***Official What did you do to your Integra today***

[VTC187]

i miss this car ^^^^

[Super-DA9]

wait, why is the bride seat in the passenger side and the stock seat on the drivers???

[eLtrix]

^ THIS. Haha, today put on spoon gear knob and mirrors :D

[tripleuse]

^ THIS. Haha, today put on spoon gear knob and mirrors :D

daily driven **** sitting in a fixed back everyday.

[nate92]

lol i lost my license so my gf drives it and she doesnt like the fixed so she gets stock untill i drive it again :)

[na-118]

bride in passenger seat? weak ****

[nate92]

gay kunt ^

[na-118]

what mods are nexT?

[nate92]

depends what mods you in the mood to install LOL

[Vvvtec]

Still going b20?

[na-118]

lol weakest link, i'm going to let out nate92s secret, it's currenty awaiting a gt35 :P sorry i had to,

[Vvvtec]

Oh there you go then lmao

[nate92]

lol... ruined everything!

[Evok]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/664832_440621105987505_499114318_o.jpg


Smashing prefacelift cause poor.

[Goku]

CAI or SRI? i cant decide.

[Mikecivic78]

CAI or SRI? i cant decide.

summer is coming, so CAI.

[--drew--]

Installed a new filter. Old one was dirty as hell. 3A Racing FTW lol.

[p3akin]

took my endless bbk and f7 lca off

[dc2screama]

Washed and serviced, fresh!

[Goku]

summer is coming, so CAI.

os there a specific brand that i should get? my mate has a weaporn-r CAI on his ej8 and he said its good. not too sure. any suggestions?

[Super-DA9]

os there a specific brand that i should get? my mate has a weaporn-r CAI on his ej8 and he said its good. not too sure. any suggestions?

Injen, or Fujita if you wanna save cash.

[bronson11]

os there a specific brand that i should get? my mate has a weaporn-r CAI on his ej8 and he said its good. not too sure. any suggestions?

+1 to injen

[Vvvtec]

http://sphotos-d.ak.fbcdn.net/hphotos-ak-ash3/546959_10151345619095011_603068063_n.jpg

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash3/59619_10151345619290011_225698277_n.jpg

http://sphotos-g.ak.fbcdn.net/hphotos-ak-snc6/602580_10151345619380011_361842308_n.jpg

[cbauto]

nice.

[Vvvtec]

thanks baz

[Dubstein]

nice.

[cbauto]

nice.

[PHO]

nice.

[Frosty-Civic]

Nice.

[bronson11]

Nice.

[mocchi]

Nice.

[Vvvtec]

Nice.

[nate92]

Nice.

[Super-DA9]

nice.

[Dubstein]

http://images.wikia.com/dragonage/images/2/2a/Anchorman-well-that-escalated-quickly.jpg

[mattsrea]

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/664832_440621105987505_499114318_o.jpg


Smashing prefacelift cause poor.

Nice DC2 dude! Whats the specs of 92s? And any guard work needed?

[GSi_PSi]

Rice.

[Dubstein]

iiiitss oveeer 13kkk!!!

[Super-DA9]

Anyone else get an infraction?? Lol

[p3akin]

for saying nice??

[Vvvtec]

Yeah lol

[CivicEGSI]

Splice.

[infurNOS]

oil and filter changed.

lubed bushings to try and fix a squeak but no success :(

[Indie]

Infractions for complimenting somebody's car? The mods here can just **** right off.

On topic: Nice.

[EKVTIR-T]

Infractions for complimenting somebody's car? The mods here can just **** right off.

On topic: Nice.
thats personal attack on moderators

[Indie]

thats personal attack on moderatorsNo, I don't know any of them personally, and didn't say anything personal about them whatsoever. There was absolutely nothing in what I said that could be construed as a "personal attack".

[nate92]

Nice.

[cbauto]

ww3

nice

[GSi_PSi]

what is wrong with


nice

[mocchi]

i thought it was cos ppl give rep on the nice posts

trololol

[hilarryous]

Pies.

[Dubstein]

Unbanned, yay

[cbauto]

nice.

[infurNOS]

tyre shine valve cover, came up brand new...

[PoDgE]

Not the best pic.
Put new wheels on 16x7 +35 Not the best wheels but they weigh 7.4Kg each with tyre so it made some decent weight saving.

http://i242.photobucket.com/albums/ff130/iwantboost/04160D66-146F-4031-8AF0-C063F26DAB44-266-0000001183D3B709.jpg

[Dubstein]

7.4kg with tires?? wtf

[PoDgE]

LOL .... typo, without tires they are 7.4 i haven`t measured them with tires

[dc2screama]

Weighed*

[infurNOS]

tyre shine valve cover, came up brand new...

before:

http://i930.photobucket.com/albums/ad144/munro88/Feature%20Ride/IMG_0719.jpghttp://i930.photobucket.com/albums/ad144/munro88/Feature%20Ride/IMG_0720.jpg

After:

http://i930.photobucket.com/albums/ad144/munro88/IMG_0811.jpg

[dc2r-0636]

Holly fuk^

[SuperJDM.]

spoon sox still fked up brah, 9/10

[mattsrea]

Helped brother drop his integra, only done the front though, will be doing the rears tomorrow

Running on Skunk2 Sport Shocks + Skunk2 Coilover sleeves. Overall ride comfort is alright considering we're used to stiff rides :)
http://img703.imageshack.us/img703/8004/20121211164449.jpg
http://img834.imageshack.us/img834/8986/20121211164508.jpg

[Dubstein]

Thats this nasty! In a good way of course

[mattsrea]

ahaha thanks dude, so far its just tucking, scraping everywhere and scraping cat converter each time we leave the driveway because we have those 2 layered ones, may need a plank of wood

[eLtrix]

Plank aint gna help yah! :P I cant believe i have never seen this integra around before.. considering i live pretty darn close to you. is it a itr?

[p3akin]

took my itr for a drive around the block for the first time in 8 months... damn do i miss driving it!

time to completely strip it

[Vvvtec]

Plank aint gna help yah! :P I cant believe i have never seen this integra around before.. considering i live pretty darn close to you. is it a itr?

Side moulds

[mattsrea]

Plank aint gna help yah! :P I cant believe i have never seen this integra around before.. considering i live pretty darn close to you. is it a itr?

ahaha well i layed sheets of like old blanket material on the driveway and it worked like a charm :) no scraping the cat when going on driveway because it just pulls the material. And yeah he barely drives his integra lol. Its a DC4 sadly.

[PHO]

Side moulds

dc2r with sidemolds stuck on. DeCeption2R

[mattsrea]

ahahaha, well finished off the suspensions and managed to install the rears

http://img233.imageshack.us/img233/3740/20121212120333.jpg

Heres how she sits
http://img171.imageshack.us/img171/8240/20121212122928.jpg

[mocchi]

why is it so low?
inb4stanceudontunderstand

[PHO]

why is it so low?
inb4stanceudontunderstand

http://www.ozhonda.com/forum/customavatars/avatar11984_24.gif

[mattsrea]

its not tucking or anything, sitting flush.

[CivicEGSI]

ahahaha, well finished off the suspensions and managed to install the rears
Heres how she sits.

We REALLY struggled to get out of the driveway
http://img233.imageshack.us/img233/3740/20121212120333.jpg


Dat rear jacked up. u try trick me?

[newpaddy3]

I looked at mine and contemplated shaving a little off the window wipers because they don't wipe water off the windscreen, they just smear it making it hard to see out of.

[mattsrea]

Dat rear jacked up. u try trick me?

if you read what i said i mentioned "and managed to install the rears" the second pic is how it sits -_-

[tripleuse]

ahahaha, well finished off the suspensions and managed to install the rears
Heres how she sits.

We REALLY struggled to get out of the driveway
http://img233.imageshack.us/img233/3740/20121212120333.jpg

how it sits? the back wheels are off the ground. riceboy.

[mattsrea]

if you read what i said i mentioned "and managed to install the rears" the second pic is how it sits -_-

[CivicEGSI]

looking nice bar the confusion

[Vvvtec]

took it for a drive for the first time

http://sphotos-f.ak.fbcdn.net/hphotos-ak-snc6/257648_10151375652435011_267630453_o.jpg

[eLtrix]

if you read what i said i mentioned "and managed to install the rears" the second pic is how it sits -_-


took it for a drive for the first time

http://sphotos-f.ak.fbcdn.net/hphotos-ak-snc6/257648_10151375652435011_267630453_o.jpg


How was it?


if you read what i said i mentioned "and managed to install the rears" the second pic is how it sits -_-

LOL at how many times you have to repeat this! And haha i like the carpet trick, i was going to do that myself... but to have to do that every morning just for more low... I dunno man :P. Eventually that material is gonna rip and you have to get a new one... The effort is strong in you!

[mattsrea]

LOL at how many times you have to repeat this! And haha i like the carpet trick, i was going to do that myself... but to have to do that every morning just for more low... I dunno man :P. Eventually that material is gonna rip and you have to get a new one... The effort is strong in you!
hahaha my material is strong dont worry, but yeah its alright i guess, i dont care about my cat because its going to be replaced soon since there was holes caused from previous owner.

[chipmunk]

Just purchased a Shark Antenna

[infurNOS]

Just purchased a Shark Antenna

I did the same, dressed up my car rather nicely

[chipmunk]

Has your one arrived yet? if so how long would it take?


I did the same, dressed up my car rather nicely

[infurNOS]

Has your one arrived yet? if so how long would it take?

Got it about a year ago, they are made to order so i think about 2 weeks?

[Ðerp]

Mine Doesn't even have an external aerial, It has some amplified thing that sits in the top of the windscreen

[Indie]

Mine Doesn't even have an external aerial, It has some amplified thing that sits in the top of the windscreenYeah, I want one of these. I'm planning on deleting the external aerial altogether. The stock one is dodgy, and I think the Shark Attack stick out like a sore thumb.

[quangsuke]

This was done today. $150 for the spot sprays (including paint)
Tomorrow we are cutting the clear from the whole car and giving it a buff.
Should look like new, will update this thread with photos.

PM ME if you need any work done.


BEFORE

http://imageshack.us/a/img26/1555/img3782d.jpg
http://imageshack.us/a/img339/2240/img3780m.jpg
http://imageshack.us/a/img541/871/img3781e.jpg


AFTER
http://imageshack.us/a/img690/6263/img3784gy.jpg
http://imageshack.us/a/img715/2999/img3787dm.jpg
http://imageshack.us/a/img841/5436/img3785y.jpg

[cbauto]

drove my car in last night's rain to wash it

[Cr0wbar]

Preparing my Skunk2 knob for Melbourne's hot weather tomorrow.

http://i.imgur.com/J1UC1.jpg

[Indie]

Washed my car, already a bit dirty the next day. **** it.

Want a cheap closed-door respray.

[202690]

Preparing my Skunk2 knob for Melbourne's hot weather tomorrow.

http://i.imgur.com/J1UC1.jpg

what are those white round things on your kick panel, may i ask :D

[EKVTIR-T]

speaker pods

[Cr0wbar]

speaker pods

Indeed, they're speakers coupled with the 8" Morel woofers in the doors. All put in by the previous owner. I don't know why my feet need music haha.

[Indie]

Indeed, they're speakers coupled with the 8" Morel woofers in the doors. All put in by the previous owner. I don't know why my feet need music haha.For when you're walking the beat?

...I'm leaving.

[CivicEGSI]

For when you're walking the beat?

...I'm leaving.

soup indie

[tripleuse]

soup indie

soup s15

[mocchi]

made dizzy conversion harness and reweld a flange that broke off

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1040226_zps9b017913.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1040247_zps545b8674.jpg

[nate92]

nicee

[cbauto]

nicee

[CivicEGSI]

soup s15

soup d15bR dc2.

[tripleuse]

soup d15bR dc2.

never heard of a d15br? ha ha must be a s15 thing.. dems15kids.

[CivicEGSI]

m8 ill fukin reck u. y u guys think i m s15 fgt :(

[Cartoon]

23766 tested my new cluster and gauges

[cbauto]

soup s15

any driveshafts for sale?

[tripleuse]

any driveshafts for sale?

yeah man special deal buy b series get d series free!!!!!!

[chubby steve]

finally had the car tuned
http://i814.photobucket.com/albums/zz67/roach1187/dc2dyno_zps7b664118.jpg

[DC2-PWR]

Wow good figures!!

[EKVTIR-T]

Impressive

[cbauto]

copy



















paste

[cbauto]

copy



















paste

[Cartoon]

So today I got my cluster all lit up 23845

[Dubstein]

l2postpics

[tripleuse]

finally had the car tuned
http://i814.photobucket.com/albums/zz67/roach1187/dc2dyno_zps7b664118.jpg

3 years of building paid off. Congrats.! Is this the built b18c2?

[Mikecivic78]

3 years of building paid off. Congrats.! Is this the built b18c2?

looks like it, it says it down the bottom of the dyno sheet

[chubby steve]

3 years of building paid off. Congrats.! Is this the built b18c2?


yep certainly is. not much loss of traction which im really happy about

[nate92]

thats some amazing figures for a b18c2!

[viinnh]

not mine but my mates
http://sphotos-a.ak.fbcdn.net/hphotos-ak-snc6/224495_4735195411191_2052733553_n.jpg
was getting ready to put cage in

[spn.fed]

sprayed and fitted my mugen wing with the brother :)

http://img401.imageshack.us/img401/7804/20130213151632.jpg (http://imageshack.us/photo/my-images/401/20130213151632.jpg/)

http://img690.imageshack.us/img690/7676/20130213151645.jpg (http://imageshack.us/photo/my-images/690/20130213151645.jpg/)

[nate92]

sprayed and fitted my mugen wing with the brother :)

http://img401.imageshack.us/img401/7804/20130213151632.jpg (http://imageshack.us/photo/my-images/401/20130213151632.jpg/)

http://img690.imageshack.us/img690/7676/20130213151645.jpg (http://imageshack.us/photo/my-images/690/20130213151645.jpg/)

is ur centre blade upside down?

[DC2-PWR]

is ur centre blade upside down?

+1
LOL. Definetly upside down

[spn.fed]

+1
LOL. Definetly upside down

thanks for the heads up. Will fix it up tomorrow xD

[vtec_yoo]

Washed this cutieee

[int5]

installed type R front bar and type S rims on my base model dc5

[infurNOS]

installed type R front bar and type S rims on my base model dc5

pics!!

[int5]

pics!!

I was lucky to find the same colour bumper :)
Type S rims

http://i47.tinypic.com/1zppcgn.jpg

http://i47.tinypic.com/1zfsfb5.jpg

[Vvvtec]

It almost matches :D Good stuff!

[dc2screama]

Washed up:p
http://img.tapatalk.com/d/13/02/27/4eqatanu.jpg

[Dubstein]

Black integras look so evil, it's awesome.

[dc2screama]

Dude it's Adriatic blue not black hahaha

[CivicEGSI]

http://media.tumblr.com/tumblr_m1vwioU1YW1qhcshf.jpg

[Dubstein]

Dude it's Adriatic blue not black hahaha

http://www.generatememes.com/media/created/mc75ph.jpg

[Mikecivic78]

Shiet, why does Honda always have some whack name for each colour, phoenix yellow, Milano red, pretentious

I just call that one DC2 navy blue

[Vvvtec]

Shiet, why does Honda always have some whack name for each colour, phoenix yellow, Milano red, pretentious

I just call that one DC2 navy blue

dont all manufactures have names for their colours?

[Mikecivic78]

dont all manufactures have names for their colours?

That's a good question, probably. Dunno about my car, I just use the paint code - 01G

[Vvvtec]

That's a good question, probably. Dunno about my car, I just use the paint code - 01G

haha i think you'll find they all have names and a code :p

[dc2screama]

silver surfer!^^:p

[Dubstein]

Use to work at a paint shop, most companys have different names for each colour sus kunts

[TweetR]

Installed about a month ago: Colour coded rear pods + side skirts and a wash!

http://imageshack.us/a/img825/2900/photo9ue.jpg

[newpaddy3]

Installed about a month ago: Colour coded rear pods + side skirts and a wash!

http://imageshack.us/a/img825/2900/photo9ue.jpg

Don't type r's already come with colour coded shit?

Looks good though. Only thing I'd change would be blue nuts, but it's your car so enjoy it.

[Vvvtec]

OPTIONAL skirts and pods. Probably came off another car.

Plus i think this guy painted the lip etc all black before? Or am i thinking of a different car? Haha

[TweetR]

Don't type r's already come with colour coded shit?

Looks good though. Only thing I'd change would be blue nuts, but it's your car so enjoy it.

Nope, they were an optional part when you bought the ITR, bought them off a private seller and painted/ repaired both skirts and pods to immaculate condition!

Yes lip and skirts were all purchased black, never had time to uninstall and paint but I did get around to it!

[infurNOS]

How much did it cost to paint the side skirts and rear pods?

[TweetR]

How much did it cost to paint the side skirts and rear pods?
Had a mate do them as a favor.. Probably cost around $2-300 depending on time spent on repair.

[infurNOS]

Had a mate do them as a favor.. Probably cost around $2-300 depending on time spent on repair.

sell to me when you want to get rid of them

[Vvvtec]

Looks perfect imo mate, great work :) :thumbsup:

[TweetR]

sell to me when you want to get rid of them

No worries, will be selling the R at the end of the year so will keep you in mind.

And thanks mate!

[newpaddy3]

No worries, will be selling the R at the end of the year so will keep you in mind.

And thanks mate!

Blasphemy!!

[TweetR]

Blasphemy!!

Unfortunately with work the R only does about 100k a week, so it's not worth paying the rego and keeping it parked in the garage taking up space.

[newpaddy3]

Unfortunately with work the R only does about 100k a week, so it's not worth paying the rego and keeping it parked in the garage taking up space.

http://24.media.tumblr.com/e7a2e6ee3f63ad3037b14f2c9724d7f9/tumblr_miwmfqRT5S1r25mxao1_500.gif

http://25.media.tumblr.com/93e81175d46a68676064f76a46c24462/tumblr_miwmf0xMso1r25mxao1_500.gif

[Setanta]

Unfortunately with work the R only does about 100k a week, so it's not worth paying the rego and keeping it parked in the garage taking up space.

LOL - mine has done less than 1K kms this year, but I'm not letting go of it. I might hit 43K this year :)

[infurNOS]

Dont see the point in buying a car without driving it?

An ITR NEEDS to be driven!

[TweetR]

LOL - mine has done less than 1K kms this year, but I'm not letting go of it. I might hit 43K this year :)

43k!? Must be a baby then! I wish I could afford keeping it..

[Setanta]

TweetR (http://www.ozhonda.com/forum/member.php?31093-TweetR): I bought it with 29K on it.


infurNOS (http://www.ozhonda.com/forum/member.php?13407-infurNOS): I don't disagree with you, but I'll be dammed if I'm leaving it in the work carpark (150+ teachers, 2000 students). She gets out, but only where I can look after her and enjoy myself. The E30 is general duties. (http://www.ozhonda.com/forum/member.php?13407-infurNOS)

[Super-DA9]

She gets out, but only where I can look after her and enjoy myself. The E30 is general duties. (http://www.ozhonda.com/forum/member.php?13407-infurNOS)

Bawss.

[aspirin_ash7]

**edit - this may belong in another section - sorry if i posted incorrectly - please move if needed :S **

DC5 2002 Base Model - Auto (dont hate - appreciate) - Integra - Work in progress.
Looking at doing a few small things for it.
let me know what you think!

mods/accessories:
5zigen Proracer A spec Exhaust
Rear Body Kit
Scoop Bonnet
Full Alpine Sound System (TypeR)
Racing Sparco JDM wheels

BEFORE

http://img845.imageshack.us/img845/7531/img0436xw.jpg (http://imageshack.us/photo/my-images/845/img0436xw.jpg/)
http://imageshack.us/a/img59/2217/integra2y.jpg
















.....AFTER
http://imageshack.us/a/img443/6596/integrab.jpg
http://imageshack.us/a/img13/2290/integra1v.jpg
http://imageshack.us/a/img15/7766/integra3z.png









Interior soon to come.

Thanks for looking!

[DA9-47]

i bought newer one lol
great condition for its age

http://i1190.photobucket.com/albums/z456/DA9-47/Mobile%20Uploads/IMG_8266.jpg

http://i1190.photobucket.com/albums/z456/DA9-47/Mobile%20Uploads/IMG_7901.jpg

love these cars

[mooshie]

Me too....

Was that the one with really low kms on car sales recently?

[Setanta]

Damn that looks clean - nice pick up.

[DA9-47]

Damn that looks clean - nice pick up.

cheers man, i thought so,
the inside needs a clean but aprt from that inside is near imac as well!!

http://i1190.photobucket.com/albums/z456/DA9-47/Mobile%20Uploads/IMG_5036.jpg
http://i1190.photobucket.com/albums/z456/DA9-47/Mobile%20Uploads/IMG_5953.jpg
http://i1190.photobucket.com/albums/z456/DA9-47/Mobile%20Uploads/IMG_8846.jpg

[DA9-47]

Me too....

Was that the one with really low kms on car sales recently?


hmm i wouldnt consider it really low k's lol, 250k
still thats only 12,500k per year on average lol

running smooth and looking good for 20+ years old :thumbsup:

it's for ma old ldy , she needs a car for about a year then it's mine;)
by then it might even be on 260k lol =)

been swapping most of my shit from my da onto her's,

will be stripping down my old gunmetal grey da soon so will be plenty of stuff 4sale in my 4sale thread.:wave:

[ivseenwars]

Put a deposit on a black vti-r today :)

[infurNOS]

Put a deposit on a black vti-r today :)

:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:

pics ASAP

[ivseenwars]

:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:

pics ASAP

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc7/601231_438651716218281_460161250_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/601498_438651689551617_1669185247_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/64138_438651702884949_151962259_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/601229_438651739551612_1371900079_n.jpg

[Vvvtec]

Nice! :D

[nguyeN]

spray painted my stocks black and put a universal lip under the type r lip

http://s8.postimage.org/aehnaed6d/image_1363227507024872.jpg

[typerdevil]

after having my old jdm one for 5 years lol it finally went bad so Today i got a SARD Hi-flow cat fitted , sounds mean :)

[infurNOS]

Looks very clean ivseenwars, good pickup!

[ivseenwars]

Looks very clean ivseenwars, good pickup!

Needs a good cut and polish which is nothing I can't do. Super happy with it. Brand new clutch too haha

[Jdm.]

Picked this up a few days ago! :)
http://img.tapatalk.com/d/13/03/15/e5u9u5uz.jpg

JDM DC5R! :D

[dc2screama]

Aahhh^ was on Carsales for a couple a months, wanted $30000k!
Clean and mean!

[dc2screama]

My bad, there's another jdm dc5r on Carsales in WA

[Jdm.]

My bad, there's another jdm dc5r on Carsales in WA

Yeah that ones been up for ages, I'm from melbourne. Curious to find out how many of these are in Aus!

[aspirin_ash7]

nice pick up JDM.
where you get it from if you dont mind me asking?

[Jdm.]

nice pick up JDM.
where you get it from if you dont mind me asking?

It was up on carsales for a matter of days, lucky I got in quickly.
The previous owner lived in the thornbury area

[PHO]

Nice car huy

[ivseenwars]

Sale fell through :(

[dc2screama]

^ what happen dude!?
I think I saw the ad for it on gumtree..

[EKVTIR-T]

Sale fell through :(but you already deposit

wat happen?

[PHO]

but you already deposit

wat happen?

inb4 seller crashed car.

[EG5]

http://farm9.staticflickr.com/8112/8553411965_cf35845656_b.jpg
Mugen DC5 front bumper + extra aerodynamic set up

[Blulude98]

After having these Victorian rego plates in storage i finally transferred them on my car today:
http://i38.photobucket.com/albums/e121/Blulude98/PAUL-PC/010_zps69607745.jpg

[EKVTIR-T]

how the hell did you get that

[Blulude98]

how the hell did you get that
I have had them for a very long time man!
I also have the rego VT3C if anyone is interested???

[ivseenwars]

but you already deposit

wat happen?

Got a RWC and upped the price to something I can't afford so I kept the deposit. Kinda wanna ditch and save for a DC2R

[chubby steve]

took the teg down 2 WSID 2nite pulled a best of 13.71. little bit of wheel spin. i reckon i can do beta though

[tripleuse]

well done steve, would like to see the completed car one day!!

[chubby steve]

dnt no whether 2 keep it or sell it 2 make way 4 the next project

[tripleuse]

dnt no whether 2 keep it or sell it 2 make way 4 the next project

depends on the next project? what is it?

[Demanufacturer]

tinted windows

[chubby steve]

was thinking turbo b18 ek i have a spare motor to work on

[mooshie]

24386

Dropped the 4 door on some coil overs for a DC works well except they are at max height in the rear.. I don't wanna be that low!

[Vvvtec]

http://www.ozhonda.com/forum/attachment.php?attachmentid=24386&d=1364214703

[IEVAQ8]

After having these Victorian rego plates in storage i finally transferred them on my car today:
http://i38.photobucket.com/albums/e121/Blulude98/PAUL-PC/010_zps69607745.jpg

i wouldnt b parking it anywhere out of your vision.... ;)

[Johnie]

Finshed the front end conversion today pretty happy with the result

Before:
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/730525_10151283013637102_1392725428_n_zps9278a4ff. jpg
After:
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/909118_10151360018182102_1557322447_n_zps3099ff0f. jpg

[mattsrea]

^^^ Looking good man! Planning on getting a lip for it or? Looks pretty naked without it :P

[dc2screama]

Dc2 photoshoot by Zero clearance..
Had some spare time on the weekend finally and met up with Arthur, one of the boys from zero clearance for a quick shoot around Albert park pits and track then a quick shoot at hosier lane before getting kicked out and told off by the workers there:p besides that the day was awesome!!
Thanks Arthur, you gotta sweet type s!!
Some of the photos.. Enjoy

http://img.tapatalk.com/d/13/04/08/ry7e4yde.jpg

http://img.tapatalk.com/d/13/04/08/a7yvuhup.jpg

http://img.tapatalk.com/d/13/04/08/jy8y5yba.jpg

http://img.tapatalk.com/d/13/04/08/3ugaza5a.jpg

http://img.tapatalk.com/d/13/04/08/2y2una9y.jpg

http://img.tapatalk.com/d/13/04/08/yha7ebuj.jpg

[p3akin]

very clean car!!

[ivseenwars]

Managed to get the DC2 I was looking at down to a good price. Deposit paid, picking up this weekend. woop

[dc2screama]

very clean car!!

Thanks rob

[nate92]

installed genuine recaros and replica takata 4 point harnesses. Stripped rear interior for it.

[Aydin]

Managed to get the DC2 I was looking at down to a good price. Deposit paid, picking up this weekend. woop

red one?

[ivseenwars]

red one?

na black

[ivseenwars]

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/521698_454865944596858_812917091_n.jpg
Took this thing home tonight

[The_Dream]

whats with the board behind the front licence plate? mine had that on when i bought my car too. i still dont know what the purpose for it is...

[ivseenwars]

whats with the board behind the front licence plate? mine had that on when i bought my car too. i still dont know what the purpose for it is...

No idea, but I took it off as soon as I got home lol.

Put new hatch struts in-
Old v New
http://img.tapatalk.com/d/13/04/20/maqyqe7y.jpg

Cleaned lettering-
http://img.tapatalk.com/d/13/04/20/emyqyva2.jpg

[ivseenwars]

Had some free time so treated it to a nice long detail :) wet sanded/buffed up some scratches on the boot and re skinned the whole car.

http://img.tapatalk.com/d/13/04/23/yjama3en.jpg
http://img.tapatalk.com/d/13/04/23/eganery3.jpg

4WD spec y0

[dc2r-0636]

2" lift kit

[ivseenwars]

2" lift kit

just needs muddies now

[3RotaRX]

Got OEM visors for my DC2 for $75 :)

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/11481_10201104130310188_396683585_n.jpg

[spn.fed]

^^wow. bargain! :D

[bronson11]

Got OEM visors for my DC2 for $75 :)

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/11481_10201104130310188_396683585_n.jpg

Where did you get them from? That's pretty awesome haha

They look good too!!

[3RotaRX]

Cheers guys, got them from Yahoo Japan =)

cleaned it with some plastic polish and dayumm it looks good!

[Giraffe]

Cheers guys, got them from Yahoo Japan =)

cleaned it with some plastic polish and dayumm it looks good!

haha damn i think i was gonna bid on that one, it was 20k yen yeah

[3RotaRX]

Cant remember, but i think the bid ended at 32k or something and then the shipping was like $20 and all other fees so it kinda added up..
Still a bargain though

[ivseenwars]

New parkers; they're whiter irl.
http://img.tapatalk.com/d/13/04/25/ajytyrym.jpg
Collecting fluids for service-
http://img.tapatalk.com/d/13/04/25/nanyjury.jpg
also got it insured.

[Johnie]

Picked up a dc2 vti-r from sydney, drove it home to melbourne
Getting it ready to do my 2nd jdm front conversion have the parts ready and panels happen to be same colour as the car :)
Just waiting on the grinder and wielder then im good to go, this time not gonna cut out the whole rad support only the t top part lmao stuffed up the first time and cut the whole rad support.

24650

24651

[cal]

Unbolted my exhaust from the cat to the rear section so mid section is gone. Fun for shits and giggles. Already annoying, it backfires pops, makes car shake and makes me deaf. Need to install straight pipe with large resonator. Also repainted front lip and painted wheel black with red lug nuts.

[ivseenwars]

drained and flushed coolant and added new stuff. Took me forever to find the drain plug :(

[chubby steve]

trial fitted my custom recaro seat rails. working at a metal factory has its perkshttp://i814.photobucket.com/albums/zz67/roach1187/IMAG0016_zpsb79b931f.jpg

[ivseenwars]

Went outside today.. glanced at my front wheel.. has a ****ing screw jammed into the tyre.. \:

[mattsrea]

Picked up a dc2 vti-r from sydney, drove it home to melbourne
Getting it ready to do my 2nd jdm front conversion have the parts ready and panels happen to be same colour as the car :)
Just waiting on the grinder and wielder then im good to go, this time not gonna cut out the whole rad support only the t top part lmao stuffed up the first time and cut the whole rad support.

24650

24651

What was so special about this dc2? Where did you pick it up from?

[Johnie]

What was so special about this dc2? Where did you pick it up from?
Nothing really special about it, only bought it coz it was the right price, its white and i have a white jdm front conversion parts sitting in my backyard which i have been trying to sell for ages with no luck, so im gonna convert the front end after that idk what im gona do with it as i already got a jdm front teg so this will be my 2nd one.

[eLtrix]

Nothing really special about it, only bought it coz it was the right price, its white and i have a white jdm front conversion parts sitting in my backyard which i have been trying to sell for ages with no luck, so im gonna convert the front end after that idk what im gona do with it as i already got a jdm front teg so this will be my 2nd one.

Aren't you trying to sell that jdm front converted dc2 already? The black/silver one?

[Johnie]

E
Aren't you trying to sell that jdm front converted dc2 already? The black/silver one?
Ive put an ad up but still no intrest

[mattsrea]

LOL maybe its abit pricey i don't know but yeah, goodluck for the 2nd build for this integra, imo keep the white one because white jdm fronts are **** nice!

[Jdm.]

New wheels :)
http://img.tapatalk.com/d/13/05/01/5asa4ejy.jpg

[chubby steve]

filled the tank up today god petrol is cheap $20 of E85 got me 18L woohoo

[Johnie]

Fitted 6000k hids to my jdm front headlights
Also bought bc br coil overs which i hopefully can fit tomorrow
oh and bought a rear visor too

[Evok]

Got these ready to install when i have time :)
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/944112_10151357300556290_645421834_n.jpg

And some flicks my mate took lol
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/936104_4793298642334_587087420_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/575426_4793298962342_1350768496_n.jpg

[Mikecivic78]

Very nice wheels and stance. how much was RCA kit if I may ask?

[tripleuse]

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/575426_4793298962342_1350768496_n.jpg

nice to see some pre faces, looks good.

[cph3r]

Energy Suspension master bushing kit arrived in the mail. Koni/Ground Control coilover setup shipped today. Springs at 430 front/350 rear. Can't wait!!

[ivseenwars]

Changed the oil..
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/11819_462985923784860_1102127868_n.jpg

[mattsrea]

Energy Suspension master bushing kit arrived in the mail. Koni/Ground Control coilover setup shipped today. Springs at 430 front/350 rear. Can't wait!!


How much was Koni/Ground Control? And where did you get? Ground control guys dont even reply back to me ><"
I was going to get somewhere between 450-500 front/350-400 rear because i like that stiffness.

[cph3r]

$1248 USD shipped. So a bit less after currency conversion. Ordered them direct through ground control. Sent them an email via the address supplied on their site. Customer service was exceptional I found. Quick to reply and hassle free.

[cph3r]

Made myself a crankshaft pulley holder tool!
http://i39.tinypic.com/154kg2t.jpg

[ivseenwars]

massive head****.. the guy i bought the car off never transferred the car into his name when he bought it, and never sent his transfer papers in when I bought it.. now car is unregistered and I didnt get the papers.. on the bright side, bought an unreg permit and booked it in for a rwc.. can you believe it only took me 1 minute to get onto a vicroads operator?

[cph3r]

Suspension arrived this morning :-D Giggity

[ivseenwars]

Storms coming, so gave it a good detail and re skinned it.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/401912_465873323496120_1922904759_n.jpg

[Super-DA9]

Storms coming, so gave it a good detail and re skinned it.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/401912_465873323496120_1922904759_n.jpg

Fuark this is looking mint. Can't wait to see a build thread ;)

[ivseenwars]

Fuark this is looking mint. Can't wait to see a build thread ;)

No point yet haha. Will have coils and a subframe brace under there pretty soon though!

[EKVTIR-T]

just get sum jdm rims and lower that thing son

forget the braces beaks bs

[ivseenwars]

just get sum jdm rims and lower that thing son

forget the braces beaks bs

lol asr brace, lca's and sway bar come as a package with tein street flex for $1200. beaks is pointless anyway?

[Mikecivic78]

lol asr brace, lca's and sway bar come as a package with tein street flex for $1200. beaks is pointless anyway?

yea, Beaks is pretty much just for looks.

[Evok]

Very nice wheels and stance. how much was RCA kit if I may ask?

Cheers, i brought them brand new delivered from u.s ...think around 200au.

[Evok]

Anyways, got bushes installed, big difference in handlng along with a front and rear camber kit installed
-2deg at front, 0toe.
-1.4def at rear 0.5mm

[ivseenwars]

Left it at the Mechanics for the RWC Test.. was below empty when i left so I had to get fuel and united only had Plus ULP \: Car runs like shit on it. Really hope i pass rwc though.

*Headlight adjustment, trans axel seal and front tyres for roady. Left the car there to have that fixed up and ordered 4 potenza re002's. :)*

[Johnie]

Installed 6000k HIDS and polished headlights
http://www.ozhonda.com/forum/attachment.php?attachmentid=24821&d=1368896883