)

curious to know what he would say about your DC2R

[rhys.l]

He liked the sound and the brakes, but wasn't impressed by the steering. I tend to agree with him - it could definitely be quicker. Other than a cai, my car is stock.

[45SET]

I had my younger brother take some decent shots of the car...

http://i4.photobucket.com/albums/y123/45SET/Integra/286232_2111687745472_1043980241_2383005_2535931_o. jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/288764_2111687185458_1043980241_2383004_541117_o.j pg

[SuperJDM.]

oh dear lord

[45SET]

oh dear lord

I know... it's shit... but it gets me from A-to-B

lulz...

MOAR??

[SuperJDM.]

get a real car...

lulz...

get more pics up please

[Lukey]

so much ground clearance?

:confused:

[45SET]

As requested...

http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6345.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6395.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6445.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6408.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6410.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6437.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6466.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6472.jpg
http://i4.photobucket.com/albums/y123/45SET/Integra/IMG_6478.jpg

Now that I'm fairly happy with the exterior... I can probably move onto engine and brakes...


so much ground clearance?

:confused:

Shut up you...

[SuperJDM.]

why so sexyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

[45SET]

why so sexyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

copying owner...

[SuperJDM.]

how much camber you running in the back?

[45SET]

how much camber you running in the back?

-2 front
-3 rear

Once I take the engine out, I'll be replacing the tie rods with adjustable length items (Bitch to get to with the engine in), so I'll be able to dial in more camber up front.

[Dubstein]

Mate just got his Civic, so came up to mine and had a little shoot.

http://i1110.photobucket.com/albums/h460/Yoshi_Castellana/IMG_2909.jpg

http://i1110.photobucket.com/albums/h460/Yoshi_Castellana/IMG_2900.jpg

http://i1110.photobucket.com/albums/h460/Yoshi_Castellana/IMG_2915.jpg

Got nothing on 45SET hahah.

[CivicEGSI]

Except for +45 offset ;)

[Timmy_B]

Nothing Big... Just had my lip kit sprayed.
http://i613.photobucket.com/albums/tt217/DC-05-NA/DSC_0141-1.jpg

[CivicEGSI]

:O Beautiful :thumbsup:

[Indie]

Nice car.

I like dark metallic red.

[89lude]

finally swapped the front.
http://i1110.photobucket.com/albums/h445/an-tho-mi/IMG_1378.jpg
http://i1110.photobucket.com/albums/h445/an-tho-mi/IMG_1377.jpg

[CivicEGSI]

Ballin JDM front xD What colour is final paint colour going to be?

[Indie]

Good job mate! I'll always stay true to the four-eyes, but yours is looking nice already!

Well, it's a few days until I get my licence back, so I got mine a new battery, put some air in the tyres, checked the oil, and plugged the holes left by my wiper/spoiler delete with grommets. It's meant to be sunny tomorrow, so I might get out there and clean off the thick layer of dust that has accumulated over the last six months. Just need some touch-up paint to turn the black grommets silver.

When I turned that key and heard her running smoothly, I felt so happy. Like new, ready to get back on the road.

[89lude]

Ballin JDM front xD What colour is final paint colour going to be?

its staying black but im getting rid of the metallic stuff. its going to be jet black.

[CivicEGSI]

Faark yeah, gonna look sick (Y)

[blastnpast]

Nothing Big... Just had my lip kit sprayed.
http://i613.photobucket.com/albums/tt217/DC-05-NA/DSC_0141-1.jpg

Sexc as timmy

[Timmy_B]

Sexc as timmy

Yeah, looks alot better now :)

[Dubstein]

Almost 400 replies, person who gets it gets a cookie.

[Indie]

So here's my layer of dust:

http://i230.photobucket.com/albums/ee95/Blue_Aus/IMG_1220.jpg

A bit of a look at the spoiler/wiper delete:

http://i230.photobucket.com/albums/ee95/Blue_Aus/IMG_1230.jpg

And the whole thing cleaned, and in need of a spray on the front bar:

http://i230.photobucket.com/albums/ee95/Blue_Aus/IMG_1225.jpg

What a beautiful day for a wash.

[Dubstein]

Dam nice! First time i've seen pictures of your car mate.

What camera are you using?

[Super-DA9]

I get

[Super-DA9]

cookies now. thanks dubstein :)

[Indie]

That's cheating! :P

Cheers Dub! I shoot with a gripped Canon 5D, 28-70mm L Series lens, and a 580EXII SpeedLite.

[charliebrown]

A lip will cover 80% of the imperfections on that front bar

[Dubstein]

cookies now. thanks dubstein :)

Hahah here then

http://upload.wikimedia.org/wikipedia/commons/9/9a/Choco_chip_cookie.jpg

[Lukey]

youd hate to see my front bar

:rofl

[Indie]

I'm playing a game of Words With Friends (iPhone Scrabble) with my gf, and the letters I started with were R E S P R A Y. 56 points!

Hm, a front lip would definitely help.

[CivicEGSI]

I shoot with a gripped Canon 5D, 28-70mm L Series lens, and a 580EXII SpeedLite.

What the price on the canon 5d.. would you recommend?

[Dubstein]

^ Still recommend the Nikon brah.

[Indie]

What the price on the canon 5d.. would you recommend?You can get a second-hand Canon 5D in good condition for $1500 or less. I'm not a Nikon hater, but I much prefer Canon personally, and I wholeheartedly recommend the 5D. I love using it.

[Dubstein]

Was thar your first owned dslr?

[Indie]

Was thar your first owned dslr?Nah, I started off with a 400D and an f/1.8 50mm, which was a great camera to learn on.

[CivicEGSI]

Me and Dubstein are going halves in a D3100 to learn on :D udig??

[williamwong]

replaced one of the bulbs in the climate control knob. worked for 1 minute, then the bulb next to it blew. need to order another from honda. fml

[Lukey]

put my muffler back on

[cph3r]

put my muffler back on

Boooo

[Lukey]

haha.

[SuperJDM.]

Me and Dubstein are going halves in a D3100 to learn on :D udig??

rofl was about to get that for my first DSLR but it looks ugly so i got a 550D instead :)

canon FTW! no halves situation here, udig?

[Indie]

rofl was about to get that for my first DSLR but it looks ugly so i got a 550D instead :)

canon FTW! no halves situation here, udig?Ha, the looks aren't important, but the fact that the 550D is made in Japan, while the D3100 is made in Thailand, is a major deciding factor for me. We're on a Honda forum, so we should all agree that there's no point buying from Thailand when you can get Japanese build quality!

Not that the D3100 will necessarily be poorly made, as it's still a Nikon, but, you know... It's not a Japanese-built Canon.

[CivicEGSI]

rofl was about to get that for my first DSLR but it looks ugly so i got a 550D instead :)

canon FTW! no halves situation here, udig?

Hahahhaa balla kient!!!

[Lukey]

washed it

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/309147_10150750600970696_894625695_20280369_372488 8_n.jpg

[cph3r]

Rotated tyres. Now I have nothing to do -.-

[notorious_ahmie]

sprayed my rims

http://img192.imageshack.us/img192/2391/6331.jpg (http://imageshack.us/photo/my-images/192/6331.jpg/)

[Dubstein]

Ballin, is that at a 7/11?

[rhys.l]

Enkei tarmacs fitted. Now to find some tyres in the correct profile. Thinking federal 595rsr..


http://i85.photobucket.com/albums/k53/rocky_mtn50/typer_enkei.jpg

[act_gooner]

Washed it yesterday, turned out pretty shitty though. Think from now on I will just do it at home.

[Super-DA9]

Enkei tarmacs fitted. Now to find some tyres in the correct profile. Thinking federal 595rsr..


http://i85.photobucket.com/albums/k53/rocky_mtn50/typer_enkei.jpg

faark that looks good. I just got federal RS-R's and they grip and turn in like crazy! maybe not the best if you daily drive your teg because street semi's have a pretty gnarly treadwear rate. still a better rate and grip then KU36's I've heard.

[notorious_ahmie]

haha yehh it is dub..like the rims? im gettin flamed for em on clubitr lol

[TeggDC2]

Getting a 2.25inch canon sports exhaust, need some sort of sound and power :D

[Dubstein]

haha yehh it is dub..like the rims? im gettin flamed for em on clubitr lol
Rims look pretty good! What colour were they before and did you do the red strips Aswell?


Getting a 2.25inch canon sports exhaust, need some sort of sound and power :D
Eww cannons (n)

[Super-DA9]

Finally got around to getting some pics. Didn't do this today but recently lol.

FN01R-C 16x7 - Federal RS-R - Re-Painted Valve Cover.

1966919668196661966719670

[Super-DA9]

Eww cannons (n)

+1 should go a twinloop or something, the droney sound of the cannon will really get on your nerves after about 2 weeks :(

[notorious_ahmie]

Rims look pretty good! What colour were they before and did you do the red strips Aswell?

standard gun metal..and sprayed the lip as well..:) i think i did ok by my standards

[CivicEGSI]

Had a mate who thought it would be sick if he got a cannon on his lancer. I hate his car now :/ Lesson learnt about cannons (Y)

[rhys.l]

faark that looks good. I just got federal RS-R's and they grip and turn in like crazy! maybe not the best if you daily drive your teg because street semi's have a pretty gnarly treadwear rate. still a better rate and grip then KU36's I've heard.

Cheers for the info. The ku36 should last longer (180 wear rating vs. 140 for the 595rsr) but they don't come in 205/45/16.

I like what you are running on your car at the moment. What are your wheel and tyre specs? I've got 16x7 +32 wheels and I'm hoping to get away with not rolling the rears by using 205/45 tyres..

[Super-DA9]

ahh ok, I was told that it was the other way round. guess you can't believe everything you hear huh? :S

anyway the specs on the wheels are 16x7 +33 6.9kg each. tyres are 205/45R16.

these wheels work perfectly for the way my car sits, just a nice offset and no guard rolling required! :)

[rhys.l]

Cool well technically when I get my tyres the wheels should sit essentially the same as yours with no rolling required :). I think mine are poking more atm because of the big tyres I am currently running and the height the car is at. However, soon to be fixed!

[Super-DA9]

Cool well technically when I get my tyres the wheels should sit essentially the same as yours with no rolling required :). I think mine are poking more atm because of the big tyres I am currently running and the height the car is at. However, soon to be fixed!

yeah it looks like your tyres over hang the wheels lip a bit, my old 17's had that and they rubbed the guards whenever I hit a reasonable bump, but now nothing at all :)

if you're basically going with the same wheel/tyre setup as me (only slightly different offset) I'm sure you'll be more then happy with it :)

[TeggDC2]

Had a mate who thought it would be sick if he got a cannon on his lancer. I hate his car now :/ Lesson learnt about cannons (Y)

Does he hate it

[Peachy]

In the last few days:
- Bought the darn thing
- New RE002's on the front, will replace back once they're word
- Bought some car washing products and gave the car a wash, claybar and polish
What's happening now:
- New control arm bushings
- New front disk pads

http://img812.imageshack.us/img812/3839/photoufh.jpg (http://imageshack.us/photo/my-images/812/photoufh.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Indie]

All of your wheels look sick, guys. Good spray job on the black and red, looks great. And your black DC5 looks mean, Peach!

[notorious_ahmie]

cheers indie

[Peachy]

your black DC5 looks mean, Peach!

Thanks chief :) although the only thing thats mean about it is the abuse it gives my wallet

And I don't care what other people think but the wheels are going black when I get some time :)

[Peachy]

double post

[CivicEGSI]

Does he hate it

Most definately xD He also got the cat removed for extra loud. smart huh? ;)

[Dubstein]

Got some grommets off ^

http://i.imgur.com/E96LY.jpg

Anyone wana buy a Spoiler ? ;)

[charliebrown]

Keep the spoiler just incase you wanna sell the car, no one's gonna buy that shit anyway, not even for $5. You planning to go lower man? Wingless doesn't work that well with stock height imo

[Dubstein]

Yeah i'll see what happens with the wing, going to have the car for quite a long time. And yeah planning on getting some king/eibach springs soon. Im not happy at all with the height that its at now.. lol

[Dubstein]

Not going to get these http://www.ebay.com.au/itm/94-01-Integra-Lowering-Coilover-Coil-Springs-Adjustable-/320748882644?pt=Motors_Car_Truck_Parts_Accessories&hash=item4aae1f8ad4

But what do you think? xD

Looking at these 2.5" Drop http://www.ebay.com.au/itm/SKUNK2-Civic-Del-Sol-Integra-Lowering-Springs-EG-EK-DC2-/350369885541?pt=Motors_Car_Truck_Parts_Accessories&hash=item5193ac2d65#ht_2630wt_1143

[charliebrown]

My take on the whole lowering thing is first lower just a tad, maybe 1.5" and learn to drive around like that, angling driveways, learning where you can go and where you can't. Then after that, go whatever height you want cos you'll be able to judge. But don't go really low off the bat, you gonna fkn rip off your front bar or some shit.

I'm on king springs but i've never used other springs so i can't really provide a comparison. My opinion is that it looks better, good price (esp. second hand) but they are just way too soft, a lot of suspension travel so your wheel moves up and down a lot, depending on width and offset it'll scrub on your guards. Train tracks are really these springs worst enemy. Speed humps are ok if you slow down enough but my breakfast comes up every morning when i go over the rails and my P plate falls off the dash lol

[charliebrown]

2.5" front will be ok if you don't have a lip (i've got slightly under 2" with a mugen lip and i can get around) but when turning it might rub depending on your wheels. 2.25" rear is about what i've got, doesn't tuck, you need about 3" for a good tuck

[Lukey]

my opinion after wasting money on 2 sets of lowering springs in to get coilovers.

then slam it

[Super-DA9]

BC's BR series coilovers are great quality and nice and cheap.

don't get lowering springs past an inch and a bit without lowered shocks if you care about handling haha.

[Lukey]

BC's BR series coilovers are great quality and nice and cheap.

i also have these and recommend them!

[charliebrown]

my opinion after wasting money on 2 sets of lowering springs in to get coilovers.

then slam it

It doesn't cost anything man, you buy second hand springs, sell em for the same price. Only thing is you gotta put the springs in, takes like 2-3 hours of your time. Same with adjusting coilovers, except apparently they aren't comfy for a daily if you don't wanna get all butthurt

[Dubstein]

Aight Im just concerned about lowering because wear I live there are alot of horrible roads, not to mention my shithole of a driveway.. I'll show you a picture of my boss trying to get up it with 2.5' lowered kings.. Funny as.

Anyway thanks for all the useful information everyone.

[charliebrown]

Practical + looks = 1 finger gap + lip

[Lukey]

lip = unpractical

[Indie]

lip = unpracticalThis.

[Dubstein]

This.

That ^

[Dubstein]

Here the picture of boss's lancer with kings

http://i.imgur.com/At9iQ.jpg

Couldnt go any further at all

[charliebrown]

A little vom in mouth... that is disgusting. Disgusting body kit, disgusting wheels, oh and it's a lancer!

[Lukey]

proper pic of ur driveway?

[Dubstein]

proper pic of ur driveway?

Tommrow ill get you one.


A little vom in mouth... that is disgusting. Disgusting body kit, disgusting wheels, oh and it's a lancer!
you forgot about the clear taillights LOL

Yeah i know, he knows, you know. Actually this was his first ever car, and he regrets doing stuff to it, had it for over 7 years i believe.. Just to lazy to sell it or get new stuff for it, Don't bag him out to much haha. He doesn't hoon around town and take pride in his ride like most of those rice lancers.

And the rims are not that bad, weights in at around 6kg.

[Super-DA9]

This probably belongs in the noob thread, but if I put chrome tail lights on my car will it handle better?

[Lukey]

fo sho it willz brahseph

[charliebrown]

Why so many people got stupid ass chrome tail lights? They aren't even cheap... must be cos they got them plastered all over the walls at supercheap and autobarn eh

[Indie]

The wheels are too small, and the car is too low. Terrible combination.

[khoannaDA9]

got some H4H HIDS on my da9 today, ignore my parkers, will get leds soon and got my accord lip on the other day. will be getting accord side skirts on soon also ;D
http://img849.imageshack.us/img849/1161/sdfsfsfsd.jpg (http://imageshack.us/photo/my-images/849/sdfsfsfsd.jpg/)

[CivicEGSI]

This is Dubstein's Driveway

http://i1085.photobucket.com/albums/j433/Tim_Charlesworth/IMG_33361.jpg

The photo doesn't do it justice, it's actually alot steeper than it looks :thumbdwn:

[Lukey]

angle more.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/262201_10150690227905696_894625695_19510108_570215 7_n.jpg

[CivicEGSI]

Took the driveway on about that angle today.... Ripped my front lip off :thumbsup:

[Super-DA9]

got some H4H HIDS on my da9 today, ignore my parkers, will get leds soon and got my accord lip on the other day. will be getting accord side skirts on soon also ;D
http://img849.imageshack.us/img849/1161/sdfsfsfsd.jpg (http://imageshack.us/photo/my-images/849/sdfsfsfsd.jpg/)

looks good man, just make sure to aim them right ;)

I kinda miss my DA, was great fun to drive. wasn't as fast as the DC2 but it was like driving a go kart it was so well planted to the ground :)

[rhys.l]

yeah it looks like your tyres over hang the wheels lip a bit, my old 17's had that and they rubbed the guards whenever I hit a reasonable bump, but now nothing at all :)

if you're basically going with the same wheel/tyre setup as me (only slightly different offset) I'm sure you'll be more then happy with it :)

I'm scrubbing :( Must be that extra 1mm offset lol

[charliebrown]

How can you tell if you're scrubbing? I honestly wouldn't be able to tell even if i had my music off

[Super-DA9]

I'm scrubbing :( Must be that extra 1mm offset lol

with current tyres or new ones?

[Lukey]

Took the driveway on about that angle today.... Ripped my front lip off :thumbsup:

now ur car is more practical

[rhys.l]

How can you tell if you're scrubbing? I honestly wouldn't be able to tell even if i had my music off

It's normally pretty obvious! Mine is an annoying squeak and it occurs everytime I hit a corner hard


with current tyres or new ones?

New ones, federal rsrs same as yours..it must be close so maybe if I remove that black strip of plastic I may have some joy.

[khoannaDA9]

looks good man, just make sure to aim them right ;)

I kinda miss my DA, was great fun to drive. wasn't as fast as the DC2 but it was like driving a go kart it was so well planted to the ground :)

haha yyeah i tried to aim it, i think its okay. Haven't had any complaints from other drivers. my da9 was my first car and i love it to bits ! yeah u can say that, fast enough to get me places (: just need to get my 2.25inch exhaust on and save up for suspension and it should be all good ;D

[charliebrown]

I get squeaks sometimes ever since i dropped my rear further but i thought might be the shocks making the sound. Happens when i corner fast, speed bumps and angling driveways? No marks on the tyres so i dunno if the shocks are blown/blowing or if tyre rubs

[CivicEGSI]

now ur car is more practical

Nah, mounted it back on.... Just.

[Super-DA9]

It's normally pretty obvious! Mine is an annoying squeak and it occurs everytime I hit a corner hard



New ones, federal rsrs same as yours..it must be close so maybe if I remove that black strip of plastic I may have some joy.

oh ok, understood. interesting, what kind of suspension do you have? i'm sure if I'm turning hard enough with enough G's to roll the body a bit it might hit the guard a little, but my cars barely rolls around corners :S

[rhys.l]

Stock type r with spoon springs. So yeah it does actually move :P I've taken the black strips out and there is still a problem so I'm just going to get them rolled. Shame but I'm over it :thumbsup:

[Super-DA9]

Stock type r with spoon springs. So yeah it does actually move :P I've taken the black strips out and there is still a problem so I'm just going to get them rolled. Shame but I'm over it :thumbsup:

fuaark sorry dude that sucks :( I should've mentioned my setup includes coilovers on a stiff setting.

I think I'm still eventually gonna roll mine as well anyway, just to be safe. I'm gonna see If I can get a guard rolling tool and DIY.

[rhys.l]

All good man. It is pretty cheap to get done professionally but at the same time it looks very easy so DIY might be the way to go

[anzai]

Stock type r with spoon springs. So yeah it does actually move :P I've taken the black strips out and there is still a problem so I'm just going to get them rolled. Shame but I'm over it :thumbsup:

do u want the RHS black strip? otherwise ill take it

[rhys.l]

I've got one (both sides are the same). Pm if keen

[anzai]

are you in melb by any chance?

[Super-DA9]

fuuuuarken spring! I spend hours cleaning my DC2, throw a car cover over it, then take it off for a few hours the next day and the car is ridden with pollen dust! nooo!!!

anyone else's integras being attacked by pollen/spring-type-dust? haha

[Vvvtec]

Haha damn! I spent 3 hours claybarring mine yesterday... zomg so much win :D

[CivicEGSI]

^ I jelly :(

[act_gooner]

fuuuuarken spring! I spend hours cleaning my DC2, throw a car cover over it, then take it off for a few hours the next day and the car is ridden with pollen dust! nooo!!!

anyone else's integras being attacked by pollen/spring-type-dust? haha

I thought this was a problem I only experienced. Washed my car last friday, looked beautiful. Stepped outside a couple of hours later and its already covered in dust. I'm still sick so washing the car isn't really a priority atm and it seriously looks like its been rolled through a sand pit, even though I washed it twice last week. Every other car I see driving around looks clean :(

[notorious_ahmie]

fuuuuarken spring! I spend hours cleaning my DC2, throw a car cover over it, then take it off for a few hours the next day and the car is ridden with pollen dust! nooo!!!

anyone else's integras being attacked by pollen/spring-type-dust? haha

omg yes..i thought it was just me.!

[Super-DA9]

haha rolled in a sandpit describes it perfectly. it's annoying as fk!

[act_gooner]

Even more annoying is the fact that my car had a soccer ball booted into it the other night. By the time I finish uni on a wednesday night there are people doing soccer training on the ovals next to the car park that most people use. They must be ****ing shit players because I was driving out of the uni, was no where near the goals but a ball smashed into the side of my car.. It scared the shit out of me. Now I have noticed the ball has marked my paint :(. One my tonsilitis ****s off I'll give it a thorough wash but I reckon the marks will still be there. I'm considering taking it up with the university.

[Super-DA9]

Bring it over when you're feeling better and I'll see if I can buff the marks out for you.

But seriously, what a pile of shit heads, they were probably doing it on purpose. I would have run out there and made the guy who kicked the ball eat it.

[act_gooner]

Thanks man. Yeah I'm not sure if they were or not. Heaps of kids training, they're probably just really bad footballers. Most kids are pretty retarded. I have helped training a team of under 14's and they were a joke.. Kids these days....

[notorious_ahmie]

lol give em a nintendo wii controler and watch em put messi on show haha

[act_gooner]

They probably don't know who Messi is because he's not on COD or Futurama.

[charliebrown]

Bro you shoulda got out of the car as soon as the ball hit your car and said "who the fcuk did that". All the ****s woulda shat themself and even if no one owned up, they wouldn't do it again.

[CivicEGSI]

^ amen. Kick the shit out of them :P

[Lukey]

did you at least take their faggot ball?